班组标准作业培训

上传人:仙*** 文档编号:179227227 上传时间:2022-12-31 格式:PPT 页数:64 大小:9.86MB
收藏 版权申诉 举报 下载
班组标准作业培训_第1页
第1页 / 共64页
班组标准作业培训_第2页
第2页 / 共64页
班组标准作业培训_第3页
第3页 / 共64页
资源描述:

《班组标准作业培训》由会员分享,可在线阅读,更多相关《班组标准作业培训(64页珍藏版)》请在装配图网上搜索。

1、This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYENCPSCPS标准化作业标准化作业2010年6月This copyrighted document is the property of TYEN and is disclosed in confiden

2、ce.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 避免瑕疵产品、操作失误、意外状况等重复发生,并纳入工作者的想法,进而维持高生产效率。这些之所以能做到,全是因为一份不起眼的标准化工作程序说明表。大野耐一 引 子This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be cop

3、ied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN一、标准化作业概述一、标准化作业概述二、二、SPS-QPSSPS-QPS系统系统三、标准化作业的执行与改善三、标准化作业的执行与改善主要内容主要内容This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or

4、used for manufacturing,without the prior written consent of TYEN.2009 TYENThis copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 一、泰勒科学管理与精益管理标准化的区别 在泰勒的科学

5、管理下,工作者被视为机器,必须通过工业工程师与专职管理人员的操纵,尽可能提高他们的工作效率,包含如下内容:合乎科学地决定执行工作的最佳方法。合乎科学地发展出一个最佳方法以训练员工执行工作。合乎科学地挑选最具能力以最佳方法执行此工作的员工。训练领导者以教导他们的属下,并且督促他们遵照最佳方法执行工作。制定财务奖励制度以促使员工遵循此最佳方法,并超越由工业工程师以科学方法制定的绩效标准。This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,discl

6、osed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 一、泰勒科学管理与精益管理标准化的区别 泰勒的科学管理方法确实显著地提高了生产力。但是,这些科学管理方法也造成非常僵化的官僚作风,结果造成:从上而下的控管。一本又一本的规则与程序说明。缓慢且复杂的执行与应用。沟通不良。抵制变革。僵化且缺乏效率的规则与程序。“强制性官僚制度”This copyrighted document is the property of TYEN and is disclosed in

7、confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 一、泰勒科学管理与精益管理标准化的区别 精益管理的标准化是在特勒科学管理的基础上进行授权的作业方式:强调最佳实务方法在员工参与下设计与改善所制定的标准实际上是帮助员工管理他们自己的工作作业标准是可以改善的最佳实务样板“授权性官僚制度”This copyrighted document is the property of TYEN and

8、 is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 一、泰勒科学管理与精益管理标准化的区别精益管理的标准化有许多弹性化“有机”组织的特征:员工积极参与充分沟通创新灵活弹性员工士气高昂高度关注顾客“民主的泰勒主义”This copyrighted document is the property of TYEN and is disclosed in con

9、fidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 二、工作的标准化是质量保证与持续改进的基础 当发现瑕疵时,询问的第一个问题一定是:“有没有按照标准化工作执行?”在解决问题的过程中,管理者会看着操作员依照标准化工作说明表所记载的步骤执行一遍,以检查其中是否有异,若此操作员完全依循标准化工作程序而仍然产生了瑕疵,那就表示这些标准步骤必须加以修正。This copyrighted document

10、 is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 二、工作的标准化是质量保证与持续改进的基础工艺的实际能力由标准化作业保证工艺工艺管理管理的工具的工具 作业标准作业标准化化 质量检查标准质量检查标准 过程能力指数控制过程能力指数控制 CP/CPKCP/CPK 三坐标测量三坐标测量 整车奥迪特评价整车

11、奥迪特评价靠制造靠制造 检查来保证检查来保证标准作业表标准作业表作业的入口作业的入口工艺能力工艺能力的的判断判断This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 二、工作的标准化是质量保证与持续改进的基础如果能够按照作业标准进行的话,无论谁都能生产出

