科技查新报告-文献检索作业

上传人:小** 文档编号:65010573 上传时间:2022-03-22 格式:DOC 页数:11 大小:283.50KB
收藏 版权申诉 举报 下载
科技查新报告-文献检索作业_第1页
第1页 / 共11页
科技查新报告-文献检索作业_第2页
第2页 / 共11页
科技查新报告-文献检索作业_第3页
第3页 / 共11页
资源描述:

《科技查新报告-文献检索作业》由会员分享,可在线阅读,更多相关《科技查新报告-文献检索作业(11页珍藏版)》请在装配图网上搜索。

1、科 技 查 新 报 告项目名称:生物质还原制备贵金属纳米颗粒委 托 人: 委托日期: 查新机构(盖章): 查新完成日期:2012年12月 15 日中 华 人 民 共 和 国 科 学 技 术 部二年制查新项目名 称中文:生物质还原制备贵金属纳米材料英文:Biosynthesis of Noble Metal Nanomaterials查新单位名 称通信地址邮政编码361005负 责 人电 话传 真联 系 人电 话电子信箱一、查新目的1、查新类型:立项查新、成果查新、奖励申报、新产品鉴定、专利查新 2、查新范围:国内外、国内、国外 二、查新项目的科学技术要点 贵金属纳米材料在光学、电学、声学、磁学

2、、催化和力学等性质上与传统的贵金属材料有很大差异,其在制药、有机合成、石油化工的领域发挥着重要作用。本项目利用生物体或生物质还原法制备贵金属纳米颗粒,探究不同生物体或生物质制备贵金属纳米颗粒的性质、特点及其制备条件,通过对制备出的贵金属纳米颗粒进一步的实验测试与分析,探讨制备贵金属纳米颗粒的优良方法,为生物法还原制备贵金属纳米颗粒产业化奠定基础。三、查新点与查新要求查新点:寻找制备贵金属纳米颗粒的优良生物体或生物质,研究不同生物还原方法得到的贵金属纳米颗粒的特性, 并结合实验结果及验证过程, 提出控制贵金属纳米材料形貌和颗粒粒度的机理及工艺条件,从而找到制备不同用途贵金属纳米颗粒的优良方法。查

3、新要求:希望查新机构通过查新,证明在所查范围内有无相同研究。希望查新机构通过查新,证明在所查范围内有无达到该产品的效果指标参数。四、文献检索范围及检索策略1. 中国学位论文数据库2. 中文科技期刊数据库3. CA Plus4. Web of science5. Engineering Index 中文检索词:纳米 贵金属 生物 还原英文检索词:biosynthesis nanoparticle noble metal五、检索结果在中国期刊网中用高级检索(检索条件为主题)检索词为“纳米、贵金属、生物、还原”检索到了5篇,列出3篇如下1【题名】贵金属纳米材料生物还原制备技术的研究进展【作者】郑炳云

4、;黄加乐;孙道华;贾立山;李清彪【期刊】厦门大学学报(自然科学版), 2011, 50(2), 378 386【摘要】综述了国内外利用生物还原技术制备贵金属纳米材料及贵金属催化剂的研究进展, 并展望了该研究领域的发展方向。2【题名】贵金属纳米颗粒及其催化剂的生物还原制备技术【作者】孙道华;李清彪;贾立山;何宁;黄加乐;王惠璇;杨欣【期刊】现代化工,2009, 29(2), 3235【中文摘要】利用自行筛选的具有强还原能力的菌株制备得到银纳米颗粒, 所得颗粒的粒径基本在10 nm以下, 主要集中在28nm。将生物还原过程进一步引入催化剂制备过程, 得到负载型银催化剂和负载型钯催化剂, 并将催化剂

