《安装施工管理》PPT课件.ppt

《《安装施工管理》PPT课件.ppt》由会员分享，可在线阅读，更多相关《《安装施工管理》PPT课件.ppt（14页珍藏版）》请在装配图网上搜索。

1、安装工程施工管理 construction management of installation project 凯盛汽车发动机制造（张家口）有限公司 Kaisheng Automobile Powertrain Manufacturing(ZJK) Com,Ltd Company Logo 2012.07.29 主要内容 main contents 资料管理 document management 安全管理 safety management 成本控制 cost management 进度管理 progress management 质量管理 quality management Compa

2、ny Logo 2012.07.29 一 质量管理 quality management 材料的质量管理 Quality management of materials 质量管理 quality management 施工过程的质量 管理 Construction procedure of quality management Company Logo 2012.07.29 一 质量管理 quality management 材料要执行样品制，材料进场前两周由 施工单位提供材料的样品，经监理、甲 方验收合格并封样后，方可大批进场； The contractor should provide m

3、aterial sample before materials come into the site 2weeks in advance. Material can deliver to the site after the material acceptance is qualified and the sample is sealed by client and supervisor. 材料进场要有监理、施工单位人员在场， 并由施工单位提供本批次质材料的量合 格证，检测报告。 The contractor should provide certification of the materi

4、al and test report. The supervisor and contractor should be in place during material coming. 材料的质量管理 Quality management of materials Company Logo 2012.07.29 一 质量管理 quality management 提供项目施工组织方案，每项分部工程提供专项施工 方案。 Provide project construction schedule and branch project construction schedule. 实行样板制，分部工

5、程必须先做样板，施工单位自检 合格后，经监理、业主检查合格方可大面积施工。 The contractor should provide sample before construction. The contractor can start construction of large area after the check by contractor, supervisor and client is qualified. 施工过程的质量 控制 Quality control of construction procedure 隐蔽工程必须进行检测，涉及到要求闭水试验及水压 试验的，要求进行

6、完试验后方可隐蔽。 The concealed work must be tested. It is necessary to do water test and water pressure test. The work can be concealed after the test is qualified. 分部分项工程的验收 Acceptance of branch project Company Logo 2012.07.29 一 质量管理 quality management 材料样品展台 platform for material sample 网架球节点样品 （气体保护焊） F

7、ramework ball joint sample (gas protection welding ) 现场手工焊 （经探伤检测） Manual welding on site (pass detection test) Company Logo 2012.07.29 一 质量管理 quality management 地坪样板 concrete floor sample 施工缝传力 杆连接筋 dowel bar in construction joint 地坪施工前制作样板 making sample before construction 制作样品后进行技术交流 technical co

8、ordination after sample is completed 总结施工不足处 summary shortcomings during construction 针对理论结合实际情况进行 工艺改进 provide process improvement measurements linking theory with practice 地坪施工前样板 Concrete floor sample before construction Company Logo 2012.07.29 二 进度管理 progress management 提供施工总进度计划 ，根据总进度计划及 现场情况，

9、报月计划 、双周计划 Provide general construction schedule, and also report monthly plan and double-week plan based on general progress schedule and site condition. 进度管理 progress management 每周实行监理例会制度， 要求项目经理或项目执行 经理、技术负责人、安全 员、质检员必须到会 Organize supervision meeting every week and it is requested that project m

10、anager/ executive project manager, technical leader, safety personnel and QC technician must attend the meeting. Company Logo 2012.07.29 三 成本控制 cost control 静态成本控制 static cost control 成本控制 cost control 动态成本控制 Dynamic cost control 每月 10日前提报上 月的变更签证量， 如过期不报，按照 无变更签证量考虑 The supervisor should report cha

11、nge before every 10th. If not so ,it will be considered as no changes. 每月 25日前由施工单位提交当月完成工 程量，由监理及甲方工程师确认后，按 照合同约定付款 The contractor should report monthly completed work amount before every 25th and the client will pay the progress money based on the contract after the supervisor and client confirm.

12、Company Logo 2012.07.29 四 安全管理 safety msnagement 1 安全组织机构 、安全设备、 安全管理人员 的准备 Prepare safety council, safety equipment and safety management personnel. 2 进场施工前双 方签订安全文 明施工协议 Safe and civilized construction agreement should be signed by both parties. 3 进场施工前双 方签订安全管 理条例 Safety management regulations sh

13、ould be signed by both parties before construction. 4 施工前的安全 培训 Organize safety training before construction. Company Logo 2012.07.29 五 资料管理 document control 施工单位需要提 交的资料 Documents the contractor should provide 资料管理 document control 项目资料管理 Project document management Company Logo 2012.07.29 五 资料管理 d

14、ocument management 1 提供施工组织 设计，每项分 部工程提供专 项施工方案 Provide construction organization plan and branch construction plan. 2 提供总平面布置 图，包括临建、 临时加工区域等， 得到业主同意方 可建设 Provide general layout plan including temp buildings and fabrication areas. The construction can start after the client agrees. 3 提供排污排 废措施计划 Pr

15、ovide measurem ent plan for waste disposal. 4 人员组织机构， 要求项目经理、 项目执行经理、 技术负责人、安 全员、质检员不 离现场 It is requested PM, EPM, technical leader, safety personnel and QC technician cannot leave the site. 施工单位需要提交的资料 documents the contractor should provide 5 二次深化设 计图纸 Second deeper design of drawings. Company Logo 2012.07.29 五 资料管理 document management 按照甲方提供的 资料管理表格进 行提报 Report the documents according to templates the client provides. 项目资料管理 project document management 及时提报相关资 料，要求过程资 料与工程同步 Report the documents in time and make documents synchronize with actual progress.