12、同样质量的产品。遵守作业标准,就是保证质量,确保产量、降低成本、提高安全性等。标准化作业是制造现场的规则This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 二、工作的标准化是质量保证与持续改进的基础 现今的标准化是促成未来改善的必要基础,如果你把标准化

13、视为现在你能想到的最佳境界但却是未来可以做到的改善,你就能有所精进;但是,如果你把标准化当成设定种种限制,那么,你的流程就会停止。许多管理人员有一个错误观念,认为标准化就是找到执行某项工作的最佳科学方法,并且固定地实施此方法。标准化作业是持续改进的基础This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written

14、consent of TYEN.2009 TYEN 二、工作的标准化是质量保证与持续改进的基础标准化作业是持续改进的基础 SDCASDCA是PDCAPDCA的基础,PDCA的最后一个阶段就是SDCA的开始标准化This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009

15、TYEN 二、工作的标准化是质量保证与持续改进的基础作业标准得以遵守 如果作业中发生异常(次品)的话,易于查找原因,制定对策。没有作业标准的地方就没有改善 不能判断正常还是异常的地方,无法进行改善。This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 三

16、、标准化作业的两大内容():标准化作业的条件 是以人的动作为中心的作业 要多次重复的作业 制成的标准是在作业现场进行实施():标准化作业的要素 节拍 作业步骤 标准维持(在制品库存)This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 三、标准化作业的两

17、大内容节拍实际运行节拍 作业步骤操作者制造产品时、对部件,物品的搬运、装卸到设备、质量的确认等,由人来决定作业的顺序。标准维持由于按作业顺序要反复操作、在工序内持有的最小加工品、(包括附属于设备的物品)运转时间(H/日)每天必要数量 运转率标准化作业的要素:This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior writt

18、en consent of TYEN.2009 TYEN 三、标准化作业的实施领域生产车间:铸造、机加、冲压、焊接、涂装、总装 设备维护物流作业:搬运、配送、打包、检查质量检查:工序内的检查、整车质量检查所有需要人进行操作和执行的作业区域This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent

19、 of TYEN.2009 TYENThis copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 一、品质程序系统-QPS(Quality Process System)由一系列的表格组成,是控制过程质量的工具和标准,也是作业人员进行持续改善的基础.作业指导书作

20、业指导书工作要素表工作要素表工作分析表工作分析表工作平衡图工作平衡图 产能分析表产能分析表QPS This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 二、标准作业三表作业指导书、工作要素表、工作分析表统称为作业三表作业指导书作业指导书决定标准作业顺序的

21、书面表格 工作要素表工作要素表记录作业时“特别注意事项”的表格,是 对新员工进行培训的最好的工具工作分析表工作分析表明确各工序的手工作业、歩行时间等表明在节拍内的作业内容的表格丰田TPS生产方式中分别为-作业手顺书、作业要领书、标准作业组合票This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written conse

22、nt of TYEN.2009 TYEN作业指导书样表This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN作业指导书的主要内容 1 1.厂区厂区 2.2.部部门门/班別班別 3.3.工序名称工序名称 4.4.产品产品名名称称 5.5.料号料号 6.6.员

23、员工工作业类别作业类别 7.7.QPSQPS编号编号 8.8.日期日期 9.9.页页次次 10.10.顾顾客需求速率客需求速率11.11.周周期時間期時間12.12.作作业业內容內容13.13.步骤步骤14.14.注意事項注意事項15.15.符号标示符号标示16.16.作业顺序图作业顺序图17.17.重重点标点标示示18.18.个个人人防护具防护具19.19.签签名名This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to

24、others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN作业指导书的重要知识点一生产周期与顾客需求速率v顾客需求速率顾客需求速率 =目标时间目标时间 =v单班平均产量单班平均产量UPD =UPD =v生产周期时间生产周期时间 =手动作业时间+走路时间机器时间分秒单班可用时间/60*UPD每班有效工作时数有效工作时数产量*开班数工作天数总产量*我们要通过改善尽量使生产周期时间顾客需求速率This copyrighted document is the property of TYEN