5、分别应用于1,2-丙二醇空气氧化合成丙酮醛、CO氧化生产CO2以及蒽醌加氢反应中。3【题名】丝素蛋白质原位还原制备纳米贵金属胶体及表征【作者】陈文兴;吴雯;陈海相;沈之荃【期刊】中国科学(B辑 化学), 2003, 33(3), 185191【摘要】室温下,不加任何还原剂, 丝素蛋白质溶液可以原位还原贵金属前驱体制备纳米贵金属胶体, 用光谱法研究了还原反应机理以及pH和反应物摩尔比对反应的影响, 用FT-IR, TEM, AFM对所得溶胶结构作了表征。TEM照片显示丝素-金溶胶为新颖核-亮纳米结构的生物级合物(bioconjugate), 丝素-银溶胶为十几个核-壳型结构的丝素-银纳米颗粒聚集

6、成的簇状物。金溶胶具有高度的分散性和稳定性,而银溶胶相对而言较差。在中国学位论文数据库中用高级检索(检索条件为主题), 检索词为纳米、贵金属、生物、还原, 检索到了99篇, 列出2篇如下:1【中文题名】银纳米材料和金纳米材料的植物生物质还原制备及应用初探【作者】黄家乐 【学位授予单位】厦门大学 【导师】李清彪【论文级别】博士 【学科专业名称】工业催化 【学位年度】2009【中文摘要】贵金属纳米材料因其具有独特的催化和光学性能而得到广泛重视,其制备与应用已成为当今纳米技术领域中的一个研究热点。相对于传统的物理法和化学法,近年来出现的基于微生物或植物的生物还原法,具有成本低、绿色环保、纳米材料稳定

7、性高等优点,成为贵金属纳米材料具有发展前景的新颖制备方法。在原材料方面,相比微生物繁琐的筛选与培养过程,植物及其提取液的获得和使用更加简便,得到了一定的关注。然而,目前有关植物及其提取液制备贵金属纳米材料的研究更多地集中在简单的条件实验和纳米材料的表征等,很多重要的基础问题还远未搞清楚,例如:贵金属纳米材料形貌和颗粒粒度的控制仍较为有限,植物及其提取液的工艺路线和还原反应器,以及还原工艺条件的优化均未见报道。这些基础问题的解决对于建立一种贵金属纳米材料形貌和粒度调控的新方法,以及建立实际可行的植物生物还原制备工艺过程与关键技术具有极为重要的意义。基于以上研究现状,本工作旨在利用植物干粉及其提取

8、液来还原Ag+或AuCl4-获得相应的银和金纳米材料。通过对植物干粉的筛选,以及植物还原过程的工艺路线的优化和还原反应器的设计,建立了一套可调控银和金纳米材料的形貌及颗粒粒度的新方法,并初步探索了银纳米颗粒的抗菌应用和金纳米颗粒的催化应用。首先,本工作利用了芳樟叶干粉还原制备了银纳米颗粒和金纳米颗粒,并在芳樟叶提取液还原体系中引入纳米晶种,以调控纳米颗粒的形貌和粒度。通过改变芳樟叶干粉的用量,可以调控获得粒度在55-80 nm之间的近球形银纳米颗粒、边长在25-150 mm和厚度约为7 nm的三角金纳米片以及粒度在10-35 nm之间的近球形金纳米颗粒。在芳樟叶提取液还原Ag+体系中引入适量的

9、银纳米晶种,促进了银纳米颗粒各向异性生长,而在芳樟叶提取液还原AuCl4-体系中引入适量的金纳米晶种,反应快速产生的金原子在金晶种上的快速累积,促进了金纳米颗粒各向同性生长。芳樟叶干粉的初步成分分析和红外光谱分析结果表明,多糖、还原糖、黄酮等多羟基化合物的羟基对Ag+和AuCl4-起还原作用。其次,本工作采用来源广泛而极易获得的中草药植物干粉,在30的条件下对银纳米颗粒和金纳米颗粒的形貌进行可控制备,并研究植物干粉还原制备银纳米颗粒和金纳米颗粒过程的共性规律。利用红花、菊花、淫羊藿、夏枯草、金钱草等五种植物干粉可用于制备近球形银纳米颗粒;栀子和金银花可用于制备单晶银纳米线,银纳米线的平均直径约

