减速箱体的镗φ52H8孔夹具设计及加工工艺含非标7张CAD图-版本2
减速箱体的镗52H8孔夹具设计及加工工艺含非标7张CAD图-版本2,减速,箱体,52,h8,夹具,设计,加工,工艺,非标,cad,版本
减速箱体的镗52H8孔夹具设计及加工工艺含非标7张CAD图-版本2需要咨询购买全套设计请加QQ1459919609-图纸预览详情如下:减速箱体毛坯图A1.dwg减速箱体零件图A1.dwg减速箱体零件工艺规程及镗52H8孔夹具设计.doc加工过程卡片.doc参考工艺规程设计夹具体.dwg夹具装配图.dwg定位板.dwg挡板.dwg支架.dwg文件清单.txt粗镗52mm孔工序卡片.doc设计副本铣削两工件的159mm两不同侧面工序卡片.doc减速箱体零件工艺规程及加工52H8孔夹具设计摘 要本次设计内容涉及了机械制造工艺及机床夹具设计、金属切削机床、公差配合与测量等多方面的知识。减速器箱体零件的工艺规程及其加工52H8孔的夹具设计是包括零件加工的工艺设计、工序设计以及专用夹具的设计三部分。在工艺设计中要首先对零件进行分析,了解零件的工艺再设计出毛坯的结构,并选 零件的加工 ,设计出零件的工艺 对零件 工 的工序进行 计 , 是 定出 工序的工艺装 及切削用量 进行专用夹具的设计,选 设计出夹具的 部件,如定位 件、夹 件、 件、夹具体与机床的 部件以及其 部件 计 出夹具定位 的定位 差,分析夹具结构的合与不,并在以 设计中currency1进。:工艺、工序、切削用量、夹 、定位、 差。ABSTRCTThis design content has involved the machine manufacture craft and the engine bed jig design, the metal-cutting machine tool, the common difference coordination and the survey and so on the various knowledge.The reduction gear box body components technological process and its the processing 52H8 hole jig design is includes the components processing the technological design, the working procedure design as well as the unit clamp design three parts. Must first carry on the analysis in the technological designto the components, understood the components the craft redesigns the semi finished materials the structure, and chooses the good components the processingdatum, designs the components the craft route; After that is carrying on the size computation to a components each labor step of working procedure, the key is decides each working procedure the craft equipment and the cutting specifications; Then carries on the unit clamp the design, the choice designs the jig each composition part, like locates the part, clamps the part, guides the part, to clamp concrete and the engine bed connection part as well as other parts; Position error which calculates the jig locates when produces, analyzes the jig structure the rationality and the deficiency, and will design in later pays attention to the improvement.Keywords: The craft, the working procedure, the cutting specifications, clamp, the localization, the error“ 中文摘要fi文摘要fl 工艺设计11.1零件分析 11.2 毛坯的选 与设计及 的定 11.3工艺规程的设计 3 工序设计 62.1工序 与毛坯 的定 62.2设 工艺装 的选 72.3切削用量与 定 9三 专用夹具的设计 153.1夹具的设计153.2夹 装的 及设计要163.3镗” 装的设计173.4切削与夹 的计 193.5 定位 差的分析243.6夹具设计与 的要 253.7夹具结构设计的分析与currency1进26 结27参考文2930
收藏