LED导光柱注塑模具设计【说明书+CAD】
购买设计请充值后下载,资源目录下的文件所见即所得,都可以点开预览,资料完整,充值下载可得到资源目录里的所有文件。【注】:dwg后缀为CAD图纸,doc,docx为WORD文档,原稿无水印,可编辑。具体请见文件预览,有不明白之处,可咨询QQ:12401814
编号无锡太湖学院毕业设计(论文)相关资料题目: LED导光柱注塑模具设计 信机 系 模具设计与制造专业学 号: 0923259学生姓名: 谢兵兵 指导教师: 范圣耀 (职称:副教授 ) (职称: )2013年5月25日目 录一、毕业设计(论文)开题报告二、毕业设计(论文)外文资料翻译及原文三、学生“毕业论文(论文)计划、进度、检查及落实表”四、实习鉴定表无锡太湖学院毕业设计(论文)开题报告题目: LED导光柱注塑模具设计 信机 系 模具设计与制造 专业学 号: 0923259 学生姓名: 谢兵兵 指导教师: 范圣耀 (职称:副教授) (职称: )2012年11月25日 课题来源经学校老师的介绍,我在无锡某模具厂实习,该厂大批量生产导光柱,经过几个月时间的亲身实践,我对导光柱的尺寸以及加工的流程都有了一定程度的了解,因此选择自己熟悉的产品作为毕业论文的课题是一个明智的选择。科学依据(包括课题的科学意义;国内外研究概况、水平和发展趋势;应用前景等) (1)课题科学意义塑料模具在现代生活中的地位越来越高,因此对塑料模具质量的要求也越来越高,这就要求塑料模具的开发、设计与制造的水平也必须越来越高。各种塑料模具越来越趋于微型化、精密化,其零件结构设计中的槽逢孔尺寸要求在0.3mm以下,尺寸精度要求越来越高。如BP机中零件尺寸极其微小,对模具的要求更高。这类微型冲件和塑件用的模具,已成为高技术模具或专利型模具。随着现代化工业和科学技术的发展,塑料模具的应用越来越广泛,其适应性也越来越强。已成为工业国家制造工艺水平的标志和独立的基础工业体系。(2)国内外研究概况、水平和发展趋势当前来看,国内塑料模具市场以注塑模具需求量最大,其中发展重点为工程塑料模具。近来我国模具工业发展迅速,前景光明。以上海为主的长三角洲地区是中国塑料模具工业最为发达的地区。目前相当多的发达国家塑料模具企业移师中国,是国内塑料模具工业迅速发展的重要原因之一。中国技术人才水平普遍提高以及平均劳动力成本低都是吸引外资的优势,这些都是塑料模具市场迅速成长的重要因素所在,所以中国塑模市场的前景一片光明。近几年来,虽然我国塑料模具无论是在数量上,还是在质量、技术和能力等方面都有了很大发展,但总体上还是与工业发达的国家相比仍有较大的差距。例如,许多先进的技术如CADCAECAM技术的普及率还不高。另外,我国塑料模具行业与其发展需要和国外先进水平相比,还存在很多方面的问题。现在应用模具CADCAM技术设计模具已较为普遍,随着通用机械CAD/CAM技术的发展,塑料注射模CAD/CAM已经不断的深化。现代模具是多学科知识集聚的高新技术产业的一部分,是国民经济的装备产业,其技术、资金与劳动相对密集。研究内容 分析零件工艺用途及结构; 掌握注塑模具的原理; 了解注塑模具的各种结构以及各自的特点; 掌握注塑模具上各个部分的作用; 对于注塑模具设计,能够掌握模具中各个部分的设计原则以及合理分析各因素对设计的影响。 拟采取的研究方法、技术路线、实验方案及可行性分析在毕业实习调研以及查阅有关资料的基础上,结合零件的外形及加工要求,可以先分析本课题的装配图以及各部分零件图,然后通过工艺性分析,分别进行成型部分的设计、浇注系统的设计、导向机构的设计、推出机构的设计、排气系统的设计等等,最后设计出来的制件还要通过相应的检验。 研究计划及预期成果研究计划:2012年11月12日-2012年12月2日:按照任务书要求查阅论文相关参考资料,填写毕业设计开题报告书。2012年12月3日-2013年3月1日 :填写毕业实习报告。2013年3月4日-2013年3月14日 :按照要求修改毕业设计开题报告。2013年3月15日-2013年3月21日:学习并翻译一篇与毕业设计相关的英文材料。2013年3月22日-2013年4月11日:注塑模具正文设计。2013年4月12日-2013年4月25日:绘制装配图和零件图。2013年4月26日-2013年5月20日:毕业论文撰写和修改工作。预期成果:通过不同方案的比较,以及考虑不同因素的影响,最后确定合理的LED导光柱注塑模具设计方案,该方案能够最大程度地满足使用要求。特色或创新之处(1)适用于本厂的某生产线的优化设计;(2)在不影响加工精度的前提下最大限度的减少成本,并降低工人的劳动强度和生产成本;(3)本课题的在满足使用要求的同时,充分考虑产品的外形美观。已具备的条件和尚需解决的问题(1)设计思路已经非常明确,对注塑模具的设计流程有充分的认识;(2)通过四年的大学学习,我已经积累了一定的相关方面的经验;(3)学院图书馆收藏了许多有关专业方面的知识书籍和期刊等;(4)虽然在老师的指导下设计了相应的方案,但是依然会有某些因素没有充分考虑,另外产品能否符合人们的要求也依然未知。指导教师意见 指导教师签名:年 月 日教研室(学科组、研究所)意见 教研室主任签名: 年 月 日系意见 主管领导签名: 年 月 日Chinas plastic mold industry and its development trendFirst: chinas plastic mold industryChinas industrial plastic moulds from the start to now, after more than half a century, there has been great development, mold levels have been greatly enhanced. Mould has been at large can produce 48-inch big-screen color TV Molded Case injection mold, 6.5 kg capacity washing machine full of plastic molds, as well as the overall car bumpers and dashboards, and other plastic mould precision plastic molds, the camera is capable of producing plastic mould , multi-cavity mold small modulus gear and molding mold. -Such as Tianjin and Yantai days Electrical Co., Ltd Polaris IK Co. manufactured multi-cavity mold VCD and DVD gear, the gear production of such size precision plastic parts, coaxial, beating requirements have reached a similar foreign the level of product, but also the application of the latest gear design software to correct contraction as a result of the molding profile error to the standard involute requirements. Production can only 0.08 mm thickness of a two-cavity mold and the air Cup difficulty of plastic doors and windows out of high modulus, and so on. Model cavity injection molding manufacturing accuracy of 0.02 to 0.05 mm, surface roughness Ra0.2 m, mold quality, and significantly increase life expectancy, non-hardening steel mould life up to 10 30 million, hardening steel form up to 50 10 million times, shorten the delivery time than before, but still higher than abroad.The present condition of the plastic mould level at home and abroad:The whole, China plastic mould whether in quantity, or in quality, technology and ability has made a great progress, but with the needs of the development of the national economy, the world advanced level, compared to a gap still. Some large, sophisticated, complex, the long life of high-grade plastic mould still need to import a lot of every year. In the total amount of demand exceeding supply at the same time, some cheap plastic mold but supply exceeds demand, market competition is intense, and some technical content is too high middle-grade plastic mould also has the trend of supply exceeds demandJoining the WTO, plastic mold and die industry to bring huge challenge, at the same time bring more opportunities. Because of Chinas cheap plastic mold to products, product price obvious advantages, some even only 1/5 of the price the foreign product one third to, to join the WTO, foreign similar products to domestic little impact, and cheap Chinese exports