欧洲结构钢标准

《欧洲结构钢标准》由会员分享，可在线阅读，更多相关《欧洲结构钢标准（13页珍藏版）》请在装配图网上搜索。

1、欧洲结构钢标准(EN structural steel standards)ANSI | BS | DIN | EN | GB | ISO | JIS | NF |DIC编亏中文名称英文名称EN 10025-1993热轧非合金结构钢制品交货技术条件Hot rolled products of non-alloy structural steels; technical delivery conditions (includes amendment A1:1993)EN 10034-1993I字型和H型结构 钢形状和尺寸 公差Structural steel I and H sections;

2、tolerances on shape and dimensionsEN 10113-1-1993可焊细晶粒结构钢的热轧制品第1部分：一M交货条件Hot-rolled products in weldable fine grain structural steels;Part 1: General delivery conditionsEN 10113-2-1993可焊细晶粒结构 钢的热轧制品第2部分：正火 轧制钢的交货条 件Hot-rolled products in weldable fine grain structural steels- Part 2: Delivery condit

3、ions for normalized rolled steelsEN10113-3-1993可焊细晶粒结构钢的热轧制品第3部分：热轧钢的交货条件Hot-rolled products in weldable fine grain structural steels-Part 3:Delivery conditions for thermomechanically rolled steelsEN 10137-1-1995调质或沉淀硬化状态下高屈服强Plates and wide flats made of high yield度结构钢制薄板 和宽扁钢第1 部分：一般交货 条件strength

4、structural steels in the quenched and tempered or precipitationhardened conditions - Part 1: General delivery conditionsEN 10137-2-1995调质或沉淀硬化 状态下高屈服强 度结构钢制薄板 和宽扁钢第2 部分：调质钢的 交换条件Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened

5、 conditions - Part 2: Delivery conditions for quenched and tempered steelsEN 10137-3-1995调质或沉淀硬化 状态下高屈服强 度结构钢制薄板 和宽扁钢第3 部分：沉淀硬化 钢的交货条件Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions fo

6、r precipitation hardened steelsEN 10155-1993改进的抗大气腐 蚀的结构钢交 货技术条件Structural steels with improved atmospheric corrosion resistance-Ttechnical delivery conditionsEN 10210-1-19941非合金及细晶粒结构钢的热轧结 构空心型材交货技术条件Hot finished structural hollow sections of non-alloy and fine grain structural steels; part 1: tech

7、nical delivery requirementsEN 10210-2-1997非合金及细晶粒 结构钢的热轧结 构空心型材第 2部分：公差、尺 寸和截面特性Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional propertiesEN 10225-2001固定海上结构用 的可焊接结构钢 交货技术条件Weldable structural steels for fixed offsh

8、ore structures - Technical delivery conditionsEN 10238-1996自动喷砂活理和 自动涂底漆结构 钢制品Automatically blast-cleaned and automatically prefabrication primed structural steel productsprEN 10025-1-2000热轧结构钢制品 第1部分：一M 交货条件Hot rolled products of structural steels - Part 1: General delivery conditionsprEN 10025-2-2

9、000热轧结构钢制品 第2部分:非合 金结构钢的交货 技术条件Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steelsprEN 10025-3-2000热轧结构钢制品 第3部分：正火/ 正火轧制可焊接 细晶结构钢的交 货技术条件Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normal

10、ized rolled weldable fine grain structural steelsprEN热轧结构钢制品Hot rolled products of10025-4-2000第4部分：热轧 制可焊细晶粒结 构钢的交货技术 条件structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steelsprEN 10025-5-2000热轧结构钢制品 第5部分：改进 的抗大气环境腐 蚀结构钢的交货 技术条件Hot

11、rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistanceprEN 10025-6-2000热轧结构钢制品 第6部分：经淬 火和回火处理的 具有高屈服强度 的结构钢板材制 品的交货技术条 件Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat

12、 products of high yield strength structural steels in the quenched and tempered conditionprEN 10326-2002连续热浸镀结构钢带和薄钢带交货技术条件Continuously hot-dip coated structural steels strip and sheet -Technical delivery conditions编中文名称英文名称德国结构钢标准(DIN structural steel standards)ANSI | BS | DIN | EN | GB | ISO | JIS