25、and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN作业指导书的重要知识点二有价值时间、无价值时间有价值时间、无价值时间 在生产周期时间当中的手动作业时间分为有价值时间和无价值时间。在生产周期时间当中的手动作业时间分为有价值时间和无价值时间。何谓有价值和无价值?何谓有价值和无价值?能产生附加价值就叫有价值。反之亦然。任何能将物料转换、加工和改能产生附加

26、价值就叫有价值。反之亦然。任何能将物料转换、加工和改变成顾客所需之产品的作业步骤的时间(顾客愿意为它付钱的动作)就叫有变成顾客所需之产品的作业步骤的时间(顾客愿意为它付钱的动作)就叫有价值时间。价值时间。This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYE

27、N作业指导书的重要知识点二有价值时间、无价值时间有价值时间、无价值时间不产生附加值的作业实质作业浪费 等待等待 没有意义的搬运没有意义的搬运(临时放置临时放置)多余的动作多余的动作 生产过剩生产过剩 库存库存 不合格品的修复(返修)不合格品的修复(返修)多余的加工(流程)多余的加工(流程)零件安装零件安装 喷涂喷涂 切削切削 冲压冲压 焊接焊接 取零件取零件、工具的行走工具的行走 零件的开箱作业零件的开箱作业 零件的重新更换作业零件的重新更换作业 按键按钮(如安顿)的操作按键按钮(如安顿)的操作 搬运作业搬运作业消除浪费是精益生产的核心消除浪费是精益生产的核心作业内容作业内容的构成的构成Thi

28、s copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN作业指导书的重要知识点三作业顺序图1、作业起始和终止的位置2、作业行走路线和作业位置3、物料及设备布置This copyrighted document is the property of TYEN and

29、 is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN作业指导书的各种标识v 安全法规安全法规/人体工学标识,人体工学标识,该标识表示作业工作中安全方面该标识表示作业工作中安全方面的工作性质。作业员按作业指导书上的动作步骤进行作业时,通过在动作的工作性质。作业员按作业指导书上的动作步骤进行作业时,通过在动作步骤后加注该标识,提醒作业员要注意的安全事项步骤后加注

30、该标识,提醒作业员要注意的安全事项或国家法规中规定在特或国家法规中规定在特定场合中需要满足的安全生产条件(由安定场合中需要满足的安全生产条件(由安全部门提供相关资料或对车间进全部门提供相关资料或对车间进行指导,进行安全辩识,并填充相关内容行指导,进行安全辩识,并填充相关内容)。v 特性标识,该标识表示质量、技术要求中各工序关重的特特性标识,该标识表示质量、技术要求中各工序关重的特性要求或技术参数(参考资料:控制计划、工艺特性清单等)。性要求或技术参数(参考资料:控制计划、工艺特性清单等)。v 在制品标识,该标识表示作业内容是对来料进行再一次加工在制品标识,该标识表示作业内容是对来料进行再一次加

31、工形成安装上车体的组装部分的动作步骤。形成安装上车体的组装部分的动作步骤。v QCO QCO 快速转换标识,通过改善或优化动作实现了工作步骤的精简快速转换标识,通过改善或优化动作实现了工作步骤的精简需注以该标识。需注以该标识。This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TY

32、EN.2009 TYEN作业指导书的各种标识v 可视化工厂标识,作业指导书若附有可视化教具且与可视化工厂标识,作业指导书若附有可视化教具且与作业者操作有关,需加注该标识提醒作业者查看可视化教具。作业者操作有关,需加注该标识提醒作业者查看可视化教具。v CTPM CTPM 设备维护标识,若班组作业内容中涉及设备检查设备维护标识,若班组作业内容中涉及设备检查等内容的需加注该标识。等内容的需加注该标识。v D D 防呆措施标识防呆措施标识,改良改善的措施在实施过程中涉及与改良改善的措施在实施过程中涉及与作业者操作内容有关的需加注该标识作业者操作内容有关的需加注该标识.v 环保标识环保标识,作业完后产