of mould is increase; In the high precision mould, before joining the WTO was mainly rely on imports, join WTO, not only for the exquisite products import has brought more convenient, but also lead to more foreign investment to China factory, bring foreign advanced mould technology and management experience, to cultivate Chinese professional mould talents to the role.In recent years, Chinese plastic mould manufacturing conditions have improved greatly. Large plastic mould has produced single set of weight can up to 50 tons of injection mold, precision plastic mould has reached the accuracy of 2 m, precision parts high small module gear mould and reach the requirements of the highlights learn lamp mould etc has also can produce, plastic mold cavity has been able to produce a mode of plastic mold cavity 7800, high-speed mold production speed can have up to 6 m/min above the high-speed plastic different profile extrusion die and the dual chamber co-extrusion profiles, double-color coextrusion, soft hard co-extrusion, were crowded, again of extrusion and low foaming raw steel-plastic co-extrusion, etc. Various kinds of mold. In the production means, mould enterprise equipment to numerical control rate has increased greatly, CAD/CAE/CAM technology has greatly expanded the applications, high speed processing and RP/RT adoption of advanced technologies such as has been more and more, standard mould using coverage and die commercialization rate is greatly improved, the share of mould of hot flow path are improved greatly. In addition, foreign invested enterprise vigorous development of further promoted the plastic mould design and manufacture level and improve the management level of enterprises, some enterprise already informatization management and digital no PIC manufacturing.As mould design and processing enterprises to raise the level of, mould manufacturing is from the past relies mainly on the transformation of the skills of fitter mainly rely on technology. This is not only the means of production change, and change the way of production and the rise of the concept. This is a trend that the standardization of mould continuous improvement, the precision of more and more high, production cycle is more and more short, fitter proportion more and more low, and finally promote the overall level of the die and mould industry is rising. China mold and die industry at present more than 10 national high and new technology enterprise, about 200 high technology and new technology enterprise. And adapt to the trend, the main production mold backbone strength from skill talented person gradually into technology talents is an inevitable requirement. Of course, now and for quite a long time, and highly talented person still very important, because after all, hard to get rid of mould to skill depend on.Existing main problemsChina plastic mould industry and foreign standards, mainly exist in the following questions.(1) the unbalanced development, product overall level is low. Although the individual enterprise products has reached or come close to the advanced international level, but overall, the accuracy, the roughness of the cavity surface, production cycle, life index and international advanced level there is a big gap between compared. Including production mode and the overall level of enterprise management, with foreign industrial developed countries there are compared for more than 10 years the gap.(2) process equipment backward, organization and coordination ability is poor. Though some of the technological transformation of the enterprise after in recent years, has been more advanced technology and equipment level, some of the foreign invested enterprise level of equipment is not behind abroad, but most of the enterprise process equipment is still lag behind. More importantly, the enterprise organization coordinated ability is poor, difficult to integrate or transfer of social resources use, thus it will be difficult to undertake larger projects.(3) most enterprise development ability is weak, the innovation ability is not enough. On the one hand, low level of technical personnel proportion is not quite high, on the other hand is the scientific development less input; More important concepts backward, insufficient attention to innovation and development. Mould enterprise not only to pay attention to the development of the mould, also want to pay attention to the innovation of the product.