干式厌氧生物转化

《干式厌氧生物转化》由会员分享，可在线阅读，更多相关《干式厌氧生物转化（15页珍藏版）》请在装配图网上搜索。

1、-Bio-energy recovery from high-solid organic substrates by dry anaerobic bio-conversion processes: a review通过干式厌氧生物转化过程从固体含量较高的有机基质中回收生物能源：综述SEVEN PARTS这篇论文主要分为七个局部1 Overview1概述2 Substrate characterization for D-AnBioC processes2 干式厌氧生物转化系统的底物特性3 Reactor configurations and operational sequences for

2、D-AnBioC processes3干式厌氧生物转化过程的反响器的配置和操作顺序4 Techniques to enhance the bio-energy recovery byD-AnBioC process 4 通过干式厌氧生物转化的过程来提高生物能源回收的技术5Factorsaffecting D-AnBioC efficiency 5干式厌氧生物转化效率的影响因素6 Digested residue management from D-AnBioC process6干式厌氧生物转化过程中消化剩余物的管理7 Energy and economic factors associated

3、with D-AnBioC process7 与干式厌氧生物转化过程相关的能源及经济因素8 Summary and future research directions8 总结及未来研究方向1 OverviewCurrently, anaerobic bio-conversion (AnBioC) of organic substrates (OS) is considered as the most mon biotechnological solution due to its economical and energy recovery benefits.目前，由于固体含量高的有机基质的

4、干厌氧生物转化在经济和能源回收方面的优势，使其成为了最常见的生物技术解决方案。In brief, OS are biochemically converted into bio-methane (CH4) under anaerobic conditions by the major groups of bacteria/archaea, such as hydrolyzers, acidogens, acetogens and methanogens.总之，在厌氧条件下，有机基质OS被一群主要为细菌/古生菌的菌群通过生化反响生成甲烷，主要的菌群如水解菌、产酸菌、产乙酸菌和产甲烷菌。2 Sub

5、strate characterization for D-AnBioC processes2 干式厌氧生物转化系统的底物特性The D-AnBioC system is mainly designed to treat OS from four different sources, including, agriculture waste, munity waste, animal waste and industrial waste.干式厌氧生物转化系统主要是设计处理四个不同来源的有机基质OS，包括农业废物、社区垃圾、动物废物和工业废物。Thus, TS of the OS substra

6、tes along with physicochemical properties of the substrates are to be mainly considered for the D-AnBioC process to control overall CH4 yield.因此，底物的有机基质OS中的总固体量连同底物的物理化学性质都被认为是干式厌氧生物转化过程中控制甲烷产生的主要因素。It was noted that the TS of OS influenced the following parameters: rheological properties and viscos

7、ity of the reactor contents, fluid dynamics, clogging and solid sedimentation that can directly affect the overall mass transfer rates within the bioreactors.于是得出，有机基质OS的总固体含量会影响以下几种参数：流变学特性和反响器内的物质的粘度，流体动力学，堵塞，固体沉降会直接影响整个生物反响器中的传质速率。However, the D-AnBioC systems seem to be more economical than W-An

8、BioC in treating OS because of the following: a smaller reactor volume, no internal mi*ing arrangement for continuous mi*ing (in some cases), can handle a variety of feed stocks, and can attain ma*imum CH4 yield.然而，在处理有机基质OS上，干式厌氧生物转化系统比湿式厌氧生物转化系统更经济，原因如下：它的反响器容积更小，内部没有用于连续混合的混合装置在*些情况下，能够处理各种各样的原料，

9、能够获得最大的甲烷产量。3 Reactor configurations and operationalsequences for D-AnBioC processes3干式厌氧生物转化过程的反响器的配置和操作顺序A number of mercial plants, pilot plants and proto-type bio-reactors to treat OS have been developed using the D-AnBioC processes. Four major considerations with the bio-reactor design for cont

