成本会计-chapter

《成本会计-chapter》由会员分享，可在线阅读，更多相关《成本会计-chapter（21页珍藏版）》请在装配图网上搜索。

1、CHAPTER 7Joint Product and By-Product CostingLEARNING OBJECTIVESAfter studying this chapter, you should be able to:1.Identify the characteristics of the joint production process.2.Allocate joint product costs according to the benefits-received approaches and the relative market value approaches.3.De

2、scribe methods of accounting for by-products.4.Explain why joint cost allocations may be misleading in management decision making.5.Discuss why joint production is seldom found in service industries.CHAPTER SUMMARYThis chapter describes the joint production processes and their outputsjoint products

3、and by-products. Several methods are developed to allocate joint costs to joint products. By-products are not usually allocated any of the joint costs. Instead, noncost methods are frequently used to account for by-products. This chapter concludes with the caution that allocated joint costs are not

4、useful for output and pricing decisions. Further processing costs are used in management decision making.CHAPTER REVIEWLearning Objective #1I.General Characteristics of Joint ProductionJoint products are two or more products produced simultaneously by the same process.Joint products become separate

5、and identifiable at the split-off point.Review textbook Exhibit 7-1, which depicts the joint production process.A.Cost Separability and the Need for Allocation1.Joint costs are the total of the raw material, labor, and overhead costs incurred up to the initial split-off point.a.Joint costs can be al

6、located to the final product only in some arbitrary manner because such costs cannot be traced directly to the products they benefit.b.Joint cost allocation is performed to meet the requirements of financial reporting (GAAP) and federal income tax law for income measurement and inventory valuation.

7、In addition, joint cost allocation is useful in costing for government cost-type contracts and in justifying prices for legislative or administrative regulations.c.Joint cost allocation is much less useful for cost control and managerial decision making.2.Separable costs are those costs incurred aft

8、er the split-off point; they can be easily traced to individual products.B.Distinction and Similarity Between Joint Products and By-Products1.The distinction between joint products and by-products rests solely on the relative importance of their sales value.2.A by-product is a secondary product whos

9、e total sales value is relatively minor in comparison with the sales value of the main product (joint product).3.Relationships between joint products and by-products change over time as technology and markets change.a.By-products may become more and more important, eventually becoming joint products

10、.b.When the relative importance of individual products changes, the products need to be reclassified and the costing procedures need to be changed.Review textbook Exhibit 7-3, which gives examples of joint products and by-products for various industries.Learning Objective #2II.Accounting for Joint P

11、roduct CostsA.Introduction1.Joint cost allocations must be done for financial reporting purposes: to value inventory and to determine income. An allocation method must be found, though arbitrary, to allocate the joint costs as reasonably as possible.2.The joint cost allocation approaches include the

12、 following:a.Benefits-received approaches, which include the following methods:n Physical units methodn Weighted average methodb.Allocation based on the relative market value, using the following methods:n Sales-value-at-split-off methodn Net realizable value methodn Constant gross margin percentage

13、 methodn Sales-to-production-ratio methodB.Benefits-Received Approaches1.Physical Units Methoda.Under the physical units method, units of physical output, such as heat content, volume, or weight, that measure the benefits received are used to distribute joint costs. This method allocates to each joi

14、nt product the same proportion of joint costs as the underlying proportion of units.n Example:Manufacturers of forest products use the physical units method to apply the average conversion cost to all finished products, regardless of their type, grade, or market value.b.Disadvantages of the physical

15、 units method include the following:n It ignores the fact that not all costs are directly related to physical quantities.n It may result in incorrect managerial decisions because high profit may be reflected from the sale of high-grade products, with low profit or losses reflected from the sale of l

16、ow-grade products.2.Weighted Average MethodThe weighted average method uses the weight factors to include such diverse elements as amount of material used, difficulty to manufacture, time consumed, difference in type of labor used, and size of unit.Weighted physical units = Number of units Weight fa

17、ctorn Example:The canning industry uses weight factors to distinguish between can sizes or quality of product. The weighted average method allocates relatively more of the joint cost to the high-grade products because they represent more desirable and profitable products.C.Allocation Based on Relati

18、ve Market ValueThe methods in this approach try to assign costs based on the products ability to absorb joint costs. They are based on the assumption that the joint costs would not be incurred unless the products yield enough revenues to cover all costs plus a reasonable profit.The relative market v

19、alue approach of allocation is better than the physical units approach if (1) the physical mix of output can be altered by incurring more (or less) total joint costs, and (2) this alteration produces more (or less) total market value.1.Sales-Value-at-Split-Off Methoda.The sales-value-at-split-off me

20、thod allocates joint cost based on each products proportionate share of market or sales value at the split-off point.b.In this method, the higher the market value, the greater the joint cost assigned to the product.2.Net Realizable Value Methoda.The net realizable value method allocates joint costs

21、based on hypothetical sales values because there may not be a ready market for the product at the split-off point.b.This method is particularly useful when one or more products cannot be sold at the split-off point but must be processed further.Hypothetical sales value = Market price Further process

