《密封性检测技术》PPT课件

《《密封性检测技术》PPT课件》由会员分享，可在线阅读，更多相关《《密封性检测技术》PPT课件（64页珍藏版）》请在装配图网上搜索。

1、2009.04.22 The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility mode

2、l or ornamental design registration. 安全客户满意度增加利润 The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event

3、of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rig

4、hts reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the p

5、ayment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders wil

6、l be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization i

7、s prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without

8、 expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its

9、contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as

10、 the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization o

11、f this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, dist

12、ribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design regis

13、tration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model

14、or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant o

15、f a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved i

16、n the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of dama

17、ges. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liab

18、le for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.O

19、ffenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed aut

20、horization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to ot

21、hers without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communica

22、tion of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this documen

23、t as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and u

24、tilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The c

25、opying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental

26、design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, ut

27、ility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of

28、 the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All right

29、s reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the pay

30、ment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. USON Tester The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Off

31、enders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed autho

32、rization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to othe

33、rs without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration.Filter Pressure Regulator Fill/VentValve EqualisationValve Diff.Transducer Pressure Tr

34、ansducer Test PortRef. Port The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a pat

35、ent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the e

36、vent of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. Al

37、l rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for

38、the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offender

39、s will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorizat

40、ion is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others wi

41、thout expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of

42、 its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as we

43、ll as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilizat

44、ion of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 1.密封圈没有弹性蠕变。

45、2.密封圈本身无泄漏。3.密封圈固定装置要正确承载密封圈。4.密封圈压紧时要保证充气空畅通。5.密封装置要易于接近、移动和安装。6.密封圈的硬度和强度要适度。7.给密封圈施加的压力要适度8.各个密封口的密封要做到同一性。9.被测工件的密封面要符合密封要求。 The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders w

46、ill be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization

47、 is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 树脂橡胶和聚亚安酯可以铸模或做成片状。和一般的氯丁橡胶相比它们都有很高的持久性和耐切削性。相对低压测试的应用一般选用硬度较软的材料。树脂橡胶是较软的材料之一，但缺点是易损。较高压力测试应用需采用较强硬度材料，来对应较高压力。 The co

48、pying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental d

49、esign registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, uti

50、lity model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of

51、the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights

52、 reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the paym

53、ent of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will b

54、e held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 最差的密封设计就是应用平板式密封垫做密封。因为它需要更大的力来压紧，并且箝位上平板式的密封垫会产生蠕变，进入被测部件引起被测容积变化或在夹具平台边缘因受力翘起而引起泄漏。 The copying, distribution and utilization of this document as we

55、ll as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 这个密封设计用了一个很厚的密封垫圈，没有嵌入夹具托盘。他减少了密封件的用料，

56、但对密封性并没有多大帮助。 The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility m

57、odel or ornamental design registration. O-型圈在加紧密封后陷入金属凹槽内。它可以实现金属对金属的对接。 The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All right

58、s reserved in the event of the grant of a patent, utility model or ornamental design registration. 垫圈密封和O-型圈密封有些相像, 但它提供了更多的密封面。可以用粘合剂把它固定在相应的位置。 The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohi

59、bited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 盘型密封不如垫圈密封。因为密封材料由于挤压会向内延伸阻塞充气孔。粘合剂或螺丝可起固定作用。 The copying, distribution and utilization of this document as well as the communic

60、ation of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 当充气孔的外表面没有经过机加工、凹凸不平时，推荐使用内插式密封。密封材料必须坚韧。 The copying, d

61、istribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design re

62、gistration. 内插式密封可以减小被测物体的容积，因此也可以和密封圈同时使用。 The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of th

63、e grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights r

64、eserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the paymen

65、t of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 针对密封用的汽缸的系列动作，其气路或水压系统的设计应该有独立的压力调解和控制装置。独立的压力调解可以保证系统密封性不受测试过程中辅助动作的影响。 The copying, distribution and utilization of this document as well as the communication of its contents t

66、o others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, ut