(4) short-term relief to the contradiction between supply and demand. In recent years, domestic plastics mould domestic market meet rate has been less than 74%, including a large, precision, long life mold meet more rate low, less than 60% estimate. Meanwhile, industrial developed countries are accelerating the mould transferring to China, international purchasing more and more, the international market has a good prospect. The market demand, production is difficult to keep up with development at that time, in short supply situation will continue for a period of time.There are many reasons which creates the above disparity ,the mold long-term has not obtained the value besides the history in as the product which should have, as well as the most state-owned enterprises mechanism cannot adapt the market economy, but also has the following several reasons: .(1) Country to mold industry policy support dynamics also insufficientlyAlthough the country already was clear about has promulgated the mold profession industrial policy, but necessary policy few, carried out dynamics to be weak. At present enjoyed the mold product increment duty enterprise nation 185, the majority enterprise still the tax burden is only overweight. The mold enterprise carries on the technological transformations introduction equipment to have to pay the considerable amount the tax money, affects the technology advancement, moreover privately operated enterprise loan extremely difficult .(2) Talented person serious insufficient, the scientific research development and the technical attack investment too urine Mold profession is the technology, the fund, the work crowded industry, along with the time progress and the technical development, grasps the talented person which and skilled utilizes the new technology exceptionally short, the high-quality mold fitter and the enterprise management talent extremely is also anxious. Because the mold enterprise benefit unsatisfactory and takes insufficiently the scientific research development and the technical attack, the scientific research unit and the universities, colleges and institutes eye stares at is creating income, causes the mold profession invests too few in the scientific research development and the technical attack aspect, causes the mold technological development step not to be big, progresses not quick .(3) The craft equipment level to be low, also necessary is not good, the use factor low recent years our country engine bed profession progressed quickly, has been able to provide the quite complete precision work equipment, but compared with the overseas equipment, still had a bigger disparity. Although the domestic many enterprises have introduced many overseas advanced equipment, but the overall equipment level low are very more than the overseas many enterprises. As a result of aspect the and so on system and fund reason, introduces the equipment not necessary, the equipment and the appendix not necessary phenomenon are extremely common, the equipment utilization rate low question cannot obtain the comparatively properly solution for a long time .(4) Specialization, standardization, commercialized degree low, the cooperation ability Because receives large and complete small and entire the influence since long ago, mold specialization level low, the specialized labor division is not careful, the commercialized degree is low. At present domestic every year produces mold, commodity mold minister 40% About, other for from produce uses for oneself. Between the mold enterprise cooperates impeded, completes the comparatively large-scale mold complete task with difficulty. Mold standardization level low, mold standard letter use cave rare is low also to the mold quality, the cost has a more tremendous influence, specially has very tremendous influence .(5) To the mold manufacture cycle) the mold material and the mold correlation technology falls The mold material performance, the quality and the variety question often can affect the mold quality, the life and the cost, the domestically produced molding tool steel and overseas imports the steel products to compare has a bigger disparity. Plastic, plate, equipment energy balance, also direct influence mold level enhancement .Process, the multi-material plastic molding die, efficient multicolor injection mould, inserts exchange structure and core pulling Stripping the innovative design has also made great progress. Gas-assisted injection molding, the use of more mature technologies, such as Qingdao Hisense Co., Ltd., Tianjin factory communications and broadcasting companies, such as mold manufacturers succeeded in 29 34-inch TV thick-walled shell, as well as some parts on the use of gas-assisted mould technology Some manufacturers also use the C-MOLD gas-assisted software and achieved better results. Prescott, such as Shanghai, such as the new company will provide users with gas-assisted molding equipment and technology. Began promoting hot runner mold, and some plants