10、inuous operations include:很多商业性质的处理厂，中试处理厂和原生物反响器在处理有机基质OS上已经开场开发利用干式厌氧生物转化过程。四个连续运行的生物反响器的设计考虑的主要因素包括：Organic Loading Rate (OLR)1有机负荷率OLR有机负荷率OLR是测量厌氧系统的生物转化能力的一种方法。Solid/Digestate Retention Time (SRT)2固体/沼渣的保存时间SRTSRT是在单位时间内流入的体积和有机基质OS流出的体积比。是固体停留在消化池中的平均停留时间。Hydraulic Retention Time (HRT)3水利停留时间

11、HRT CH4 Yield4甲烷产量甲烷产量最大化是最重要的生物反响器设计参数，并且在操作运行的条件中起着关键的作用。3.1 Microbial dynamics and metabolite distribution with respect to bio-reactor design3.1微生物动力学和代谢产物的分布与生物反响器设计In general, four major classified groups of microorganisms are involved in the bioconversion of OS into CH4, as depicted in Fig. 3.

12、一般情况下，四大类的微生物参与生物将有机基质OS转化成甲烷，如图3所示。It has been reported that the hydrolysis/acidogenesis microorganisms have a faster growth rate (30 min) resulting in more than 90 % in total digester population during the initial stages. 有关报道说明，水解/酸化作用使微生物的增长速度更快30分钟，从而导致在初始阶段产生的沼气比例大于90。As a first step in the An

13、BioC process, hydrolysis/acidogenesis of ple* organic substrates produce VFAs, amino acids, alcohol, carbon dio*ide (gas phase) and hydrogen (gas and liquid phase) within the system. Among the different acids produced, acetic acid will be more abundant than other acids like formic, propionic, valeri

14、c and butyric acids. Due to the accumulation of these organic acids, the system pH and ORP values will be 4.5 0.5 and 50 mV (Eh), respectively (Gerardi 2003).作为干式厌氧生物转化过程的第一步，水解/酸化过程的有机底物在系统中产生复杂的物质如挥发性脂肪酸，氨基酸，醇，二氧化碳气相和氢气气相和液相。在不同的酸产生过程中，乙酸会比其他酸，如甲酸，丙酸，戊酸和丁酸更加丰富。由于这些有机酸的积累，该系统的pH和氧化复原电位ORP分别为 4.5 0.

15、5和 50mVEhGerard,2003。In the second step, that is, the acidogenesis/ acetogenesis process, products like acetate, hydrogen and less amounts of CH4 are formed under a pH range of 3.56.0 and ORP -170 50 mV (Eh) (Gerardi 2003). Homoacetogen, a special group of bacteria, involved in the utilization of H2

16、 and CO2 during this stage, produces acetate via the Wood-Ljungdahl pathway. 在第二步骤中，也就是酸化/产乙酸过程，产物如乙酸盐，氢和少量的CH4，形成的pH值范围为3.5-6.0和氧化复原电位(ORP)为-170 50mVEhGerard,2003。同型产乙酸菌是一群特殊的细菌，在这个阶段中涉及H2和CO2的利用率，通过Wood-Ljungdahl途径产生醋酸。Also, acetogensis of propionic and butyric acids proceed under very low H2 part

17、ial pressure/ concentrations during the third stage (that is, acetogenesis) of anaerobic conversion. 同时，丙酸及丁酸的产酸菌产酸是在H2 分压/浓度非常低的情况下进展的，发生在厌氧转换期间的第三阶段 即，产酸。Followed by acetogenesis, acetoclastic methanogens which utilize acetate as a carbon source (Eq. 5), hydrogenotrophic methanogens which utilize