33、生的废物作业完后产生的废物,作业员按车间要求放入作业员按车间要求放入指定地点指定地点.若作业后有此项工作内容需加注该标识说明若作业后有此项工作内容需加注该标识说明.This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN工作要素样表This copyrigh

34、ted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 1.1.工序名称工序名称 4.4.工位号工位号 5.5.工程图编号工程图编号 6.6.要素表编号要素表编号 7.7.QPSQPS编号编号 8.8.版本版本日期日期 9.9.符号符号 10.10.车型车型11.11.周周期時間期

35、時間12.12.作作业业內容內容13.13.作业要领作业要领14.14.作业要点作业要点15.15.使用工具及型号使用工具及型号16.16.修订记录修订记录17.17.问题记录问题记录18.18.图示图示工作要素表的主要内容This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYE

36、N.2009 TYEN工作要素表的重要知识点 作业内容、作业要领、作业要点作业内容:作业内容:与作业指导书中的作业内容一一对应做什么作业要领:作业要领:作业的具体要求,如:动作顺序、姿势、设备工 具、时间等怎么做作业要点:作业要点:对产品最终状态的要求做到什么程度This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior wr

37、itten consent of TYEN.2009 TYEN工作要素表的重要知识点二 图示2A此位置开始顺时针方向涂抹左后三角窗框底涂图示编号2A关注位置,与作业要点里的内容对应HHHHH标注作业起始位置及作业动作顺序This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.

38、2009 TYEN工作分析表样表This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 1 1.工序编号工序编号 2 2.工位名称工位名称 3.3.部门名称部门名称 4 4.作业顺序作业顺序 5 5.作业时间作业时间 6 6.TTTT与与CTCT工作分析表

39、的主要内容This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN工作分析表的知识点一 TT与CT TT=标准作业时间(节拍时间)CT=实际作业时间(包含更换设备、工具等的时间)This copyrighted document is the propert

40、y of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN工作分析表的知识点二 时间与动作符号手动作业时间步行时间步行和手动作业同时TTCT与TT的差值(可正可负)非循环往复的作业时间This copyrighted document is the property of TYEN and is disclosed in confiden

41、ce.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 工位平衡图工位作业者节拍作业时间 工作平衡图以图表方式显示工作小组在一个工作周期中进行的所有工作要素或步骤。它确认该工序是否超过或小于顾客需求速率。每一名操作员所需的时间柱状图应由每个程序步骤的时间组成。三、工位平衡图与产能分析表This copyrighted document is the property of TYEN and is disclo

42、sed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 工位平衡图的主要内容 1 1.作业时间作业时间 2 2.工位号工位号 3.3.作业者姓名作业者姓名 4 4.节拍时间节拍时间 This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copie

43、d,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 工位平衡图与工作分析表的关系 工作分析表与工作平衡图都是通过工作时间来判断工作是否均衡,但不同之处在于工作分析表针对的是个体工作节奏存在问题的原因,工作平衡图针对整个班组中个体之间的工作是否平衡。This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,

44、disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN应用工位平衡图进行改善T.T220S901902903904905906907工位号工位号焊接车间某班组工位平衡图This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturin

45、g,without the prior written consent of TYEN.2009 TYEN应用工位平衡图进行改善902906902906工作合理分配与利用人力资源的有力工具!改进后改进后 通过工位工作量(焊点数量)的调整,将906的工作量调整出一部分到902工位,保证了906工位的作业时间在节拍时间以内,同时减少了902工位过多的等待时间。140250182208This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclos

46、ed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN产能分析表This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN产能分析表的