use rate of more than 20 percent, the general heat-thermal hot runner, or device, a small number of units with the worlds advanced level of rigorous hot runner-needle device, a small number of units with World advanced level of rigorous needle-hot runner mould. However, the use of hot runner overall rate of less than 10%, with overseas compared to 50 80%, the gap larger.In the manufacturing technology, CAD / CAM / CAE technology on the level of application of a new level to the enterprise for the production of household appliances representatives have introduced a considerable number of CAD / CAM systems, such as the United States EDS UG , the United States Parametric Technology Pro / Engineer, the United States CV CADS5 company, the British company DOCT5 Deltacam, HZSs CRADE Japan, the companys Cimatron Israel, the United States AC-C-Tech Mold Company and Australias MPA Mold flow Mold analysis software, and so on. These systems and the introduction of the software, although a lot of money spent, but in our country die industry, and achieving a CAD / CAM integration, and to support CAE technology to forming processes such as molding and cooling, such as computer simulation, and achieved certain The technical and economic benefits, promote and facilitate Chinas CAD / CAM technology. In recent years, Chinas own development of the plastic mould CAD / CAM system has achieved significant development, the main guarantor Software Engineering Institute, is the development of CAXA, Huazhong University of Science HSC5.0 development of the system and injection mold CAE software, and so on, these Die of domestic software with the specific circumstances in the application of computer and lower prices, and other characteristics, in order to further universal CAD / CAM technology has created good conditions.In recent years, China has been more extensive use of some new plastic mold steel, such as: P20, 3Cr2Mo, PMS, SM , SM , and the quality of life of mold has a direct significant impact on the overall use of the still less . Plastic Moulds standard model planes, such as standard putter and spring has given more applications, and there have been some of the commercialization of domestic hot runner system components. However, at present China Die level of standardization and commercialization in the general level of below 30 percent and foreign advanced industrial countries has reached 70 percent compared to 80 percent, still a large gap. Table 1, at home and abroad plastic mould technology comparison table? Domestic projects abroad cavity injection model mm0.02 accuracy of 0.005 0.01 0.05mm cavity surface roughness Ra0.01 0.05 mRa0.20 m non-hardened steel die life 10 to 60 million 10 30 million hardened steel die life 160 300 million of 50 100 million hot runner mould overall utilization rate of more than 80 per cent less than 10 per cent level of standardization of 70 80% less than 30% of medium-sized plastic mould production cycle about a month 2 4 months in the mold industry in the amount of 30 to 40% 25 to 30% According to the parties concerned forecast, the markets overall vigorous mold is a smooth upward, in the next Die market, the development of plastic mould faster than the other Die, die in the proportion of industry will gradually improve. With the continuous development of the plastics industry, put on the plastic mold growing demands is a normal, and so sophisticated, large-scale, complex, long-life plastic mould development will be higher than the overall pace of development. At the same time, imports in recent years because of the mold, precision, large, complex, long-life die in the majority, therefore, reduce imports, increase Guochanhualu: perspective, in the mold of such high-end market share will gradually increase. The rapid development of the construction industry so that the various Profile Extrusion Die, PVC plastic pipe fittings Die Die market become a new economic growth point, the rapid development of highways, car tires also put a higher demand, radial tire Die, Die particularly active pace of development will also be higher than the overall average level of the plastic and wood, plastic and metal to make plastic molds in the automotive, motorcycle industry in the demand for huge household appliances industry in the 10th Five-Year Plan period have greater development, especially refrigerators, air-conditioners and microwave ovens, and other parts of the great demand for plastic moulds, and electronics and communications products, in addition to audio-video products, such as color televisions, laptop computers and set-top boxes will be given a wider network development, which are Plastic Mold market is the growth point.Second:the direction
收藏