SAPECC系统安装

《SAPECC系统安装》由会员分享，可在线阅读，更多相关《SAPECC系统安装（49页珍藏版）》请在装配图网上搜索。

1、ERP项目生产系统安装文档日期版本描述作者目录1规划21.1系统构架21.2参数规划21.3文件系统的规划31.4用户以及组的规划42安装准备42.1操作系统的准备42.2用户以及组的建立72.3安装前检查73系统安装83.1ASCS安装83.2安装DB153.3安装Oracle 补丁333.4安装CI393.5安装DI473.6安装另一台DI531 规划1.1 系统构架系统构架图如下：详细的HA构架图见1.2 参数规划规划参数参数值Installation SAP systemECC 6.0，AS ABAPsap system idPRDdatabase idPRDinstance numb

2、er00HostnameSAPERPPRDA，SAPERPPRDBmessaging service portusing default: 3600，3900master passwordSAPERP001System administrator userPRDadm (sapinst will create them automatically during installation)sap solution manager key(need to gernerate by solution manager. Using the parameter hostname and sap syst

3、em id.)File systemSee blowdb code pageUnicodedatabase schemaABAP: sapsr3database os userOraPRD1.3 文件系统的规划VGVG Size （GB）Share (Y/N)Primary NodeFailover NodeLVFile System Initial Size（GB）PRDdbvg 1300YSAPERPPRDASAPERPPRDBPRDoraPRD /oracle/PRD20PRDmirrlogA /oracle/PRD/mirrlogA5PRDoriglogA /oracle/PRD/or

4、iglogA5PRDmirrlogB /oracle/PRD/mirrlogB5PRDoriglogB /oracle/PRD/origlogB5PRDsapdata1 /oracle/PRD/sapdata1200PRDsapdata2 /oracle/PRD/sapdata2200PRDsapdata3 /oracle/PRD/sapdata3200PRDsapdata4 /oracle/PRD/sapdata4200PRDsapdata5 /oracle/PRD/sapdata5200PRDsapdata6 /oracle/PRD/sapdata6200PRDarchvg100YSAPE

5、RPPRDASAPERPPRDBPRDoraarch/oracle/PRD/oraarch100PRDsapvg100YSAPERPPRDASAPERPPRDBPRDsapmnt/export/sapmnt/PRD10PRDtrans/export/usr/sap/trans20PRDdata/export/sapdata30PRDdivg50NSAPERPPRDA-PRDoracle/oracle5PRDstage /oracle/stage10PRDusrsap/usr/sap20PRDcsvg50YSAPERPPRDBSAPERPPRDAPRDascs/usr/sap/PRD/ASCS0

6、010PRDcivg50NSAPERPPRDB-PRDoracle/oracle5PRDusrsap/usr/sap20PRDdivg50NSAPERPPRDC-PRDoracle/oracle5PRDusrsap/usr/sap20详细的存储需求详见1.4 用户以及组的规划userUidgroupGidPRDadm301sapsys901oraPRD302oper902Dba903sapinst904userprimary groupgroup sethomePRDadmSapsyssapsys,sapinst,oper,dba;/home/ed1admoraPRDDbasapsys,sap

7、inst,oper,dba;/oracle/oraed12 安装准备2.1 操作系统的准备=OS Requirements - ECC 6.0 Installation (HP-UX & Oracle)=- Operating system (OS)HP-UX 11.31 Itanium#uname -r- Language LibrariesMake sure that the file set LANG-MIN is installed. #swlist -v | grep -i lang-min- Network File System (NFS)The NFS driver must

8、be in the kernel.You can check this using the current kernel configuration files. Enter the followingcommand:#grep nfs /stand/systemTo check whether NFS is running, enter the following commands:#ps -ef | grep nfsd#ps -ef | grep rpcbindEither NFS_CLIENT, NFS_SERVER, or both should be set to 1. You ca

9、n use SAM or SMH tostart NFS or/and add the driver to the kernel.- National Language Support (NLS)Enter the following command to check whether National Language Support (NLS) is installed.#swlist -v | grep -i nlsThe output should contain the string NLS-AUX .Enter the following command to check which

10、 locales are available:#locale -aThe following files must be available:de_DE.ISO8859-1,en_US.ISO8859-1.Zh_CN ISO8859-1- OS Patch (Note 837670)HP-UX 11.31 Itanium and PA-RISC (HP-UX 11iv3) FEATURE11i B.11.31.0709.312 Feature Enablement Patches for HP-UX 11i v3, September 2007HWEnable11i B.11.31.0709.

