Matlab 各种随机数设置

《Matlab 各种随机数设置》由会员分享，可在线阅读，更多相关《Matlab 各种随机数设置（10页珍藏版）》请在装配图网上搜索。

1、Matlab各种随机数设置randn (伪随机正态分布数)Normally distributed pseudorandom numbersSyntaxr = randn(n)randn(m,n)randn(m,n)randn(m,n,p,.)randn(m,n,p,.)randn(size(A)r = randn(., double)r = randn(., single)Descriptionr = randn(n) returns an n-by-n matrix containing pseudorandom values drawn from the standard normal

2、distribution. randn(m,n) or randn(m,n) returns an m-by-n matrix. randn(m,n,p,.) or randn(m,n,p,.) returns an m-by-n-by-p-by-. array. randn returns a scalar. randn(size(A) returns an array the same size as A.r = randn(., double) or r = randn(., single) returns an array of normal values of the specifi

3、ed class.Note The size inputs m, n, p, . should be nonnegative integers. Negative integers are treated as 0.The sequence of numbers produced by randn is determined by the internal state of the uniform pseudorandom number generator that underlies rand, randi, and randn. randn uses one or more uniform

4、 values from that default stream to generate each normal value. Control the default stream using its properties and methods.Note In versions of MATLAB prior to 7.7 (R2008b), you controlled the internal state of the random number stream used by randn by calling randn directly with the seed or state k

5、eywords.ExamplesGenerate values from a normal distribution with mean 1 and standard deviation 2.r = 1 + 2.*randn(100,1);Generate values from a bivariate normal distribution with specified mean vector and covariance matrix.mu = 1 2;Sigma = 1 .5; .5 2; R = chol(Sigma);z = repmat(mu,100,1) + randn(100,

6、2)*R;Replace the default stream at MATLAB startup, using a stream whose seed is based on clock, so that randn will return different values in different MATLAB sessions. It is usually not desirable to do this more than once per MATLAB session.RandStream.setDefaultStream .(RandStream(mt19937ar,seed,su

7、m(100*clock);randn(1,5)Save the current state of the default stream, generate 5 values, restore the state, and repeat the sequence.defaultStream = RandStream.getDefaultStream;savedState = defaultStream.State;z1 = randn(1,5)defaultStream.State = savedState;z2 = randn(1,5) % contains exactly the same

8、values as z1Normrnd (随机正态分布数)Normal random numbersSyntaxR = normrnd(mu,sigma)R = normrnd(mu,sigma,m,n,.)R = normrnd(mu,sigma,m,n,.)DescriptionR = normrnd(mu,sigma) generates random numbers from the normal distribution with mean parameter mu and standard deviation parameter sigma. mu and sigma can be

9、 vectors, matrices, or multidimensional arrays that have the same size, which is also the size of R. A scalar input for mu or sigma is expanded to a constant array with the same dimensions as the other input.R = normrnd(mu,sigma,m,n,.) or R = normrnd(mu,sigma,m,n,.) generates an m-by-n-by-. array. T

10、he mu, sigma parameters can each be scalars or arrays of the same size as R.Examplesn1 = normrnd(1:6,1./(1:6)n1 =2.1650 2.3134 3.0250 4.0879 4.8607 6.2827n2 = normrnd(0,1,1 5)n2 =0.0591 1.7971 0.2641 0.8717 -1.4462n3 = normrnd(1 2 3;4 5 6,0.1,2,3)n3 =0.9299 1.9361 2.96404.1246 5.0577 5.9864randperm

11、(RandStream)(区域内的所有整数的随机分布)Random permutationrandperm(s,n)Descriptionrandperm(s,n) generates a random permutation of the integers from 1 to n. For example, randperm(s,6) might be 2 4 5 6 1 3. randperm(s,n) uses random values drawn from the random number stream s.betarnd (贝塔分布)贝塔分布是一个作为伯努利分布和二项式分布的共轭

12、先验分布的密度函数SyntaxR = betarnd(A,B)R = betarnd(A,B,m,n,.)R = betarnd(A,B,m,n,.)DescriptionR = betarnd(A,B) generates random numbers from the beta distribution with parameters specified by A and B. A and B can be vectors, matrices, or multidimensional arrays that have the same size, which is also the siz

13、e of R. A scalar input for A or B is expanded to a constant array with the same dimensions as the other input.R = betarnd(A,B,m,n,.) or R = betarnd(A,B,m,n,.) generates an m-by-n-by-. array containing random numbers from the beta distribution with parameters A and B. A and B can each be scalars or a