18、hydrogen and carbon-dio*ide (Eq. 6), and methylotrophic methanogens which utilize methyl alcohol (Eq. 7) produce CH4 during the last step.随后，通过产乙酸菌，产甲烷菌使用醋酸酯作为碳源Eq.5，产氢产甲烷菌利用氢气和二氧化碳Eq.6，甲醇产甲烷菌利用甲醇Eq.7在最后一步产生甲烷。4 Techniques to enhance the bio-energy recovery by D-AnBioC process4 通过干式厌氧生物转化的过程来提高生物能源回

19、收的技术There are a number of techniques proposed in the literature to improve the bio-energy recovery from OS under D-AnBioC processes. Generally, all these techniques were used either alone or in binations for the better performance of the bioreactor. The details are discussed below.有很多文献中提出提高有机基质OS的干

20、式厌氧生物转化过程回收生物能源的技术。一般来说，所有这些技术单独使用或在生物反响器中结合使用以到达更好的性能。在下面进展详细地讨论。4.1Temperature4.1 温度Temperature is one technique to improve the efficiency of the system and reduce the overall SRT in D-AnBioC processes.温度在干式厌氧生物转化过程可以提高系统效率、减少整体的固体/沼渣的停留时间。Thermophilic temperatures convert organic acids at a faste

21、r rate, with higher CH4 production (2535 %) than the mesophilic system.高温系统比中温系统转换有机酸的速度更快，CH4的产量也更高25-35。Net energy gain of more than 5075 % was reported with the thermophilic D-AnBioC system (Zeshan et al. 2021).Zeshan等人在2021年曾报道在适温的干式厌氧生物转化系统中，净能量的收益超过50-75%。4.2Pre-treatment of substrates4.2 底物的预

22、处理Generally, pre-treatment technologies were adopted to alter or remove these structural/positional impediments to increase the yields of fermentable simple sugars/intended products in order to further process utilizations (Mosier et al. 2005).一般来说，预处理技术是通过改变或移除一些构造/成分障碍，增加可发酵单糖的产量/预期的产物，以进一步提高利用率的过

23、程Mosier等人，2005。Specifically, any pretreatment technology is intended to: 预处理技术的目的：(1) free as much carbohydrates as possible into monomers; 1使尽可能多的碳水化物尽可能转化成单体；(2) provide easy accessibility for bacterial or enzymatic action; 2提供容易操作的细菌/酶促作用；(3) minimize sugar degradation and lignin solubilization;3

24、减少糖降解和木质素的溶解； (4) be environmentally friendly and a less energy intensive process; 4成为环境友好型和低能量密集型的过程；and (5) be a scalable, simple and robust system.5是一个可伸缩，简单的和强有力的系统。 Particle size affects the overall bioconversion efficiency and determines the digestate quality. Therefore, size reduction is an i

25、mportant pretreatment technique for D-AnBioC processes (Forster-Carneiro et al. 2021b; Guendouz et al.2021; Nizami and Murphy 2021; Zeshan et al. 2021) to obtain a uniform particulate size. This can improve the active surface area for faster enzymatic reactions. 但是采用干式厌氧生物转化系统处理有机基质OS时，粒子大小是一个重要的因素。

26、粒子大小会影响整个生物的转化效率，并且决定消化的质量。因此，粉碎是干式厌氧生物转化过程中的一个重要的预处理技术，以获得尺寸均匀的颗粒Forster-Carneiro等人，2021b；Guendouz等人，2021；Nizami和Murphy，2021；Zeshan等人，2021。这可以提高颗粒活性的外表积，使酶促反响更快。The alkaline pre-treatment technique is most monly reported.报道最多的是碱性预处理过程。Thermal and acid pretreatment methods are less e*plored with OS,

27、 especially for use in the D-AnBioC processes.用热和酸的预处理方法处理有机基质OS的研究较少，特别是干式厌氧生物转化的过程。Whereas, the biological pre-treatment of OS for the D-AnBioC process is less attempted due to major factors like: 然而，在干式厌氧生物转化过程中，用生物法对有机基质OS进展预处理的尝试较少，其主要因素有：(1) a longer retention time pared to physicochemical met

