电镀工艺表面处理

《电镀工艺表面处理》由会员分享，可在线阅读，更多相关《电镀工艺表面处理（6页珍藏版）》请在装配图网上搜索。

1、表面处理Surface finishing 1、热浸锌：Hot-dip galvanizing概述：热浸锌是将除锈后的钢构件浸入 600 C左右高温融化的锌液中，使钢 构件表面附着锌层，锌层厚度对 5mm以下薄板不得小于65pm，对厚板不 小于86pm。从而起到防腐蚀的目的。definition:Hot-dip galvanizing is a form of galvanization. It is the process of coating steel parts with a thin Zinc layer, by passing the metal through a molten

2、bath of zinc at a temperature of around 600 C. When the thickness of sheet metal is below 5mm, the Zinc layer must be above 65pm; and the Zinc layer should be above 86pm for those thick plates. After the process, it can improvethe corrision resistance and tarnish resitence of the products.优点：耐久年限长，生

3、产工业化程度高，质量稳定。因而被大量用于受大气 腐蚀较严重且不易维修的室外钢结构中。如大量输电塔、通讯塔等。Advantages: After hot-dip galvanizing, the products are more durable, the manufacturing process is highly industrialized and the quality is very stable.And so, it is widely applied in the outdoor steel structures which are facing serious atmosphe

4、ric corrosion and inconvenient maintenance, such as the power transmission towers and communications towers, etc.2、达克罗（DACROMET）：Dacromet:概述：达克罗是 DACROMET 译音和缩写，简称达克罗、达克锈、迪克龙。 国内命名为锌铬涂层 Zinc cr coating ，是一种新型的耐腐涂层与传统的电镀 锌相比：锌铬涂层耐腐蚀性能极强，是镀锌的710 倍，无氢脆性，特别适用于高强度受力件，高耐热性、耐热温度300C,尤其适用于汽车、摩托车发动机部件的高强度构件，

5、高渗透性、高附着性、高减磨性、高耐气候 性、高耐化学品稳定性、无污染性。Decromet is new coating with excellent decay resistance named by zinc-chromium coating in China. Compared with the traditional electrogalvanizing coatings, zinc-chromium coating have a very good performance of corrosion resistance and tarnish resistance, about 710

6、 times better than Zinc coating. It is without hydrogen embrittlement. Its specially applied in high-strength forced components; it is heat-durability and the heat-resistant temperature was 300C, specially suitable to the high-strength components in engine of automabile and motorcycle; it is with hi

7、gh penetrability and , adhesion or wettability, wear resistance, electrical stability and polluti on-free。优点：(1)无污染和公害；(2)高耐热性；(3)超强的耐蚀性能；(4)良好的渗透性;(5)无氢脆性；(6)结合力及再涂性能好。Advantages:(1), pollution-free; (2), heat-durability; (3), corrosion resistance and tarnish resistance; (4), high penetrability;(5)

8、 No hydrogen embrittlement; (6) good adhesion and overcoatability.3、耐落： Nylok 概述：耐落螺纹防松技术是以特殊技术使特殊的工程树脂永久粘附在螺纹 上，利用工程树脂材料的反弹性，使螺纹在锁紧过程中通过挤压达到对震 动及冲击的绝对阻力，彻底解决了螺纹的松动问题。Nylok thread anti loosening Technology adopts special technologies to make the engineering plastics clinging to thread permanently. B

9、y using the elasticity of the engineering plastics, it will make the threads squeeze in the interlock process to cause ABSOLUTE resistence of vibration and shock, and solve the problem of thread loosing for ever.优点：彻底解决了螺纹的松动问题。Advantages:Solved the problem of thread lossing foreve.3、 钝化： passivatio

10、n 概述：钝化是使金属表面转化为不易被氧化的状态，而延缓金属的腐蚀速度的方 法。Passivation is the process of making a material passive, usually by the deposition of a layer of oxide that adheres to the metal surface. It can retard the progress of metal corrosion.优点：经济实用，同时添加了高效缓蚀剂、抑雾剂，防止金属出现过腐蚀和 氢脆现象、抑制酸雾的产生。Advantages:Itesconomical and

11、practical; meanwhile, it has been added Acid Fog Inhibitor and corrosion inhibitor, which can prevent the corrosion and hydrogen embrittlement; inhibit the production of Acid fog.4、 磷化： phosphorization 概述：把工件浸入磷酸盐溶液中，使工件表面获得一层不溶于水的磷酸盐薄膜 的工艺。Phosphorization is the process of coating components with a

12、 phosphate layer which is lacking affinity for water by passing the components through a bath of phosphat solution.作用：（1）提高工件的耐磨性；（2）令工件在机加工过程中具有润滑性； （3） 提高工件的耐蚀性。（1）， Improve the wear resistance performance; （2）, make the components causing lubricating property during manufacturing process; （3）, En

13、hance the corrosion resistance performance.6、发蓝： blueing 概述：发蓝是将钢在空气中加热或直接浸於浓氧化性溶液中，使其表面产生极薄 的氧化物膜的材料保护技术，也称发黑。Bluing is the process of coating steel components with a ultra-thin electrochemical conversion coating by heating the steel in air or through a bath of strong oxidizing solution, also calle