14、rrays of the same size as R.Examplesa = 1 1;2 2;b = 1 2;1 2;r = betarnd(a,b) r =0.6987 0.61390.9102 0.8067r = betarnd(10,10,1 5) r =0.5974 0.4777 0.5538 0.5465 0.6327r = betarnd(4,2,2,3) r =0.3943 0.6101 0.57680.5990 0.2760 0.5474Binornd (二项式分布)二项分布(binomial distribution)就是对这类只具有两种互斥结果的离散型随机事件的规 律性进

15、行描述的一种概率分布。SyntaxR = binornd(N,P)R = binornd(N,p,m,n,.)R = binornd(N,p,m,n,.)DescriptionR = binornd(N,P) generates random numbers from the binomial distribution with parameters specified by the number of trials, N, and probability of success for each trial, P . N and P can be vectors, matrices, or m

16、ultidimensional arrays that have the same size, which is also the size of R. A scalar input for N or P is expanded to a constant array with the same dimensions as the other input.R = binornd(N,P，m,n,.) or R = binornd(N,P，m,n,.) generates an m-by-n-by-. array containing random numbers from the binomi

17、al distribution with parameters N and P . N and P can each be scalars or arrays of the same size as R.AlgorithmThe binornd function uses the direct method using the definition of the binomial distribution as a sum of Bernoulli random variables.Examplesn = 10:10:60;r1 = binornd(n,1./n)r1 =210112r2 =

18、binornd(n,1./n,1 6)r2 =012131r3 = binornd(n,1./n,1,6)r3 =011103chi2rnd (卡方分布)若n个相互独立的随机变量&、& 2、& n，均服从标准正态分布，则这n个服从 标准正态分布的随机变量的平方和构成一新的随机变量，其分布规律称为X之分布SyntaxR = chi2rnd(V)R = chi2rnd(V,m,n,.)R = chi2rnd(V,m,n,.)DescriptionR = chi2rnd(V) generates random numbers from the chi-square distribution with

19、 degrees of freedom parameters specified by V. V can be a vector, a matrix, or a multidimensional array. R is the same size as V.R = chi2rnd(V,m,n,.) or R = chi2rnd(V,m,n,.) generates an m-by-n-by-. array containing random numbers from the chi-square distribution with degrees of freedom parameter V.

20、 V can be a scalar or an array of the same size as R.ExamplesNote that the first and third commands are the same, but are different from the second command.r = chi2rnd(1:6)r =0.0037 3.0377 7.8142 0.9021 3.2019 9.0729r = chi2rnd(6,1 6) r =6.5249 2.6226 12.2497 3.0388 6.3133 5.0388r = chi2rnd(1:6,1,6)

21、 r =0.7638 6.0955 0.8273 3.2506 1.5469 10.9197Copularnd (连接函数分布)Copula函数描述的是变量间的相关性，实际上是一类将联合分布函数与它们各自的边缘 分布函数连接在一起的函数SyntaxU = copularnd(Gaussian,rho,N)U = copularnd(t,rho,NU,N)U = copularnd(family,alpha,N)DescriptionU = copularnd(Gaussian,rho,N) returns N random vectors generated from a Gaussian c

22、opula with linear correlation parameters rho. If rho is a p-by-p correlation matrix, U is an n-by-p matrix. If rho is a scalar correlation coefficient, copularnd generates U from a bivariate Gaussian copula. Each column of U is a sample from a Uniform(0,1) marginal distribution.U = copularnd(t,rho,N

23、U,N) returns N random vectors generated from a t copula with linear correlation parameters rho and degrees of freedom NU. If rho is a p-by-p correlation matrix, U is an n-by-p matrix. If rho is a scalar correlation coefficient, copularnd generates U from a bivariate t copula. Each column of U is a s

24、ample from a Uniform(0,1) marginal distribution.U = copularnd(family,alpha,N) returns N random vectors generated from the bivariateArchimedean copula determined by family, with scalar parameter alpha. family is Clayton, Frank, or Gumbel. U is an n-by-2 matrix. Each column of U is a sample from a Uni

25、form(0,1) marginal distribution.ExamplesDetermine the linear correlation parameter corresponding to a bivariate Gaussian copula having a rank correlation of -0.5.tau = -0.5rho = copulaparam(gaussian,tau)rho =-0.7071% Generate dependent beta random values using that copulau = copularnd(gaussian,rho,1

26、00);b = betainv(u,2,2);% Verify that the sample has a rank correlation% approximately equal to tautau_sample = corr(b,type,kendall)tau_sample =1.0000-0.4537-0.45371.0000Gamrnd (伽马分布)伽玛分布(Gamma distribution)是统计学的一种连续概率函数。Gamma分布中的参数。， 称为形状参数(shape parameter)， (3称为尺度参数(scale parameter)0SyntaxR = gamrn