28、hods; 1生物法与物理化学方法相比需要的保存时间更长；(2) the need to provide adequate environmental conditions; 2生物法需要提供充分的环境条件；and (3) its cost effectiveness.3生物法的本钱效益。4.3 Co-digestion4.3 共消化 The use of mono-substrate for D-AnBioC processes sometimes affect the overall process conversion due to nutrient limitations. 在干式厌氧

29、生物转化过程中的采用纯培养基，由于营养条件的限制，有时会影响整个过程的转换。It would require treatment to provide an e*ternal nutrient supply throughout operations.这需要在整个过程中提供外部营养。The various mi*ing ratios of OS for co-digestion studies were considered more important and were e*pected to affect the overall microbial munity distribution

30、within the system.Liu等人在2021年也报道了不同有机基质OS的共消化比率可以提高消化动力学，但不能提高沼气潜力。Co-digestion of OS has important benefits, such as:用共消化的方法处理有机基质OS有非常重要的优势，比方： (1) reduced fugitive gas emissions; 1减少挥发性气体的排放；(2) ability to manipulate the C/N ratio to improve process stability; 2控制C / N的能力，以提高工艺的稳定性；(3)providing a

31、 balanced buffering capacity; 3提供平衡的缓冲能力；(4) improved the rheological properties within the system; 4改良的系统内的流变性能；(5) reduced e*ternal nutrient supply; 5减少外部养分的供给；(6) minimized the effe cts of to*ic or inhibitory pounds towards microbial munity within the systems;6使毒性效应影响最小化或抑制化合物对系统内的微生物群落的影响； (7) i

32、mproved the nutrient quality of the digested residue for land applications; 7为土地的利用，改善消化剩余土地的营养质量；and (8) improved biogas yield.(8) 提高的沼气产量。4.4 Digester mi*ing and leachate e*change practices4.4 沼气池混合渗滤液交换的方法Due to the high-solid content within the digester, there is a chance for black pockets, or d

33、ead zone formations, during continuous operation under the D-AnBioC process. 在干式厌氧生物转化连续运行中，由于消化池内的固体含量高，容易形成黑口袋或死区。That is, the overall bioconversion process will be affected should there be aminimum biogas yield. 也就是说，整体的生物转化过程将受到影响，使产气量降到最低。This will result in digester failure.这将导致消化池出现故障。 To avo

34、id such consequences, internal mi*ing arrangements, or even, the recirculation of digested residue, should be practiced. 为了防止这样的后果，内部应进展混合安排，甚至使消化残渣进展再循环。The use of mi*ing arrangements使用混合安排的优点：: (1) provides a homogenized environment; 1提供了一个同质化的环境；(2) prevents stratification and formation of surfac

35、e crust;2防止分层和外表地壳的形成； (3) improves contact between microbes and biodegradable particles; 3 增大了微生物和可生物降解的颗粒之间接触面积；(4) helps to release gas bubbles trapped inside air pockets;4有助于释放气穴里的气泡； (5) improves the diffusivity co-efficient of moisture (free water) and other nutrients; 5提高了水分游离水和其他营养物质的扩散率；(6)

36、 supports the growth of active microorganisms;6支持有效微生物的生长； and (7) re-suspends heavier particles 7使较重的粒子再次悬浮起来(Buendia et al. 2021; Jha et al. 2021; Ghanimeh et al. 2021).In addition, providing mi*ing arrangements also affects the overall net energy gains and reduces biogas production from the D-AnB

37、ioC processes.此外，混合安排也影响了整体的净能量收益，并减少了干式厌氧生物转化的过程中沼气的产生.4.5 Inoculum and enzyme addition4.5 接种物和酶促反响A major problem with the D-AnBioC process is that it requires a larger amount of inoculum for better biogas yield especially for batch operations. 干式厌氧生物转化过程中的一个主要问题是，它需要较大的接种量才能得到更好的沼气产率，尤其是对于批处理操作系统