47、主要内容 产能分析表显示的是每一生产制作过程的产能,通过产能分析表的应用可以对找出生产线的问题点及瓶颈生产制作工序,整体评价设备绩效(每次作业生产所能产出数量的能力,主要内容如下:1 1.签署栏签署栏 2 2.产品代号、产品名称产品代号、产品名称 3.3.生产线或班组名称生产线或班组名称 4 4.日产量及人数日产量及人数 5.5.生产制作过程生产制作过程 6.6.作业时间作业时间 7.7.加工产能加工产能 产能分析表更多地应用在设备较为集中的工作区域,例如冲压、机加。This copyrighted document is the property of TYEN and is disclos

48、ed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 四、定位置停止作业方式 定位置停止作业方式(fixed-position line stop system)即安灯制度,即授权员工停止组装线的权利,使每位员工在一看到异于标准的情况时,立即按下安灯按钮或者拉动绳索进行呼叫,以使领导者(管理人员)能够迅速反应,以解决问题。This copyrighted document is

49、the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN定位置停止作业方式的目的作业状况非常清楚:作业量明确化:产生等待时间的原因一目了然:作业位置始终不变生产节拍不能保证时一但发生异常,操作者按按钮呼叫班组长或“异常”立即处理异常情况异常处理未完时,停在所指定的位置异常处理后再开动生产线 操作位置始终不变操作位置

50、始终不变.便于标准化作业的便于标准化作业的遵守遵守 发生异常时停线处理发生异常时停线处理,确保质量确保质量,能防止能防止不良品不良品流入下一工位流入下一工位 作业进度可视作业进度可视化化不断不断改善改善作业状况作业状况:作业延迟、作业失败:发现不合格的零件 发生质量问题This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior

51、 written consent of TYEN.2009 TYEN定位置停止作业方式介绍n 作业从定位停止线开始,到下一 定位停止线结束n 作业未完时,在 定位线停线.工位:定位停止线等分线黄色工序管理显示屏:安灯系统停止可动工位呼叫停止 黄红色呼叫线白色呼叫用拉线开关作业中发生问题时、用呼叫开关寻求支援(在安灯系统显示屏上显示)作业是从定位停止銭开始、定位停止銭終止作业未完成的情況下,要在定位停止銭停线当作业发生问题时、使用呼叫按鈕呼叫异常工序管理板:电子显示运行细绳开关This copyrighted document is the property of TYEN and is dis

52、closed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN定位置停止作业方式介绍作业开始作业未完成时生产线停止呼叫线作业结束作业延迟定位停止線作业开始呼叫銭定位停止銭作业延误(异常)作业结束作业未完成时生产銭停止This copyrighted document is the property of TYEN and is disclosed in confidence.It

53、may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN定位置停止作业方式演示1L1R停止可动工位呼叫停止 运行呼叫后作业班组长或者经过“异常”的处理后完成,生产线不会停止2413This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,o

54、r used for manufacturing,without the prior written consent of TYEN.2009 TYEN定位置停止作业方式演示1L2L停止可动工位呼叫停止 运行呼叫后作业无法完成,生产线自动停止2413This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written c

55、onsent of TYEN.2009 TYEN定位置停止作业方式的保证分段停止的生产线 很多企业在推行定位置停止作业方式的时候,错误地认为一旦发生问题就要把整条生产线停下来,因此真的将整条生产线停了下来。上线下线缓冲区缓冲区 我们通过将生产线分段,在段间设置缓存,避免整条线的停止。This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without th

56、e prior written consent of TYEN.2009 TYEN 五、标准化作业举例物流作业化作业工位平衡图This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 五、标准化作业举例机加标准化作业This copyrighted docu

57、ment is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 五、标准化作业举例This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed

58、to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYENThis copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 一、标准化作业的执行过程制