22、ing costs after split-off point3.Constant Gross Margin Percentage Methoda.The constant gross margin percentage method allocates joint costs such that the gross margin percentage is the same for each product.b.This method assumes that the further processing yields an identical profit percentage acros

23、s all products.c.Using the constant gross margin percentage method, the joint cost allocation steps include the following calculations:Grand gross margin percentage = Joint product gross margin = Market price Grand gross marginJoint cost allocated to product = Market value Gross margin Separable cos

24、ts4.Sales-to-Production Ratioa.The sales-to-production-ratio method allocates joint costs in accordance with aweighting factor that compares the percentage of sales with the percentage of production.b.In this method, the products that sell the most are allocated a larger share of the joint cost of c

25、urrent production.c.Using the sales-to-production-ratio method, the joint cost allocation steps include:(1)Compute the percentage of total sales based on the joint product units sold.(2)Compute the percentage of total production based on the joint product units produced.(3)Compute the sales-to-produ

26、ction ratio of the joint product.Sales-to-production ratio = (4)Use the sales-to-production ratio to allocate joint cost.5.The limitations of allocation based on relative market value include the following:n All methods are based on price. If price is used to determine cost, then those costs cannot

27、be used to determine price. The decision would be circular.n Changes in relative market prices will cause changes in the costs allocated to the product, even when there has been no change in total costs or the method of production.n Using allocation based on relative market value produces the same m

28、argin per dollar of allocated cost. This could be misleading to management if the impression is created that all products are equally profitable.Learning Objective #3Review textbook Exhibit 7-5, which summarizes the joint cost allocation methods.III.Accounting for By-ProductsA.Introduction1.The main

29、 objective of by-product accounting is to determine income and inventory for financial reporting purposes. By-products are of less significance than the main products and may not require precise cost allocation.2.Relevant factors that influence by-product valuation and accounting include:n The uncer

30、tainty of by-product value at the time of production.n The use of the by-product in other production.n The use of the by-product as an alternative to main products.n The need for separate profit calculations for sales incentives or for control.3.By-products can be accounted for using the following:a

31、.Noncost methodsn Other incomen By-product revenue deducted from main product costb.Cost methodsn Replacement cost methodn Total costs less by-products valued at standard price methodn Joint cost proration methodB.Noncost Methods of Accounting for By-ProductsNoncost methods make no attempt to alloca

32、te joint cost to the by-product or its inventory but instead make some credit either to income or to the main product.1.Other Income Methoda.The net sales of by-products for the current period is recognized as “Other Income” or “Miscellaneous Income” and is reported in the income statement. The mark

33、et value of by-product inventory, if material, should be reported in a footnote to the balance sheet.b.The other income method is used by those firms where:n The value of the by-product is small,n Any other allocation would be more expensive than the benefits received, orn Carrying by-products with

34、the main products would not appreciably affect the cost of the main product.c.Disadvantages of this method include the following:n Inventories on the balance sheet are misstated since no value is placed on the by-products.n Matching of revenues with expenses is improper if production of by-products

35、occurs in one accounting period and sales occur in another. No entry for by-products is made at the time of production, only at the time of sale.n No attempt is made to control the inventory of by-products and to prevent them from losses due to fraud or errors.2.By-Product Revenue Deducted from Main

36、 Product Costa.The net sales of by-products will be treated as a deduction from the cost of the main product.n Example:The beef-packing industry uses this method because of the great variety of products resulting from operations and the complexity of the processing.b.Disadvantages of this method inc

37、lude the following:n The method tends to understate the value of the main product.n The cost of the main product can vary from month to month because of the varying quantities of by-products sold.C.Cost Methods of Accounting for By-ProductsCost methods attempt to allocate some joint costs to by-prod

38、ucts and to carry inventories at the allocated cost levels.1.Replacement Cost MethodThe replacement cost method values the by-product inventory at its opportunity cost of purchasing or replacing the by-products.n Example:In the oil refining industry, increasing output of one product will cause a red

39、uction in the output and the profit of the other product.2.Total Costs Less By-Products Valued at Standard Price Methoda.By-products are valued at a standard price to avoid fluctuations in by-product value.b.The standard price approach shelters the main product cost from any fluctuations in the by-p

40、roduct price.c.The standard price may be set arbitrarily, or it may reflect an average price over time.d.A variance account is used to account for the difference between actual and standard prices.3.Joint Cost Proration MethodThe by-product is allocated some portion of the joint costs using any one

41、of the joint cost allocation methods mentioned in Section II. This method is rarely used in practice.Review textbook Exhibit 7-5, which summarizes the by-product accounting treatments.Learning Objective #4IV.Effect of Joint Product Costs on Cost Control and Decision MakingJoint product costing may a

42、ffect cost control and decision making in the following areas: output decisions, further processing of joint products, and pricing jointly produced products.A.Output Decisions1.Output decisions are normally based on the comparison of total cost of the joint products and the combined sales revenues f