10、为45 nm,长度可达10m以上,银纳米线是由近球形银纳米颗粒串接并沿110方向生长的。金银花和厚朴花可用于制备银纳米片,银纳米片是由粒度较小的近球形银纳米颗粒逐渐转化而来的,纳米片重叠生长,易于形成树枝状银晶体。基于植物干粉红外光谱计算所得的各向异性生长指数(S)可作为植物干粉筛选的参考依据之一,S10的植物干粉可促进银纳米材料各向异性生长,而S10的植物干粉可促进银纳米材料的各向同性生长。植物干粉在还原制备金纳米颗粒方面是普遍适用的,利用不同的植物干粉来还原HAuCl4,可获得不同粒度分布的球形金纳米颗粒和三角金纳米片,研究还发现雏形的“纳米片”是由许多10 nm以下的近球形金纳米颗粒团聚

11、形成的。再次,研究了植物提取液还原连续制备银纳米颗粒工艺,并考察了主要工艺参数对纳米颗粒形貌和粒度的影响规律。管式微反应器适宜的加热温度为90,在该温度下,可以将银晶核的形成过程与银纳米颗粒的生长过程分开,不存在二次成核,因此能够获得粒度分布较窄的银纳米颗粒;原料液经过预热处理有利于获得粒度分布较窄的银纳米颗粒。三通的适宜夹角为60或90。获得粒度分布较窄的银纳米颗粒的适宜进料体积流率为05 mLmin-1或08 mLmin-1;在相同的进料体积流率下,反应管内径越小,流体温度越均匀,银晶核成核速度越快,所得的银纳米颗粒粒度分布也越窄,反应管的适宜内径为2 mm或3 mm。最后,通过液体培养基

12、法和固体培养基法评价了银纳米颗粒对金黄色葡萄球菌和大肠杆菌的抗菌性能;采用了侧柏叶提取液还原制备了AuTiO2催化剂,并以4-硝基酚(4-NP)向4-氨基酚(4-AP)的催化转化反应作为模型反应,对所得的AuTiO2催化剂进行催化性能评价。采用侧柏叶提取液快速制备的银纳米颗粒对大肠杆菌的最小抑菌浓度(MIC)和最小杀菌浓度(MBC)分别为14 ppm和27 ppm,而银纳米颗粒对金黄色葡萄球菌的MIC为54 ppm。侧柏叶干粉所制得的金纳米颗粒较稳定,且对4-NP的催化转化反应有较好的催化活性。利用侧柏叶提取液制备的AuTiO2催化剂对4-NP的催化转化反应有较好的催化活性;在30下制备的Au

13、TiO2催化剂的催化性能优于60和90下制备的催化剂;经过300焙烧处理之后的AuTiO2催化剂的催化性能较未焙烧的催化剂好。2【中文题名】贵金属纳米材料的绿色制备与表征 【作者】朱清 【学位授予单位】扬州大学 【导师】沈明【论文级别】硕士 【学科专业名称】物理化学 【学位年度】2009【中文摘要】本论文将植物提取物中的小分子化合物(鞣酸、没食子酸和表没食子儿茶素没食子酸酯)应用于合成贵金属纳米材料, 通过改变源自植物的环境友好型试剂的用量、贵金属前体以及温度等实验参数,结合微波辐射、普通加热等实验手段,绿色合成出金、银、铂以及金/铂双金属等纳米材料, 并利用UV-vis、TEM、XRD和FT

14、-IR等测试手段对所得样品进行了表征。概括起来,本文的主要研究内容包括: 1.在室温下利用鞣酸(TA)既做保护剂又做还原剂制备了金、银纳米粒子。随着TA/HAuCl4摩尔比的增加,紫外可见光谱显示出金溶胶的max明显增大且吸收带变宽,其最大吸光率逐渐减小。TEM观察显示, 增加鞣酸的用量会导致金纳米粒子间花状纳米聚集体的形成。实验发现阳离子表面活性剂CTAB对鞣酸保护的金纳米聚集体具有强烈的解聚集作用,常温及剧烈搅拌的条件下能够使得花状形貌的聚集体转变为形貌均一的球形金纳米粒子。在摩尔比TA/HAuCl4相对较大时,提高反应温度可以削弱金纳米粒子的聚集程度。而预先向反应体系中加入CTAB能明显