11、312 Hardware Enablement Patches for HP-UX 11i v3, September 2007QPKBASE B.11.31.0709.312a Base Quality Pack Bundle for HP-UX 11i v3, September 2007OS-PatchPHKL_36883PHKL_37452Only for VxFS 5PHKL_38260Oracle on HP-UX 11.31:(Note 1031960)- PHKL_35936- PHKL_36054 - Java Version (Note 716926)- C+ Runtim

12、e EnvironmentC+ Runtime Environment must be installed#swlist l product | grep PHSS- OS Kernal Parameter (SAP Note 172747)HP-UX 11iv3 (11.31)CHECK a kernel parameter: kctune SET a kernel parameter: kctune =check DEFAULT parameter value: kctune -v - To check VxFS version use swlist -l product |grep -i

13、 base vxfs (If no version number is displayed then version 3.x is installed) Message parameters msgmnb 65535 msgmni 4096 msgtql 4096 Semaphores semmni =8192 semmns =16384 semmnu 4092 Shared Memory shmmax Set equal to installed system RAM (in bytes) shmmni =512 Filesystem maxfiles =4096 nflocks 8192

14、vx_ninode 131072 (for VxFS 4.x and VxFS 5.x) 40000 (for VxFS 3.x) vxfs_ifree_timelag -1 (only in combination with vx_ninode as above) Process Management maxuprc 4096 max_thread_proc =3000 (Java dependent, see note 534867) nkthread =10.000 (Java dependent, see note 534867) Miscellaneous process_id_ma

15、x default (30000) (SAP PIDs are restricted to 8 digits. process_id_max must not exceed 99999999) process_id_min default (0) filecache_max 8 (Percent) (or lower if using direct I/O, see note 1077887) filecache_min 5 (Percent) (or lower if using direct I/O, see note 1077887) (If the HP-UX Server has 4

16、GB RAM, then lower settings for Filecache size could be more appropriate.)- Swap space:at least 40 GB- File System:/ 2GB/tmp5GB2.2 用户以及组的建立按照规划的用户，用户ID，组，组ID，建立操作系统的用户和组；2.3 安装前检查在各台机器上运行sap pre-check检查；到/sapinst/IM_HPUX/IM_HPUX_IA64/，运行./sapinst检查通过后，可以开始安装；3 系统安装3.1 ASCS安装Install ASCS on SAPERPPRD

17、B Logon to SAPERPPRDBexport SAPINST_JRE_HOME=/opt/java1.4export SAPINST_USE_HOSTNAME=SAPERPPRDCS=3.2 安装DBInstall DB Instance on SAPERPPRDALogon to SAPERPPRDAexport SAPINST_JRE_HOME=/opt/java1.4export SAPINST_USE_HOSTNAME=SAPERPPRDDB Install Oracle Software 3.3 安装Oracle 补丁Continue with sapinst3.4 安装C

18、IInstall CI on SAPERPPRDBLogon to SAPERPPRDBexport SAPINST_JRE_HOME=/opt/java1.4note: Do NOT set SAPINST_USE_HOSTNAME3.5 安装DIInstall DI on SAPERPPRDALogon to SAPERPPRDAexport SAPINST_JRE_HOME=/opt/java1.4export JAVA_HOME=/opt/java1.4note: Do NOT set SAPINST_USE_HOSTNAME3.6 安装另一台DIInstall DI on SAPERPPRDCLogon to SAPERPPRDCexport SAPINST_JRE_HOME=/opt/java1.4export JAVA_HOME=/opt/java1.4