38、。Inoculum generally contains a mi*ed population of bacteria and archaea originally obtained from the previous batch of digestion. 接种量一般包含一个混合菌群和最初从前几批消化过程中获得的古细菌。This bacterial population from the previous batch is called adapted culture. 这种从上一批处理中获得细菌群体的方法被称为适应培养。But, the best used inoculum is repo

39、rted as anaerobically digested sewage sludge from wastewater treatment plants (Forster- Carneiro et al. 2007b).但是，据报道，最好的接种方法是污水处理厂中污水污泥的厌氧消化.Other than sewage sludge,digested material from an established reactor or ruminant cultures or manure is often used as seed inocula.除了污水污泥，还有已建立的反响器的消化物，反刍物或粪

40、便经常被用来作为菌种的接种物。4.6 Altering the feedstock and OLR4.6改变原料和有机负荷率OLR Varying the OLR to the bioreactors can be done to improve biogas yield.生物反响器的有机负荷率的变化可以改善沼气产量。Also, it is possible to get an inoculum which is stable within the system, that is, an inoculum which is able to withstand adverse environme

41、ntal conditions. 此外，在系统内可还以得到一个的稳定的接种物，即能够承受恶劣的环境条件的接种物。Similarly, lower OLR could be used for the bioreactor system under lower biogas yield conditions. This is also done to avoid short circuiting (Zeshanet al. 2021).同样，在生物反响器系统的沼气产量低的条件下，可以采用低的有机负荷率。这样做也是为了防止出现短路的情况Zeshan等，2021.4.7 Neutralization

42、techniques4.7中和技术 The single-stage D-AnBioC process requires initial neutralization to support the growth of methanogenic populations and to reduce time at the start-up phase.单级的干式厌氧生物转化过程开场需要中和作用来维持产甲烷菌的生长以及降低启动阶段的停留时间。In that case, the addition ofalkali to increase the pH to near neutral can reduc

43、e thetime required to start the methanogenesis processwithin the system, as reported by Zeshan et al. (2021).在2021年Zeshan等人曾报道，既然那样，通过参加碱来提高pH值使其接近中性，可以减少启动系统内的产生甲烷所需要的时间。Chen et al. (2021) reported that the alkalinity of about 2,500 mg CaCO3/L and a pH of above 7 is maintained by adding 0.2 g NaOH/

44、g VS for effective CH4 conversion. Chen等人2021报告说，为了使CH4进展有效的转化，需要约2500mg碳酸钙/ L的碱度和7以上的pH值，这可以通过参加0.2gNaOH /gVS来维持。因此，在干式厌氧生物转化过程中添加碱性溶液以中和该系统，能够快速的产生甲烷。Therefore, the addition of an alkaline solution to neutralize the system can be used for the quick onset of methanogenesis process during D-A-BioC p

45、rocesses.4.8 Nutrient supplement4.8 补充营养Micro elements like iron, cobalt, nickel, tungsten, molybdenum, and selenium were reported to be important co-factors of enzyme or co-enzymes involved in the biosynthesis of CH4 and the growth of anaerobic bacteria. 据报道，在生物合成CH4和厌氧细菌的生长中，铁，钴，镍，钨，钼，硒等微量元素是重要的酶或

46、酶的辅因子 Nges等，2021。While operating the system, particularly under high ammonia- N concentration, the addition of micronutrients supported process stability.在操作系统中，特别是在氨氮浓度很高时，添加微量营养素能够提高过程的稳定性。5 Factors affecting D-AnBioC efficiency5干式厌氧生物转化效率的影响因素The D-AnBioC processes frequently encounter inhibition

47、 problems which are harder to control (Guendouz et al. 2021). 干式厌氧生物转化过程经常遇到难以控制的抑制问题The main inhibiting pounds are VFAs, ammonia-N, metals and cations 主要的抑制化合物的挥发性脂肪酸VFAs，氨氮，金属阳离子，.In addition, the accumulation of gases such as CO2, H2 and H2S also affect the overall process performance.此外，如CO2，H2和