27、d(A,B)R = gamrnd(A,B,m,n,.)R = gamrnd(A,B,m,n,.)DescriptionR = gamrnd(A,B) generates random numbers from the gamma distribution with shape parameters in A and scale parameters in B. A and B can be vectors, matrices, or multidimensional arrays that all have the same size. A scalar input for A or B is

28、 expanded to a constant array with the same dimensions as the other input.R = gamrnd(A,B,m,n,.) or R = gamrnd(A,B,m,n,.) generates an m-by-n-by-. array containing random numbers from the gamma distribution with parameters A and B. A and B can each be scalars or arrays of the same size as R.Examplesn

29、1 = gamrnd(1:5,6:10)n1 =9.1132 12.8431 24.8025 38.5960 106.4164n2 = gamrnd(5,10,1 5)n2 =30.9486 33.5667 33.6837 55.2014 46.8265n3 = gamrnd(2:6,3,1,5)n3 =12.8715 11.3068 3.0982 15.6012 21.6739Frnd (F分布，两个卡方分布的自由度)F分布定义为：设X、Y为两个独立的随机变量，X服从自由度为k1的卡方分布，Y服从 自由度为k2的卡方分布，这2个独立的卡方分布被各自的自由度除以后的比率这一统计量 的分布。即：

30、上式F服从第一自由度为k1，第二自由度为k2的F分布SyntaxR = frnd(V1,V2)R = frnd(V1,V2,m,n,.)R = frnd(V1,V2,m,n,.)DescriptionR = frnd(V1,V2) generates random numbers from the F distribution with numerator degrees of freedom V1 and denominator degrees of freedom V2. V1 and V2 can be vectors, matrices, or multidimensional arr

31、ays that all have the same size. A scalar input for V1 or V2 is expanded to a constant array with the same dimensions as the other input.R = frnd(V1,V2,m,n,.) or R = frnd(V1,V2,m,n,.) generates an m-by-n-by-. array containing random numbers from the F distribution with parameters V1 and V2. V1 and V

32、2 can each be scalars or arrays of the same size as R.Examplesn1 = frnd(1:6,1:6)n1 =0.0022 0.3121 3.0528 0.3189 0.2715 0.9539n2 = frnd(2,2,2 3)n2 =0.3186 0.9727 3.02680.2052 148.5816 0.2191n3 = frnd(1 2 3;4 5 6,1,2,3)n3 =0.6233 0.2322 31.54582.5848 0.2121 4.4955Geornd(几何分布)几何分布是离散型概率分布。其中一种定义为：在n次伯努

33、利试验中，试验k次才得到第 一次成功的机率。详细的说，是：前k-1次皆失败，第k次成功的概率。SyntaxR = geornd(P)R = geornd(p,m,n,.)R = geornd(p,m,n,.)DescriptionR = geornd(P) generates geometric random numbers with probability parameter P . P can be a vector, a matrix, or a multidimensional array. The size of R is the size of P. The geometric d

34、istribution is useful when you want to model the number of successive failures preceding a success, where the probability of success in any given trial is the constant P. The parameters in P must lie in the interval 0 1.R = geornd(P，m,n,.) or R = geornd(P，m,n,.) generates an m-by-n-by-. array contai

35、ning random numbers from the geometric distribution with probability parameter P. P can be a scalar or an array of the same size as R.Examplesr1 = geornd(1 ./ 2.A(1:6)r1 =2 10252 60r2 = geornd(0.01,1 5)r2 =65 18 334 291 63r3 = geornd(0.5,1,6)r3 =071310Poissrnd (泊松分布)泊松分布适合于描述单位时间内随机事件发生的次数。泊松分布的期望和方

36、差均为4。SyntaxR = poissrnd(lambda)R = poissrnd(lambda,m,n,.)R = poissrnd(lambda,m,n,.)DescriptionR = poissrnd(lambda) generates random numbers from the Poisson distribution with mean parameter lambda. lambda can be a vector, a matrix, or a multidimensional array. The size of R is the size of lambda.R =

37、 poissrnd(lambda,m,n,.) or R = poissrnd(lambda,m,n,.) generates an m-by-n-by-. array.The lambda parameter can be a scalar or an array of the same size as R.ExamplesGenerate a random sample of 10 pseudo-observations from a Poisson distribution with A = 2. lambda = 2;random_sample1 = poissrnd(lambda,1

38、,10)random_sample1 =1012134200random_sample2 = poissrnd(lambda,1 10)random_sample2 =1115032234random_sample3 = poissrnd(lambda(ones(1,10)random_sample3 =3211004020random随机分布函数SyntaxY = random(name,A)Y = random(name,A,B)Y = random(name,A,B,C)Y = random(.,m,n,.)Y = random(.,m,n,.)DescriptionY = random