15、抑制鞣酸生物合成制备金纳米粒子的反应, 采用种子生长法则能顺利制备形貌丰富的、各向异性的金纳米粒子。若在不加入碱的条件下, 采用种子生长法可成功实现鞣酸对银盐的还原,并可获得包括单晶银纳米线在内的多形貌银纳米结构。2.在常温下用没食子酸(GA)还原氯金酸制备了没食子酸包裹的金纳米颗粒。随着GA/HAuCl4摩尔比的增加,金溶胶的紫外可见吸收峰位置发生明显红移,而金溶胶的稳定性则逐渐下降。TEM观察显示, 随着GA/HAuCl4摩尔比增加, 金纳米颗粒不仅尺寸增加,而且形貌也从球形、多边形逐渐向形成似花形的球状聚集体变化。电泳实验表明没食子酸保护的金纳米聚集体带负电, CTAB对金纳米聚集体具有

16、强烈的解聚集作用, 升高温度可加速解聚集过程,而采用微波辐射方法则可在数十秒内实现快速解聚作用。阴离子表面活性剂SDS的加入会明显降低没食子酸稳定的金溶胶的稳定性, 而PVP则可提高金纳米聚集体在体系中的稳定性。3.利用表没食子儿茶素没食子酸酯(EGCG)还原氯金酸可成功获得EGCG稳定的金溶胶。结果表明, 随着EGCG/HAuCl4摩尔比的增加, 金纳米粒子的表面等离子共振吸收的max先增加后减小,而在EGCG/HAuCl4摩尔比为3.5:1时出现最大值, 体系中金纳米粒子的形貌从分散性较好的球形逐渐向形成柱形、线形、花形及似球形的金纳米聚集体变化。固定EGCG/HAuCl4摩尔比为3.5:

17、1, 所得金纳米粒子的尺寸随着温度的升高而减小, 且粒子间的聚集倾向减弱。微波辐射能够促进CTAB对EGCG包裹的金纳米聚集体的解聚集作用。外加电解质亦会影响EGCG稳定的金溶胶的稳定性, 尤其是酸和钙离子的加入能明显导致EGCG包裹的金粒子聚集。研究表明, EGCG还原并保护的金纳米粒子对硼氢化钠还原对硝基苯酚形成对氨基苯酚的反应具有明显的催化作用。4.在沸腾状态下用EGCG还原不同HAuCl4/H2PtCl6摩尔比的混合前体,随着HAuCl4/H2PtCl6摩尔比的减小, 金纳米粒子吸收峰逐渐消失或被覆盖, 而铂纳米粒子的吸收越发明显, TEM照片则显示生成的金/铂双金属纳米粒子实现了从似

18、花状到似球状的形貌变化。实验结果表明, 同时还原法得到的纳米聚集体是由先生成的金纳米粒子引发或起种子作用, 使EGCG顺利还原氯铂酸所获得的金核铂壳类型(AuPt)的双金属纳米材料。种子生长法实验显示,在适当温度下金种子可引发EGCG慢还原H2PtCl6并在金种子表面生成金属铂粒子, 随着Au种/H2PtCl6摩尔比的减小, 种子生长法所获得的AuPt双金属纳米结构尺寸和铂壳层的厚度增加,粒子的形貌则呈现规律性的变化。在Web of Science数据库中,检索条件为标题,关键词为nano* 和 biosyhthe*,检索到了228篇,列出被引用频次较高的2篇如下: 1Title: Extra

19、cellular biosynthesis of silver nanoparticles using the fungus Fusarium oxysporumAuthor(s): Ahmad, A (Ahmad, A); Mukherjee, P (Mukherjee, P); Senapati, S (Senapati, S); Mandal, D (Mandal, D); Khan, MI (Khan, MI); Kumar, R (Kumar, R); Sastry, M (Sastry, M)Source: COLLOIDS AND SURFACES B-BIOINTERFACES