48、H2S气体的积累也会影响整体的工艺性能。5.1 Volatile fatty acids (VFAs)5.1挥发性脂肪酸VFAsVFAs are important intermediate pounds in the metabolic pathway of CH4 fermentation. 挥发性脂肪酸VFAs是CH4发酵代谢途径中的重要的中间体化合物。VFAs cause microbial stress particularly at very high concentrations.挥发性脂肪酸VFAs会导致微生物的压力，特别是浓度非常高时。Acetic, butyric and

49、propionic acids are the major VFAs present during anaerobic bio-degradation.乙酸，丁酸和丙酸是厌氧生物降解中的主要的挥发性脂肪酸VFAs的表现形式。5.2 Ammonia-N5.2氨态氮About 6080 % of total nitrogen (especially the proteins and other organic nitrogen pounds) was converted (via continuous solubilization and ammonification process) to am

50、monia-N during the anaerobic digestion of OS.Ammonia-N tended toaccumulate in the system. 在有机基质的好氧消化过程中60%-80%的总氮尤其是蛋白质和其他有机氮化合物的转化为氨态氮通过连续增溶和氨化过程。Ammonia-N tended toaccumulate in the system.氨态氮在系统中更倾向于不断积累。It is generally believed that the ammonia-N at *200 mg/L is essential for the growth of anaer

51、obic microorganisms. 一般认为，200mg/l浓度的氨态氮是厌氧微生物生活所必需的。However, the threshold value at 1,500 mg/L e*hibited moderate inhibition, while, a threshold value at more than 3,000 mg/L was e*pected to inhibit 100 % of methanogenesis process via different mechanisms.然而，Gerardi于2003年表示，在限值浓度为1500mg/l时，产甲烷作用会受到一

52、定的抑制，当限值浓度为3000mg/l以上时，不同机制下的产甲烷作用会被完全抑制。Similarly, free ammonia (non-ionic form) concentration of about 300800 mg/L was reported to be inhibitory for the D-AnBioC processes .相似的，据报道(Gallert和 Winter 1997; Yabu 等人2021; Duan 等人2021)，浓度为300800 mg/l的游离态氨对干式厌氧生物转化过程有抑制作用。5.3 Metal ions5.3金属离子Metal ions l

53、ike sodium, potassium and calcium are required for the effective functioning of D-AnBioC systems.在干式厌氧生物转化系统的有效运转中，像钠、钾、钙这样的金属离子是必不可少的。 E*cessive concentration causes strong inhibition.但浓度过量将会引起强烈的抑制作用。Liang et al. (2021) reported no significant effect of elevated concentrations of major ions like p

54、otassium, sodium and calcium accumulation with CH4 production. 2021年，Liang等人研究指出，随着甲烷的产生，像钾、钠、钙这样的主要离子的浓度并没有明显的升高。However, thermophilic acetoclastic methanogens are reported to be more sensitive with potassium ions.然而，据报道，产乙酸的高温厌氧甲烷菌对钾离子浓度更敏感。6 Digested residue management from D-AnBioCprocess6干式厌氧生物

55、转化过程中消化剩余物的管理Generally, the three major process ponents involved with digestate management schemes include:一般认为，消化剩余物管理的三个主要方案包括： (1) dewatering and drying; 1脱水和枯燥；(2) aerobic treatment;2好氧处理； and (3) pre- and postcharacterization of digested residue for application purposes, as discussed below.3下面讨

56、论的将是对以应用为目的的消化剩余物预期和后期的特性分析.6.1 Dewatering and drying6.1 脱水和枯燥 Mechanical dewatering is monly used for the digested residue to remove water contents thus improving TS content for easy handling. 机械脱水是消化剩余物去除水分最常用的方式，它能提高剩余物中的总固体含量，使处理更加方便。Methods like centrifugation, press filters, screw pumping and