39、(name,A) where name is the name of a distribution that takes a single parameter, returns random numbers Y from the one-parameter family of distributions specified by name. Parameter values for the distribution are given in A.Y is the same size as A.Y = random(name,A,B) returns random numbers Y from

40、a two-parameter family of distributions. Parameter values for the distribution are given in A and B.If A and B are arrays, they must be the same size. If either A or B are scalars, they are expanded to constant matrices of the same size.Y = random(name,A,B,C) returns random numbers Y from a three-pa

41、rameter family of distributions. Parameter values for the distribution are given in A, B, and C.If A, B, and C are arrays, they must be the same size. If any of A, B, or C are scalars, they are expanded to constant matrices of the same size.Y = random(.,m,n,.) or Y = random(.,m,n,.) returns an m-by-

42、n-by. matrix of random numbers.If any of A, B, or C are arrays, then the specified dimensions must match the common dimensions of A, B, and C after any necessary scalar expansion.The following table denotes the acceptable strings for name, as well as the parameters for that distribution5Dirirfibutie

43、nInpiut Parameter AInput Parameter BInput PiarameterCor B己ba Di MrihutiuriAIor EiBoriolEinorTiiul 口2ibiLh_inm number of trialsp： probability of suaoess for each trifllcLil2 CT Cli3r匚hi-iqLi3左 口1夙11卜1_|4!0口ui degrees dF frteda mJ inp orJ ExpoLifriLti al*Exp口n己nHD is;tnbuEjQnjjz meanor *Exr4riE- V-aJ-

44、twpi location parametere scale p-arameteror Jr*F Distrj卜utiE】mL: numerator degree? of frssdamvE: diBn&minrtor degrees of fr-tftdcim，gan* or (rMtat-dDi*ibuticina: shape- parfimetcrt: xc-ale pArmeterf ecv or G-tnarcLLizbd Intrenie- V-ilneCiE IM 日 liZEdnW V ml u 世DhtHButiCinK： whapE pranieterj/i loc-st

45、ien p-ar am&ter; scale pdr-ameLeigp dr * ij-4nvir hl 3 x-d FL eijGeii已ip lized DistriLLjtiunk:til index (shape) parametercr: scale pjarfimeter尸 threshold location) par-smeteror G&wi砒rib弓日白止甘低口付灯山1曹r： probability parameterHYmgomEiTk 5 由SliHeM: ?izQ of the populationK: number of items 洞出 the d-tsired

46、chjsrjnctenstic in th芒 pop u IM onn? number of sfirnpks drawnXeh，Ol LeriDm-aL*Lc：口noriTHl OiEtribuij jiiPUubfnEinmi alDi$tdhutiEir： HumbsK oF suscessssp： prob-Hbility erf surass in a iingle triblncf OF Haarvu.LT 1 TINmosnb强 1 F DirtAhijticinwL: num e rator degrees of frsrdnmuGt denominiBtior degrees

47、 口F Fre-sdcm& noncemtnil rty pdarfimetErnet Ol JToac-D.tT41 t帼顷i匚己rltrl 1 口此什也110。11w; degrees of fieedom& noncenU- dlitp pmmwtBr* ddx2 or mTigDLtral ChLujuareOistribuijmv: dogrmos of fiesdcm& n心nwntr日lily pardmeternarm DF ILaTnslN erm j 1 Dkhib uti anjjz meanh tandrd deviidtianpmwE/ or18 Pc-ifiSEnP

48、cjn 口曜tnbijti口nX: mean1 rnyl Df K-iylai ch舀 Llh DiEtriBuHciriLt c-ale pa涕 m弓说ror T弓口t Di我Cr iL uTiijnv: dmgrMS of fisi&dorriuni f! QF Veil farmJUfiNcie Di$iriBution ( CearitiriiJijga： lower endpoint ( min imum)L： upper endpoiiM:( maximumJ unj d. or Bi g q t。Lhn f dtiiUnrfarm DiEtribi-rtinn (Diicree9

49、: maitimum Dbxeroble- valueKL Of Teituir阿阮| Di*rikuticii# Ecsle prdmstrshape parsmetarExamplesGenerate a 2-by-4 array of random values from the normal distribution with mean 0 and standard deviation 1:x1 = random(Normal,0,1,2,4)x1 =1.1650 0.0751 -0.6965 0.05910.6268 0.3516 1.6961 1.7971The order of the parameters is the same as for normrnd.Generate a single random value from Poisson distributions with rate parameters 1, 2, ., 6, respectively:x2 = random(Poisson,1:6,1,6)x2 =001257