减速箱体的镗φ50、φ82孔夹具设计及加工工艺含4张CAD图
减速箱体的镗50、82孔夹具设计及加工工艺含4张CAD图,减速,箱体,50,82,夹具,设计,加工,工艺,cad
减速箱体的镗5、082孔夹具设计及加工工艺含4张CAD图需要咨询购买全套设计请加QQ1459919609-图纸预览详情如下:减速箱体毛坯图A1.dwg减速箱体零件图A1.dwg加工过程卡.doc参考工艺规程设计-若不要请删除.doc工序卡片25.doc工序卡片35.doc工序卡片45.doc工序卡片50.doc工序卡片55.doc工序卡片90.doc工艺规程设计.doc文件清单.txt箱体零件图(副本)A0.dwg设计副本镗孔夹具体.dwg镗孔夹具装配图.dwg摘 要本次设计内容涉及了机械制造工艺及机床夹具设计、金属切削机床、公差配合与测量等多方面的知识。减速箱体加工工艺规程及夹具设计是包括零件加工的工艺设计、工序设计以及专用夹具的设计三部分。在工艺设计中要首先对零件进行分析,了解零件的工艺再设计出毛坯的结构,并选择好零件的加工基准,设计出零件的工艺路线;接着对零件各个工步的工序进行 计 , 是 出各个工序的工艺装 及切削用量; 进行专用夹具的设计,选择设计出夹具的各个 部件,如 件、夹 件、 件、夹具体与机床的接部件以及 部件;计 出夹具 的 差,分析夹具结构的合 与不 ,并在以 设计中 进。:工艺、工序、切削用量、夹 、 、 差。ABSTRCTThis design content has involved the machine manufacture craft and the engine bed jig design, the metal-cutting machine tool, the common difference coordination and the survey and so on the various knowledge.The reduction gear box body components technological process and its the processing hole jig design is includes the components processing the technological design, the working procedure design as well as the unit clamp design three parts. Must first carry on the analysis in the technological designto the components, understood the components the craft redesigns the semi finished materials the structure, and chooses the good components the processingdatum, designs the components the craft route; After that is carrying on the size computation to a components each labor step of working procedure, the key is decides each working procedure the craft equipment and the cutting specifications; Then carries on the unit clamp the design, the choice designs the jig each composition part, like locates the part, clamps the part, guides the part, to clamp concrete and the engine bed connection part as well as other parts; Position error which calculates the jig locates when produces, analyzes the jig structure the rationality and the deficiency, and will design in later pays attention to the improvement.Keywords: The craft, the working procedure, the cutting specifications, clamp, the localization, the error 摘 要 1ABSTRCT 2序 1 零件分析 21.1零件的用 21.2零件的工艺分析 2 工艺规程设计42.1 毛坯的制造currency1 42.2 基面的选择 42.3 制 工艺线路 52.4 切削用量7三 镗床夹具设计 193.1 工件加工工艺分析193.2 方“及 件设计 193.3 夹 方“及夹 件设计 203.4 镗的与fifl203.5 夹具体的设计 203.6 镗套的设计 213.7切削 及夹 计 233.8 夹具fl分析计 263.9 镗孔夹具的装配 28结 29 30参 考 文 31
收藏