14、d darkening.优点：单独的发蓝膜抗腐蚀性较差，但经涂油涂蜡或涂清漆后，抗蚀性和抗摩擦 性都有所改善。发蓝时，工件的尺寸和光洁度对质量影响不大。故常用於精密仪 器、光学仪器、工具、硬度块等。Advantages:The single bluing coating is not with a very good performance of corrosion resistance and tarnish resistance. However, after covered with oil, wax or varnish, the performance of corrosion re

15、sistance and wear resistance is getting better. Duirng the process of bluing, the size and surface smoothness of the metal sheets effects the quality very little, and so, it is ofter applied to fine instruments, optics equipment, tools, hardness blocks, etc.7、机械渗锌： Sherardising概述：将渗锌剂与钢铁制件，共置于渗炉中，加热

16、到400 C士，活性锌原子则由钢铁制件的表面向内部渗透，同时铁原子则由内向外扩散，在制件表 层形成了一个均匀的锌 铁化合物即渗锌层。SherardisingIt is a process by heating the objects in an airtight container with zinc powder by 400 C士. The Activated Zinc Atom will permeate into Steel or Iron body; meanwhile, the Iron Atoms will permeate from the inside of the part

17、s to the outside; and it will form an even Zinc-Iron compound, just the Sherardized coating.优点：（1）耐蚀性特强；（2）耐磨性优异；（3）粉末渗锌基本上无污染；（4） 渗锌产品还可以与涂料结合形成复合防护层； （5）经过渗锌的钢铁制件其 机械性能不会有大的变化。Advantages:（1）, good corrosion resistance and tarnish resistance; （2）, good wear resistance; （3）, pollution-free; （4）, the

18、 Sherardised components can compound with the paints to become composite coating; （5）, after Sherardising, the mechanical property of the components changes very little.8、镀镍： Nickel Plating 概述：通过电解或化学方法在金属或某些非金属上金上一层镍的方法， 称为 镀镍。镀镍分电镀镍和化学镀镍。Nickel electroplating is a process of depositing nickel on a

19、 metal or nonmetallic components via a electrolytic or chemical methods. Nickel Plating incudes Nickel electroplating and chemical nickel-plating.优点：（1）电镀镍层在空气中的稳定性很高，由于金属镍具有很强的钝化能 力，在表面能迅速生成一层极薄的钝化膜，能抵抗大气、 碱和某些酸的腐 蚀；（2）电镀镍结晶极其细小，并且具有优良的抛光性能。经抛光的镍镀 层可得到镜面般的光泽外表，同时在大气中可长期保持其光泽。所以，电 镀层常用于装饰；（3）镍镀层的硬度比

20、较高，可以提高制品表面的耐磨性， 在印刷工业中常用镀媒层来提高铅 表面的硬度。Advantages ：（1） Nickel electroplating coating is very stable in atmosphere, because the inactivation of Nickel is very strong; it will form an extra-thin Passivation Layer which can prevent the corrosion of atmosphere, alkali or some certain Acid; （2）, crystall

21、ine of electroplating nickel is extraly tiny, and with good performance of polishing, can keep LUSTROUS for a long time in atmosphere. Therefore, Nickel electroplating coating is often applied to decoration. （3）, hardness of Nickel electroplating coating is very high, can improve the wear resistance

22、 of the products surface. It is often used to enhance the hardness of lead surface.（4）镀镍的应用面很广，可作为防护装饰性镀层，在钢铁、锌压铸件、铝 合金及铜合金表面上，保护基体材料不受腐蚀或起光亮装饰作用;也常作为其他镀层的中间镀层，在其上再镀一薄层铬，或镀一层仿金层，其抗蚀性 更好，外观更美。在功能性应用方面，在特殊行业的零件上镀镍约 13mm 厚，可达到修复目的。特别是近年来在连续铸造结晶器、电子元件表面的 模具、合金的压铸模具、形状复杂的宇航发动机部件和微型电子元件的制e si i| oia t7d 、

23、uoipi se paiEiAOjqqE si aua|Xqi0OJon|EJi0iX|Od。樑澳餡U胡ifM易平吐聖黒 習丄型业为N宙#啟風助念帀地划沿诲鑒醫据胡日 WWWHW 何回。歴翅胡号地壬翅比去”樑輪聖黒習”塗“旨澳界比”助魁翔一幽口粵屈遁。昜td k3dld、uop丄魁圜 9U9|Xi0OJon|iEJi0iX|Od:剩卿：(UO|Q丄)駆粵鸟、0L uoiionpojdauEop pazneopue +9。|n|LUJEq aqi pauopuEqE X|0i0|dLuoo seq uqMUEQLU Buiieoo |0qXe| uiqi uaLuamuquia ua6ojpXq