13、 | NF |DIC编亏中文名称英文名称DIN 1623-2-1986扁平钢制产品； 冷轧薄钢板和钢 带.交付技术状 态.一般用途结 构钢Steel flat products;cold reduced sheet and strip; technical delivery conditions;general purpose structural steelsDIN 50969-1990高强度结构钢部 件耐氢诱导易脆 断裂的特性.用 支柱试验和预防 性测量法进行监 测Testing of high-strength steel building elements for resistance

14、 to hydrogen-induced brittle fracture and advice on the prevention of such fractureDIN 5512-1-1997有轨车辆材料. 钢.第1部分：热 轧结构钢和耐气 候腐蚀结构钢. 选用标准Materials for rail vehicles - Steels - Part 1: Structural steels and structural steels with improved atmospheric corrosion resistance, hot rolled; selected standardD

15、IN 5512-4-1997有轨机车用材料.钢.第4部分： 细晶粒结构钢.选用标准Materials for rail vehicles - Steels - Part 4: Fine grain structural steels; selected standardDIN 7079-1Bb.2-1996耐压圆形熔结玻璃与金届的瞄准Pressure resistant circular镜.第1部分:用 刑凹槽支架. 结构钢.工作温度-30C 和-60 Cglass-to-metal fused sight glasses - Part 1: For holders with recess;

16、design steel; operatingtemperatures - 30 0 C and - 60 0 CDIN EN 10025-1-2005结构钢制热轧产 品.第1部分：一 股交货技术条件Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004DIN EN 10025-2-2005结构钢制热轧产 品.第2部分:非 合金结构钢交货 技术条件Hot rolled products of structura

17、l steels - Part 2: Technical delivery conditions for non-alloy structural steels;German version EN 10025-2:2004DIN EN 10025-3-2005结构钢制热轧产 品.第3部分:正 火/正火轧制可 焊细粒结构钢交 货技术条件Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grai

18、n structural steels; Germanversion EN 10025-3:2004DIN EN 10025-4-2005结构钢制热轧产 品.第4部分:热 机械轧制可焊细 粒结构钢交货技 术条件Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels; Germanversion EN 10025-4:2004DIN EN 10025-5-200

19、5结构钢制热轧产 品.第5部分:改 良的耐大气腐蚀 的结构钢交货技 术条件Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance; German version EN 10025-5:2004DIN EN 10025-6-2005结构钢制热轧产 品.第6部分：在 淬火和回火条件 下高屈服强度结 构钢扁平轧材的 交货技术条件Hot rolled produ

20、cts of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition; German version EN 10025-6:2004DIN EN 10034-1994I型和H型结构 钢.形状和尺寸 公差Structural steel I and H sections; tolerances on shape and dimensions;

21、German version EN 10034:1993DIN EN 10056-1-1998结构钢制等边和 不等边角钢.第1 部分:尺寸Structural steel equal and unequal leg angles -Part 1: Dimensions;German version EN 10056-1:1998DIN EN 10210-1-2006非合金结构钢和 细晶结构钢热成 型空心型件.第1 部分:交货技术 要求Hot finished structural hollow sections of non-alloy and fine grain steels - Part

22、 1: Technical delivery conditions;English version of DIN EN 10210-1:2006-07DIN EN非合金和细晶粒Hot finished10210-2-2006结构钢的热精加 工空心结构型材.第2部分:公 差、尺寸和截面 特性structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties;English version of DIN EN 10210-2:2

23、006-07DIN EN 10219-2 Berichtigung 1-2007非合金结构钢和 细晶粒结构钢的 冷成形结构空心 型材.第2部分： 公差、尺寸和截 面特性.DIN EN 10219-2-2006 的 技Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10219-2:2006, Corrigenda to DIN EN

24、 10219-2:2006-07DIN EN 10219-2-2006非合金结构钢和 细晶粒结构钢的 冷成形结构空心 型材.第2部分： 公差、尺、J和分 段性能Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10219-2:2006-07DIN EN 10225-2002近海固定结构可 焊结构钢.技术 交货条件We

25、ldable structural steels for fixed offshore structures - Technical delivery conditions; German version EN 10225:2001DIN EN 10238-1996经自动喷涂和自动涂覆处理的结构钢产品Automatically blast-cleaned and automatically prefabrication primed structural steel products; German version EN 10238:1996DIN EN 10326-2004连续热浸涂覆结 构