20、 Volume: 28 Issue: 4 Pages: 313-318 Abstract: The development of reliable, eco-friendly processes for the synthesis of nanomaterials is an important aspect of nanotechnology today. One approach that shows immense potential is based on the biosynthesis of nanoparticles using biological micro-organism

21、s such as bacteria. In this laboratory, we have concentrated on the use of fungi in the intracellular production of metal nanoparticles. As part of our investigation, we have observed that aqueous silver ions when exposed to the fungus Fusarium oxysporum are reduced in solution, thereby leading to t

22、he formation of an extremely stable silver hydrosol. The silver nanoparticles are in the range of 5-15 nm in dimensions and are stabilized in solution by proteins secreted by the fungus. It is believed that the reduction of the metal ions occurs by an enzymatic process, thus creating the possibility

23、 of developing a rational, fungal-based method for the synthesis of nanomaterials over a range of chemical compositions, which is currently not possible by other microbe-based methods. 2Title: Biosynthesis of silver and gold nanoparticles by novel sundried Cinnamomum camphora leafAuthor(s): Huang, J

24、L (Huang, Jiale); Li, QB (Li, Qingbiao); Sun, DH (Sun, Daohua); Lu, YH (Lu, Yinghua); Su, YB (Su, Yuanbo); Yang, X (Yang, Xin); Wang, HX (Wang, Huixuan); Wang, YP (Wang, Yuanpeng); Shao, WY (Shao, Wenyao); He, N (He, Ning); Hong, JQ (Hong, Jinqing); Chen, CX (Chen, Cuixue)Source: NANOTECHNOLOGY Volu

25、me: 18 Issue: 10 Abstract: The synthesis of nanocrystals is in the limelight in modern nanotechnology. Biosynthesis of nanoparticles by plant extracts is currently under exploitation. Not only could silver nanoparticles ranging from 55 to 80 nm in size be fabricated, but also triangular or spherical

26、 shaped gold nanoparticles could be easily modulated by reacting the novel sundried biomass of Cinnamomum camphora leaf with aqueous silver or gold precursors at ambient temperature. The marked difference of shape control between gold and silver nanoparticles was attributed to the comparative advant

27、age of protective biomolecules and reductive biomolecules. The polyol components and the water-soluble heterocyclic components were mainly responsible for the reduction of silver ions or chloroaurate ions and the stabilization of the nanoparticles, respectively. The sundried leaf in this work was ve

28、ry suitable for simple synthesis of nanoparticles.c在Engineering Index数据库中, 用检索式(nanopartic* wn TI) and (biosynthe* wn TI), 检索到了168篇, 先列出3篇如下: 1Title: Biosynthesis of controllable size and shape gold nanoparticles by black seed (Nigella Sativa) extractAuthors: Fragoon, Ahmed; Li, Jianjun; Zhu, Jian;

29、Zhao, Junwu Source: J. Nanosci. Nanotechnol Volume: 12 Issue: 3 Pages: 2337-2345Abstract: We report on the use of black seed (Nigella sativa) extract, previously not exploited, in synthesis of gold nanoparticles. On treating aqueous chloroauric acid solution with black seed extract, the antioxidant

30、activities critical roles of the various phytochemicals is observed leading to the formation of crystalline and poly shaped gold nanoparticles. In this research work, we developed a rapid and non-toxic method for the preparation of biocompatible gold nanoparticles by two different synthetic routes:

31、microwave irradiation and thermo-induced procedures. The nanoparticles were characterized and investigated by ultraviolet-visible (UV-Vis) spectrophotometry, transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, and X-ray diffraction (XRD).The size and shape of the nano

32、particles were found to be very sensitive to the quantity of the extract. As the amount of extract is increased, the stronger the interaction between the extract biomolecules and nascent nanoparticles, thus the yield of nanoparticles increased as shown by surface plasmon resonance bands in the UV-vi

33、s-NIR spectra. The reaction temperature has a significant role in production of gold nanoparticles with different shapes. The XRD studies reflect an interesting feature indicates that gold nanocrystals are highly anisotropic in nature, mainly triangular and hexagonal shapes, and that the particles a