57、vacuum evaporation methods are used alternatively.像离心，压滤，泵吸和真空蒸发这些方法都是选择性的使用。一般认为，这些技术简单，省时，更有效，但是经济性不是太好。6.2 Aerobic curing or posting6.2 有氧固化及堆肥Aerobic curing generally breaks down organic ponents further and fi*es nitrogen contents.有氧固化一般来说就是进一步分解有机化合物组分和修复氮的含量。It also eliminates hazardous ponent

58、s and reduces pathogen/ helminthes loads.它还能消除有害物质，降低病原体/寄生虫的数目。6.3 Pre and post-characterization of residue for soil fertilization6.3 用于土壤施肥残渣的前期与后期的特性分析There are a number of parameters generally considered for post materials and needed for the characterization of digested residue from D-AnBioC pro

59、cesses.堆肥材料有大量的参数需要考虑，有些就是通过对干式厌氧生物转化过程中消化剩余物的特性分析所得。 These include: temperature, C/N ratio, NPK (Nitrogen-Phosphorous-Potassium) value, biogas potential, SOUR, cation e*change capacity (CEC), heavy metals, seed germination inde* (SGI) and pathogen loads.这些参数包括：温度、C/N、氮磷钾NPK值、沼气潜在值、比耗氧率SOUR、阳离子交换容量C

60、EC、重金属量、种子发芽指数SGI及病原体数目。7 Energy and economic factors associatedwith D-AnBioC process7 与干式厌氧生物转化过程相关的能源及经济因素Net energy gain from the D-AnBioC system is always reported to be higher than that of W-AnBioC systems.据报道，从干式厌氧生物转化系统中获得的净能量比从湿式厌氧生物转化系统中获得的较高。Energy balance is generally calculated from the

61、overall CH4 yield and total in-house energy consumption for various plant operation activities, such as, bioreactor operations, pre-treatment of OS, and postmanagement of digested residues. 能量的平衡一般是根据处理厂各种操作过程中甲烷总产量及内部能量消耗来进展计算的，例如，生物反响器的操作，有机基质OS的预处理，消化剩余物的后期管理。Waste collection and transportation c

62、osts are usually e*cluded.废物收集和运输本钱通常被排除在外。8 Summary and future research directions8 总结及未来研究方向Bio-energy production from OS is considered as a clean bio-fuel production technology to replace fossil fuels, coal or oil in the future.来自有机基质OS的生物能源产品是未来取代化石燃料煤或石油的一种清洁的生物燃料产品。Also, it contributes toovera

63、ll GHG emission mitigation via resource conservation,recycling and reuse practices.同时，通过节约资源、循环和回收利用的方法，有助于减少温室气体总量的排放。Many potentialOS, like agricultural residues, sludge, biomass,organic fraction of municipal solid wastes, foodwaste, animal manures and fleshing, papers/cardboards,industrial organi

64、c byproducts, sea grass andaquatic weeds, are being e*plored for bio-energyrecovery.许多潜在的有机基质OS正在探索着应用于生物能源，比方，农业废物，污泥，生物质，城市生活垃圾中的有机质局部，食品废物，动物粪便和尸体，纸/纸板，工业有机副产品，海草和水生杂草。Therefore, the selection of appropriate pre-treatment conditions and optimization of process parameters for different OS was deem

65、ed important.因此，适宜的预处理的选择和不同有机基质OS操作参数的最优化是非常重要的。It has been proven that the size reduction and alkaline pre-treatment methods of OS is more advantageous over the other monly proposed methods, especially for D-AnBioC systems. 实践证明，有机基质OS尺寸减小及碱性预处理的方法比其他常规处理方法有更大的优势，尤其在干式厌氧生物转化系统中。In addition, the bioreactor configuration and