26、钢带材和板 材.交货技术条 件Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions; German version EN 10326:2004编亏中文名称英文名称返回ISO 结构钢标准(ISO structural steel standards)ANSI | BS | DIN | EN | GB | ISO | JIS | NF |DIC编亏中文名称英文名称ISO 10799-2001结构钢冷成型、焊 接、中空结构截面技 术交货要求Structural

27、steels - Cold-formed, welded, structural hollow sections - Technical delivery requirementsISO 20723-2004结构钢.热轧型材的 表面状况.交货要求Structural steels - Surface condition of hot-rolled sections - Delivery requirementsISO 24314-2006结构钢.提局建筑物 抗震性结构钢.交货 技术条件Structural steels - Structural steels for building with

28、 improved seismic resistance - Technical delivery conditionsISO结构钢冷成型、焊Structural steels -4019-2001接、结构中空截面尺 寸和截面特性Cold-formed, welded, structural hollow sections - Dimensions and sectional propertiesISO 4952-2006改进的耐大气腐蚀性结构钢Structural steels with improved atmospheric corrosion resistanceISO 630 AMD

29、 1-2003结构钢.板材、宽扁 材、棒材、型材和异 型材.修改件1Structural steels - Plates, wide flats, bars, sections and profiles; Amendment 1ISO 630-1995结构钢板材、宽带 材、棒材、截面和剖 面Structural steels - Plates, wide flats, bars, sections and profilesISO 630-2-2000结构钢第2部分：热 精整空心型材的技术 交付要求Structural steels - Part 2: Technical delivery re

30、quirements for hot-finished hollow sectionsISO 7452-2002热轧结构钢板.尺寸 和形状公差Hot-rolled structural steel plates - Tolerances on dimensions and shape编亏中文名称英文名称美国结构钢标准（ANSI structuralsteel standards)ISO | JIS | NF |ANSI | BS | DIN | EN | GB |DIC编亏中文名称英文名称ANSI/AISC 341-2005结构钢建筑物的有关地震条款Seismic Provisions for

31、Structural Steel BuildingsANSI/AISC 341s1-2005对结构钢建筑物地震条款的补充件1Supplement No. 1 to the Seismic Provisions for Structural Steel BuildingsANSI/AISC360-2005结构钢建筑物的规范Specification for Structural Steel BuildingsANSI/ASTM A6/A 6M-2001滚轧结构钢棒、板、型钢和钢板桩一般要求规范Specification for General Requirements for Rolled St

32、ructural Steel Bars, Plates, Shapes, and Sheet PilingANSI/ASTMA673-1996结构钢冲击试验取样程序规范Specification forSampling Procedure for Impact Testing of Structural SteelANSI/ASTMA709/A 709M-2001桥梁用碳素 钢和高强度 低合金结构 型钢、钢板、 钢棒及调质 合金结构钢 棒规范Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes,

33、 Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for BridgesANSI/AWWAC223-2008结构钢和不锈钢开口管套Fabricated Steel and Stainless Steel Tapping SleevesANSI/SAEJ368-1993淬火和回火的高强度结构钢High Strength,Quenched, and TemperedStructural SteelsANSI/UL结构钢用保Standard for Rapid1709-2007护材料的快速升温燃烧试验用

34、标准Rise Fire Tests of Protection Materials for Structural Steel (Proposals dated 12-22-06)ASMEN45.2.5-1978核电厂建筑 阶段结构混 凝土，结构 钢,土质和地 基的安装，检 验以及测试 用附加质量 保讪要求(Supplementary quality assurance requirements for installation, inspection, and testing of structural concrete, structural steel, soils, and founda

35、tions during the construction phase of nuclear power p)ASTM A1031-2005热轧合金钢、拉制钢和结构钢薄板和带材、特厚卷材的标准规范StandardSpecification for Steel, Sheet and Strip, Heavy-ThicknessCoils, Alloy, Drawing Steel and Structural Steel, Hot-RolledASTM A502-2003结构钢钏钉标准规范Standard Specification for Rivets, Steel, StructuralAS

36、TM A586-2004a镀锌平行和 螺旋形结构 钢绞线的标 准规范StandardSpecification forZinc-Coated Parallel and Helical Steel WireStructural StrandASTMA603-1998(2003)镀锌结构钢绞线的标准规范StandardSpecification forZinc-Coated Steel Structural Wire RopeUL 1709-1994结构钢防护材料的快速(Rapid rise fire tests of protection升温燃烧试materials for验structural steel )