《桩基施工安全方案模板》由会员分享，可在线阅读，更多相关《桩基施工安全方案模板（5页珍藏版）》请在装配图网上搜索。
1、基施工安全方案桩基施工安全方案(WMS)Work Management System中国化学CNCEC1.安全保证措施 Safety Assurance Measures1.1正确使用各类劳动防护用品Correct usage of PPEi. 进入施工现场作业人员一律穿结实的耐油底或钢头皮帮的防砸工作鞋。 在水坑内及积水处工作时必须穿防穿刺防水胶靴。Anyone who enters into the construction site has to wear strong antismashing work shoes. If you work in the water pond or f
2、looded area, gumboots will be necessary.ii. 进入施工现场作业人员必须佩戴符合国家标准的安全帽。如果安全帽 超过有限期限、破裂或已损坏时立即更换。Anyone who enters into the construction site must wear qualified safety helmet. If the safety helmet is over the expiry date or damaged, then it must be replaced with new one.iii. 在施工作业中易于烧手、刺手、烫手或严重磨手的作业必须
3、佩戴相应 手套;电焊、气焊作业时佩戴绝缘隔热阻燃的电焊专用手套;电工佩戴绝缘手套。Workers have to wear proper gloves when they carry out those works which may damage hands in the process of construction; welding gloves and insulating gloves shall be equipped to welders and electricians, respectively.iv. 在有可能出现飞溅物体时如切屑、冲刷、撬、敲打等，佩戴防护眼镜 和围巾。焊
4、接、切割作时佩戴防冲击和热辐射的防护面罩，在有引发危险可能时设置防护网或屏 障。Safety goggles and scarfs shall be equipped to workers if any flying objects may be occurred. The relevant face shield also must be equipped to workers when they are welding or cutting something, protective nets or protective barriers have to be set up if nece
5、ssary.v. 个人防护用品是实现安全生产的一项强制性预防措施，不得随意变更或 降低标准。No one could randomly change or lower the standards of PPE, because the usage of PPE is the most effective and preventive way to implement safe production.vi. 使用防护用品前应检查用品的安全性能,并做好防护用品的保养和保 存。PPE should be inspected prior to usage, besides, they also hav
6、e to be saved and maintained well.1.2 设置安全警示标志标识Set up safety warning signsi. 根据作业区域的危险程度及时设置相应的安全标志，多个安全标志牌在 一起设置时,应按警告、禁止、指令、提示类型的顺序，先左后右、先下后上排列。The relevant safety signs should be set up in accordance with the hazard level of construction area. When those safety signs are set up at the same time,
7、 they should be divided as per the functions, such as warning, prohibition, instruction and notice, besides, they shall be arranged in the principle of left-first and up-first”.ii. 安全标志牌和标签应设在与安全有关的醒目地方，并使现场人员看见后, 有足够的时间来注意它所表示的内容;局部信息标志应设在所涉及的相应危险地点或设 备(部件)附近的醒目处。Safety signs and safety labels shou
8、ld be sticked to somewhere eyecatching. Some of these signs should be set up to a prominent place where is near relatively dangerous place or equipment (parts).iii. 安全标志牌和标签不应设在门、窗、架等可移动的物体上，以免这些 物体位置移动后，看不见安全标志。标志牌前不得放置妨碍认读的障碍物。Safety signs and lables should not be set up on door, window or somethi
9、ng movable which would make these signs hard to be found. Never place any barriers in front of signboard.iv. 安全标志牌和标签应设置在明亮的环境中。Safety signboard or lables should be placed in somewhere bright.v. 安全标志牌的固定方式分附着式、悬挂式和柱式三种。悬挂式和附着 式的固定应稳固不倾斜，柱式的安全标志牌和支架应牢固连接在一起。Safety signboard could be fixed in different ways, however, they must be stable.
桩基施工安全方案模板