59、造技术部门制造技术部门制造现场制造现场(监督监督者者)制造部门制造部门品质品质管理管理部门部门品质保证部门品质保证部门设计部门市场信息市场信息输入输出商品设计信息市场、品保信息 技术技术(加工加工)信息信息 規格規格、标准信息标准信息输入输出 规格规格、标准信息标准信息 工作工作技术信息技术信息 标准类文件的认可标准类文件的认可加工技术信息市场、品保信息 标准标准表表作成、修改作成、修改 表的表的日常日常管理管理規格、标准信息工作技术信息输入标准作业的遵守输出承认认可认可商品企商品企划划作业的标准的形成过程This copyrighted document is the property of

60、 TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN标准化作业在生产现场的确认消除不标准的作业设计、生产准备技术人员图纸技术参数资料现场技术人员管理、监督者作业人员各标准书各标准书指示设计、生产准备、技术员对自己制定的图纸、技术参数是否在现场得到正确实施,需要亲自目示 检查确认、现场技术人员对自己制定以及认可的项目是否在现场得到正确实施进行

61、亲眼确认管理、监督人员对各工位是否遵守规定的作业顺序是否遵守作业要点是否难于操作、难于遵守进行定期观察This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN标准化作业的遵守与改善管理管理 监督人员监督人员作业人员制作便于遵守的标准 必须遵守作业标准必须遵守

62、作业标准、标准书的修订 修正不便于遵守的标准修正不便于遵守的标准对作业人员的提案进行讨论观察现场进行改善 对难于遵守 不方便操作 及逆行提案 正确指导正确指导 经常观察经常观察 积极的提案积极的提案对自己的工作具有改善意识具有发现标准错误以及修正的能力This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written

63、consent of TYEN.2009 TYEN 二、标准化作业改善的着眼点 对对人人的的改善改善减少等待时间缩短步行距离使取件更容易化缩短手工作业时间(半自动)废除对设备的监视工作 对设备的对设备的改善改善缩短输送、返回时间(进车、回程时间)缩短加工时间以外的作业动作暂时(喘息)停止、对策对最大、最小库存进行管理减少制造堆积(标准维持)按顺序送料多次送料 提高质量提高质量彻底防止再发生提高直行率(FTT)(减少生产线外的修复)确保工序内实现质量保证 降低库存降低库存 推行标准化作业的最终目标也是通过持续改善不断消除生产现场的各种浪费This copyrighted document is

64、the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN 三、标准化作业案例介绍车窗底涂工位标准化作业 主要工作内容:车窗底涂、左右空气出气口总成安装、千斤顶支架安装This copyrighted document is the property of TYEN and is disclosed in confi

65、dence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN1、作业流程步骤作业序号作 业 内 容作业前开线前穿好劳保用品,检查风扳机是否正常作业中1取工具箱和千斤顶支架2取清净布和底涂材料3清洁后挡风窗玻璃窗框4涂后挡风窗玻璃窗框底涂5打开背门6到工具吊篮,拿2件空气出气口总成(5104160-C01)取掉不干胶7拿空气出气口总成带附件件、风扳机、螺栓1棵、螺栓1棵、门槛护换螺母(09148-06002)4

66、颗到背门8安装左右空气出气口总成9安装背门槛护换螺母10安装千斤顶支架11安装千斤顶总成回到起点作业后下班后将工具劳保用品放回定置区域This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.2009 TYEN3、根据作业步骤和位置画线红色:定位置停止线黄色:呼叫线白色:作业等分线蓝色:作业步骤线This copyrighted document is the property of TYEN and is disclosed in confidence.It may not be copied,disclosed to others,or used for manufacturing,without the prior written consent of TYEN.

展开阅读全文
温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 装配图网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

copyright@ 2023-2025  zhuangpeitu.com 装配图网版权所有   联系电话:18123376007

备案号:ICP2024067431-1 川公网安备51140202000466号


本站为文档C2C交易模式,即用户上传的文档直接被用户下载,本站只是中间服务平台,本站所有文档下载所得的收益归上传人(含作者)所有。装配图网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。若文档所含内容侵犯了您的版权或隐私,请立即通知装配图网,我们立即给予删除!