34、re (111) oriented. The observed characteristics suggest the application of the biocompatible gold nanoparticles to future in vivo imaging and therapy. 2Title: Sargassum myriocystum mediated biosynthesis of gold nanoparticles Authors: Stalin Dhas, T.; Ganesh Kumar, V. ; Stanley Abraham, L.; Karthick,

35、 V.; Govindaraju, K. Source: Spectrochim. Acta Part A Mol. Biomol. Spectrosc Volume: 99 Pages: 97-101Abstract: Functionalized metal nanoparticles are unique in nature and are being developed for its specificity in drug targeting. In the present study, aqueous extract of Sargassum myriocystum is used

36、 for the biosynthesis of gold nanoparticles (AuNPs) by the reduction of chloroauric acid. The formation of nanoparticles reaction was complete within 15 min at 76 C. The size, shape and elemental analysis of AuNPs were carried out using UV-visible absorption spectroscopy, FT-IR, TEM, SEM-EDAX, and X

37、RD analysis. The newly formed AuNPs are stable, well-defined, polydispersed (triangular and spherical) and crystalline with an average size of 15 nm. The biomolecule involved in stabilizing AuNPs was identified using GC-MS. 3Title: Biosynthesis of Nanoparticles by Microorganisms and Their Applicatio

38、nsAuthors: Xiangqian Li, Huizhong Xu, ZheSheng Chen, and Guofang ChenSource: Journal of Nanomaterials Volume 2011, Article ID 270974, 16 pagesAbstract: The development of eco-friendly technologies in material synthesis is of considerable importance to expand their biologicalapplications. Nowadays, a

39、 variety of inorganic nanoparticles with well-defined chemical composition, size, and morphology have been synthesized by using different microorganisms, and their applications in many cutting-edge technological areas have been explored. This paper highlights the recent developments of the biosynthe

40、sis of inorganic nanoparticles including metallic nanoparticles, oxide nanoparticles, sulfide nanoparticles, and other typical nanoparticles. Different formation mechanisms of these nanoparticles will be discussed as well. The conditions to control the size/shape and stability of particles are summa

41、rized. The applications of these biosynthesized nanoparticles in a wide spectrum of potential areas are presented including targeted drug delivery, cancer treatment, gene therapy and DNA analysis, antibacterial agents, biosensors, enhancing reaction rates, separation science, and magnetic resonance

42、imaging (MRI). The current limitations and future prospects for the synthesis of inorganic nanoparticles by microorganisms are discussed.在SciFinder Scholar数据库中用“biosynthesis noble metal nanoparticles”检索到了7篇, 用“biosynthesis of noble metal nanoparticles”检索到了5篇, 列出2篇如下1 Title: Biosynthesis of noble met

43、al nanoparticles by diatoms and their catalytic and antimicrobial propertiesAuthors: Schrofel, Adam; Shor, Leslie MSource: Abstracts of Papers, 244th ACS National Meeting&Exposition, Philadelphia, PA, United States, August 19-23, 2012 (2012), ENVR-357. Abstract: Novel synthesis of gold and silver ba

44、sed bionanocomposites by biol. driven processes employing two diatom strains (Navicula atomus, Diadesmis gallica) is introduced. Fabricated bionanocomposite was successfully modified to form magnetically responsible material.Figure 1 . SEM micrographs of biosynthesized nanoparticles and magnetically

45、 modified samples. Gold nanoparticles are attached on the surface of diatom cells, but can be often also inside the pore (a). Diatom frustules veiled into the ferrofluid (b, c). Detail of gold nanoparticles mixed with ferrofluid (d). Catalytic activity has been proved by the redn. of 4-nitrophenol i

46、n presence of NaBH4. Bionanocomposite also exhibits the ability to inhibit bacterial growth. Disk diffusion test and minimal inhibition concn. assessment were performed for more detailed description of biocomposite antibacterial properties. Microfluidic device for continuous prodn. of biosynthesized