43、or measuring profitability at any given point.2.If management cannot change the product mix or the product mix is determined by customer demand, cost allocation is useless for output decisions because the entire package has to be produced.B.Further Processing Decisions1.In making decisions on whethe

44、r to sell a joint product at split-off or to process it further, only the costs and revenues incurred after the split-off point are pertinent.2.Joint costs include those costs incurred prior to the split-off point and, thus, are considered sunk costs with respect to further processing decisions (tha

45、t is, the joint cost is not a relevant cost).C.Pricing Joint ProductsMethods used to set joint product prices include:1.Sales or market price methoda.This method maintains a constant relationship of cost to market prices, but it cannot be used to set prices since price has to be known in order to de

46、termine cost.b.The method is circular but useful in limited situations.n Example:The meat-packing industry uses the market value of by-products as an important determinant of the main products price.n Example:The natural gas industry uses it to justify prices and existing price relationships to regu

47、latory bodies. Joint cost allocation is used to determine inventory values, not as a basis to determine a cost to be used in price regulation.2.Historical market differentials between products methodWhen market differentials are stable over time, this method provides a guide to pricing individual pr

48、oducts by giving figures comparable to those of competitors.D.Pricing Based on Cost of Further ProductionThis method differs from the benefits-received approaches because it does not assign average cost based on physical or weighted units. It is different from the relative market value because the j

49、oint product itself does not have a market value.n Example:The practice of organ transplant sets the costs of the jointly available organs based on the eventual cost of the subsequent transplant operation.Learning Objective #5V.Joint Production of ServicesNormally services do not yield a true joint

50、output because a service can be directed to one effect rather than to two effects simultaneously.Joint cost allocation issues with services usually relate to pricing problems.n Example:An insurance company may allow only a portion of a massage therapy charge to be allocated to the therapeutic aspect

51、.n Example:The IRS might allow the cost of a two-day seminar as a deductible business expense. But if the seminar were offered on a cruise ship and spread out over a five-day period, the IRS would look closely if claimed as a deduction and not separated from the overall cost of the cruise.KEY TERMS

52、TESTFrom the list that follows, select the term that best completes each statement and write it in the space realizable value methodnoncost methodsphysical units methodreplacement cost methodsales-to-production-ratio methodsales-value-at-split-off methodseparable costssplit-off pointweight factor1.

53、Costs that are easily traced to individual products are _.2.The _ allocates joint production costs by comparing the percentage of sales to the percentage of production.3.The _ allocates joint production costs based on each products share of total units.4.The _ allocates joint production costs based

54、on each products share of revenue at the split-off point.5.The _ allocates joint production costs based on the proportionate share of the products eventual revenue less further processing costs.6.A(n) _ tries to incorporate the relative size of products or the difficulty to produce them.7._ make no

55、attempt to cost the by-product or its inventory.8.The _ is where the joint products become separate and identifiable.9.The _ values by-products at the opportunity cost of purchasing or replacing the products.MULTIPLE-CHOICE QUIZComplete each of the following statements by circling the letter of the

56、best answer.1.Which of the following is not an acceptable method of accounting for by-products?a.The revenue from the sale of by-products is credited to “Other Income.”b.The by-product is valued at its opportunity costs of purchasing or replacing the product.c.The revenue from the sale of by-product

57、s is deducted from the costs of the main products.d.The by-product is valued at a standard price; any fluctuations in the price are isolated in a variance account.e.All of the above methods are acceptable approaches to accounting for by-products.2.Which of the following is a true statement regarding

58、 joint costs?a.Joint costs are easily traced to individual products.b.The primary reason for allocating joint costs is to determine whether a product should be sold immediately or processed further.c.The primary reason for allocating joint costs is for inventory valuation for financial reporting.d.J

59、oint costs consist only of overhead, never of materials or direct labor.e.None of the above statements are true.3.Which of the following costs of a joint process would be allocated to the joint products?a.materials, labor, and overheadb.labor and overhead onlyc.materials and labor onlyd.conversion c

60、osts less by-product valuese.prime costs less by-product values4.The joint cost allocation method that yields the same gross margin percentage for each product is the: realizable value method.b.sales-to-production-ratio method.c.physical units method.d.constant gross margin percentage method.e.sales

61、-value-at-split-off method.5.The joint cost allocation method that assigns joint production costs based on the proportionate share of eventual revenues less further processing costs is the: realizable value method.b.sales-to-production-ratio method.c.physical units method.d.constant gross margin per

62、centage method.e.sales-value-at-split-off method.6.The secondary product recovered in the course of manufacturing a primary product during a joint process is:a.a by-product.b.a joint product.c.a replacement product.d.a split-off product.e.none of the above.7.Which of the following joint cost allocation methods is not acceptable for financial reporting under generally accepted accounting principles? realizable value methodb.sales-value-at-split-off methodc.physical units methodd.constant gross margin percentage methode.All of the methods are acceptable under GAAP.Use the following