许厂煤矿3.0 Mta新井设计含5张CAD图.zip
许厂煤矿3.0 Mta新井设计含5张CAD图.zip,许厂煤矿3.0,Mta新井设计含5张CAD图,煤矿,3.0,Mta,设计,CAD
任务书任务下达日期:20XX年1月8日毕业设计日期:20XX年3月12日 至 20XX年6月8日毕业设计题目: 许厂煤矿3.0 Mt/a新井设计毕业设计专题题目: 煤巷锚杆支护技术研究毕业设计主要内容和要求:以实习矿井许厂煤矿条件为基础,完成许厂煤矿3.0Mt/a新井设计。主要内容包括:矿井概况、矿井工作制度及设计生产能力、井田开拓、首采区设计、采煤方法、矿井通风系统、矿井运输提升等。结合煤矿生产前沿及矿井设计情况,撰写一篇关于煤巷锚杆支护技术研究的专题论文。完成与采矿有关的科技论文翻译一篇,题目为“Control of gas emissions in underground coal mines ”,论文3635字符。院长签字: 指导教师签字:摘 要本设计包括三个部分:一般部分、专题部分和翻译部分。一般部分为许厂矿3.0 Mt/a新井设计。许厂矿位于济宁市济宁煤田的东北部,交通较为便利。井田倾向(东西)长约4 km,走向(南北)长约8 km,井田总面积为32.3 km2。主采煤层为3下煤层,平均倾角为10,煤层平均厚度为8.8 m。井田地质条件较为简单。井田工业储量为357.33 Mt,矿井可采储量262.4 Mt 。该矿井服务年限为62.5 a,矿井正常涌水量为1387m3/h,最大涌水量为1928 m3/h。矿井瓦斯相对涌出量为0.49m3/t,属低瓦斯矿井。井田为立井两水平开拓加暗斜井延伸;长壁放顶煤采煤法;矿井通风方式为前期中央并列式,后期两翼对角式。矿井年工作日为330d,工作制度为“三八”制。一般部分共包括10章:1.矿区概述及井田地质特征;2.井田境界和储量;3.矿井工作制度及设计生产能力、服务年限;4.井田开拓;5.准备方式-盘区巷道布置;6.采煤方法;7.井下运输;8.矿井提升;9.矿井通风与安全技术;10.矿井基本技术经济指标。专题部分的题目为煤巷锚杆支护技术研究,主要针对国内外锚杆支护现状及其支护理论的一些探讨研究。翻译部分主要内容为煤矿井下瓦斯涌出控制的一些内容,英文题目为:Control of gas emissions in underground coal mines。关键词:许厂矿井;两水平开拓;锚杆支护;瓦斯涌出ABSTRACTThis design includes of three parts: the general part, special subject part and translated part. The general part is a new design of Xuchang mine which designed productive capacity is 3.0 Mt percent year. Xuchang mine lines in north-east of Jining , Shandong province. The traffic of road and railway is convenience to the mine. The width of the minefield is 4 km and the width is about 8 km, the well farmland total area is 32.3km2.The three is the main coal seam, and its average dip angle is 10 degree. The thickness of the mine is about 8.8 m in all. The proved reserves of the minefield are 357.33 Mt. The recoverable reserves are 262.4 Mt. The service life of the mine is 62.5 years. The normal flow of the mine is 1387 m3 percent hour and the max flow of the mine is 1928 m3 percent hour. The mine gas emission rate is 0.49 m3/t which can be recognized as low gas mine. The well farmland is two levels in combined development of vertical shaft and later slope; the cole mine is the longwall mining; the way of mine ventilation for the central paratactic type, later two wings diagonal type The working system “three-eight” is used in the Xuchang mine. It produced 330 d/a.This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.development engineering of coalfield; 5.The layout of panels; 6. The method used in coal mining; 7. Transportation of the underground; 8.The lifting of the mine; 9. The ventilation and the safety operation of the mine; 10.The basic economic and technical norms.The topic of Special subject parts is bolt-anchor cable technology research. Mainly aims at the bolt support in our country and abroad present situation and some theory research of supporting.The main content of translation is the control of coal mine underground gas emission somet .English topic is: Control of gas emissions in underground coal mines.Keyword: Xuchang mine; two levels; Bolt support; Gas emission
收藏
编号:4719975
类型:共享资源
大小:1.91MB
格式:ZIP
上传时间:2020-01-11
50
积分
- 关 键 词:
-
许厂煤矿3.0
Mta新井设计含5张CAD图
煤矿
3.0
Mta
设计
CAD
- 资源描述:
-
许厂煤矿3.0 Mta新井设计含5张CAD图.zip,许厂煤矿3.0,Mta新井设计含5张CAD图,煤矿,3.0,Mta,设计,CAD
展开阅读全文
- 温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 装配图网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
装配图网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。