24、 ou ouEisisaeom q6iq se qons (6uiieoo iqluojoeq 2 sq6eiueape aqi poiuoqui seq pue Snpod iqluojoeq 2 iemouqaqi si 10111009 :sq6eiueapvsjapuiq iBioads OL|1 OJUI saiOlldVd Lunuiiuniv pue ONIZ dVIiaiAIVI 9U!iEJi|n aqi 6uicIejm EIA 6u|IE00 0IUE6J0U! UE SI l| J9|JEp 9|ni| E SI SS0|6 S (6uilE00 19LU0J0EQ 屮

25、!M 6uuecIluoo JXej6qa|is uaaqs mo| si 6uiieoo 10111009 2 aouEJEoddE oq丄。睾 韦旱型丄血运+9Q 胡晕回号鸟胡翼旨澳哪疇生 矗 叫賈备軍？?丄宙薪習睾#谀堆重胡备軍？?# ( 19LUO90 )鸟美至：字衆丑送呂号翌畀蝎吐畀蝎超腸規:(13IAIO39 )鸟美至、6pEQjdsapiM 0JOLU PUB 9J0LU 6uiLU009q SI I! (uo os pue siuauodiuoo oiuojioaia iuilu |0 6uunioE|nuELu 9uQuo-oise |0 siuauodiuoo padEqs

26、-xoidLuoo (6uip|noLu 6uiiseo dip Xo|E (siuquocIluoo oiuojioaia |0 |oqs aqi |0 6uip|noLu uijseo snonuijuoo ojqziheisXjo ui Einoiped uisjeqX luaoau| /Edo|0 |eo6 aqi OAOiqou ueo (S9uisnpui lEioads qluosui siuauodiuoo aqi uoqXe| |羽5N luluL 6uiiE|d uoiiEOiiddE |Euoiioun| 01 6uu9|ay jauii aq him oouEJEadd

27、e aqi pue apaq aq him ooueiisquoqcluoo |0 aouELUJopad aqi (6uiieoo 6uiiE|d-!N oi|l uo poE|d si 6uiieoo p|o6 qaiieiilu! o (9Luojqo |0qXe| uiqi e |i 9|diuExoo (6uiieoo 6uiiE|daqjo aqioj 6uiieoo 6uiiE|d aippiLu e se pasn uo#o os|E si ” SuoiiEJOoap iq6uq * 羽eluo uoqcluoo luoj| iBuaiELuoelu oqi loaiojd h

28、im onvaddogo Lunuiiuniy (siuquocIluoo uiz jsEO-aip uo！o qois |0 aoEpns aqi uo sBuiieoo 6uiiE|d qaiiejooqp pue QAiiooiojd aqi se qons (sionpojd |0 q6ueapiM e o paiidde si 6uiiE|d-!N (t?) generally called as a “non-stick coating” or “easy-clean substances”. It is a Synthetic polymer material which has

29、 been replaced the hydrogen atom by fluorine Atom in polytene. The material has the characteristicses of acid resistance, alkali resistance and anti organic solvent. It is practically insoluble in solvent. It is also heat-resistant, PTFE has one of the lowest coefficients of friction against any sol

30、id, natrually, besides lubrication functions, it can be used as an ideal coating material for easy-cleaning purpose or in inner layer of waterpipes.优点：(1)不粘性；(2)耐热性；(3)滑动性；(4)抗湿性；(5)耐磨损性；(6) 耐腐蚀性。Advantages ： (1) no viscosity ； (2) heat resistance ； (3) low friction ； (4), weatherability； (5) wear r

31、esistance ； (6) corrosion resistance.11、镀锌： galvanization概述：镀锌是指在金属、合金或者其它材料的表面镀一层锌以起美观、防锈 等作用的表面处理技术。Galvanization (or galvanisation) is the surface finishing process by coating metal , alloy or other materials surfaces with a Zinc layer for the purposes of good look, anti-rust.优点：锌镀层较厚，结晶细致、均匀且无孔隙

32、，抗腐蚀性良好；电镀所得锌 层较纯，在酸、碱等雾气中腐蚀较慢，能有效保护紧固件基体，镀锌层经 铬酸钝化后形成白色、彩色、军绿色等，美观大方，具有一定的装饰性， 由于镀锌层具有良好的延展性，因此可进行冷冲、轧制、折弯等各种成型 而不损坏镀层。电镀锌所涉及的领域越来越广泛，紧固件产品的应用已遍 及机械制造、电子、精密仪器、化工、交通运输、航天等在国民经济中有 重大意义。Advantages: Zinc coating is a little thick, the crystal structure is uniform and compact, no POREs and with good cor

33、rosion resistance. The Zinc layer from electroplating is very pure and corroded slowly in the Acid or alkali fogs, which can protect the fasteners effectively. The Zinc layer can be white, colorful or SERGEANT GREEN etc after Chromic acid passivation. It is beautiful and decorative. Because the Zinc

34、 layer is malleable, it can be cold died, rolled or bendded to different shapes without damaging the coating. Electroplating Zinc is applied more and more widespread, the relevant fasteners has been used in machinery manufacturing, electronics industry, precise instruments, chemical industry, transportation industry, space industry and so on, and plays a significant role in national economy.