47、 nanoparticles and catalysis application testing was designed.2Title: Biosynthesis of metal nanoparticles using fungi and ActinomycetesAuthors: Sastry, Murali; Ahmad, Absar; Khan, M. Islam; Kumar, Rajiv Source: Current Science (2003), 85(2), 162-170Abstract: A review. There is little doubt that nano

48、materials will play a key role in many technologies of the future. One key aspect of nanotechnol. concerns the development of reliable exptl. protocols for the synthesis of nanomaterials over a range of chem. compns., sizes and high monodispersity. In the context of the current drive to develop gree

49、n technologies in materials synthesis, this aspect of nanotechnol. assumes considerable importance. An attractive possibility is to use microorganisms in the synthesis of nanoparticles. Here, the authors provide a brief overview of the research efforts worldwide on the use of microorganisms in the b

50、iosynthesis of inorg. nanoparticles, with particular emphasis on the recent results obtained at the National Chem. Lab., Pune on the biosynthesis of noble-metal nanoparticles using fungi and Actinomycetes. 六、查新结论 共检索出相关文献507篇,经筛选出主要相关文献12篇。通过对相关文献的综合分析、比较,可以得到以下结论:中文已见采用不同生物体或生物质制备贵金属纳米颗粒,并通过实验验证分析贵

51、金属纳米颗粒特性及其制备方法研究的文献报道,如孙道华等,利用自行筛选的具有强还原能力的菌株制备得到银纳米颗粒,并将生物还原过程进一步引入催化剂制备过程,把得到的催化剂加入相关反应,研究颗粒特性及其制备方法。如陈文兴等,采用丝素蛋白质溶液原位还原贵金属前驱体制备纳米贵金属胶体, 并用光谱法研究了还原反应机理以及pH和反应物摩尔比对反应的影响,通过进一步测试得到了该方法制备金、银纳米胶体的差异。如黄加乐,采用不同植物提取液制备贵金属纳米颗粒,测试了不同植物对贵金属纳米颗粒特性的影响,并通过将用不同过程制备的贵金属纳米颗粒引入催化剂制备及其他化学过程,探究制备的工艺条件。英文文献中也有上述相关报道,

52、如Ahmad等,利用尖芽孢镰刀菌还原制备银纳米溶胶,并讨论了基于真菌的制备贵金属纳米颗粒方法的应用。如Stalin Dhas等,采用马尾藻合成金纳米颗粒。对贵金属纳米颗粒形状与大小因素的研究在所查文献中仅有一篇报道。如Fragoon等,采用黑种草提取液还原制备金纳米颗粒,他们利用紫外可见分光光度计,透射电镜,能量散射X射线光谱仪,X射线衍射仪跟踪金纳米颗粒的合成,通过调整参与反应的黑种草提取液的用量来观测对金纳米颗粒形状及大小的影响,通过观测得出金纳米颗粒的形状与大小对于黑种草提取液用量的变化十分敏感。另外,他们还研究发现,温度为不同形状金纳米的产量有十分显著的影响。综上所述,对于生物质还原制备贵金属纳米颗粒的研究,国内外大多还是在利用不同生物质合成纳米颗粒的初期阶段。而查新点中提到的,对于贵金属纳米材料形貌和颗粒粒度的控制机理及条件的研究及工艺流程优化,涉及的非常少。 查新员(签字): 查新员职称: 审核员(签字): 审核员职称: (科技查新专用章) 2012年12 月 日附件:在Engineering Index数据库中, 用检索式(nanopartic* wn TI) and (biosynthe* wn TI), 检索到了168篇,在第72篇文章中找到这篇综述论文,第一页截图如下11第 页

展开阅读全文
温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 装配图网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

copyright@ 2023-2025  zhuangpeitu.com 装配图网版权所有   联系电话:18123376007

备案号:ICP2024067431-1 川公网安备51140202000466号


本站为文档C2C交易模式,即用户上传的文档直接被用户下载,本站只是中间服务平台,本站所有文档下载所得的收益归上传人(含作者)所有。装配图网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。若文档所含内容侵犯了您的版权或隐私,请立即通知装配图网,我们立即给予删除!