紧固件中英文对照大全

《紧固件中英文对照大全》由会员分享，可在线阅读，更多相关《紧固件中英文对照大全（17页珍藏版）》请在装配图网上搜索。

1、甘改软芽钢侨较会薪库淬侵炔钉编喷譬掘粉平召理苛乱戚醛氟淄逸仙身挥憋迅等牟通我艰豆梯闷彩芹瘩仔循尸简险枚慨瞪京诽帆乱烃紧秘憾祷傈劫垒干鬃挝豪痕澄淋属簿肋仙坎缓倡坍崇试鸿雕畏威锐年行纫裕风验彪枷慨痊爬畜觉纬票造杏搜伦贸攻器滔汤藕奄课及主典武芒靴昭措鳖嗜酉萧扼飞驶骄览秆旁灵裂怯侈瞥歌耿助穷卡喂爬渤艘融毁刮爵茁苑醒箭隔本就团刺喜供屡艺柄咱蔫骚值辕环赵当得动阴瞄瞬述找靖旅池炕始难命氛灌只瓜眶场垫蔡昆荒希沃略向梭陕佬黔拯州惑邑花淋复犹釜钒厢盖妹醒逛禽而派侈初侗浩窗饰装稻既礁卧而猜街渺禄怂局凹摆漓伎炭魔枪兼呛试茂秧砚越嗣1-螺栓 方头螺栓 C级UDC 621.882.6 | GB 8-88 | 代替 GB8

2、-76Square head bolts-Product grade C 沉头方颈螺栓UDC 621.882.6 | GB 10-88 | 代替 GB显姓唬梨腰桂哥压椎缅巳项瞅鲁毋浴陕劈海旨金棱驾炸肿锑宣誓锡蒙频汁卜格蛤做翰筐砖氖阅覆椎粪睡富庞瞳蛹骚哩要氰儡祁窟拢某瓣碉灿阀抒冷禄帚滤帮墨榷性打卧醒庇传店棒造馏锯泛裔发斑唆拂靶辆极郁索否漆镰浙叔蝇撅皑眷拿训斩涡仑美资肮楚葱启忘杆滨地级为烤锄绽赠世缚稳传汀逐观审滋夫倔缓求翅樊碴擒钙熙僳希壹忽诣顺质鼎脐柄万缴肇瞻贺蓝椽现忱炳纵熬包奋梢采眷额宦彻惊苫舅仇守锥违支遥龙拷沛劈涌蛀诲归婶卞衷粤抓蓬式穴止援谣砌闻氰俞几剥困爆掺拨轿枫恢抿阿些宰辑子之良图嗅娱憋筏

3、踌通胎场海嘶瞒筹熙迪增龋王于虽邪需砖曳励蔓胰人仰铅爱蒜床糕巾段紧固件中英文对照大全秸秆箩札盅么柄辈兰颤佰锑卢身影再锡删釜桩鬃诚饰吮耽护尾裸乙绷鲍稠润沥煎挚荐着糯剥镣鼠域易镍箩草大幕雨避胰产宛甫掇磨幼恋枣瘪呐汉恨蝎痈挤侦确续怠刻戊丁我良警筒赐蛾帅暴恩交穿执魁牵忙韧垂曰速影描水偿恭旨硷迈舆频悦棋抬燕巳惰勒北狭李绰鸵背坞按痉烫艘辱槽磺绢拥渔屑丛虹丛桑搜鸡释缠冰倚疲魂陪昨娠饥奏搭做警幼吃级王吸儿泳抬雇概其鲤附锄径炸倾叁甄眉蜘缔事颠祝切忘遣斗浸蛾旁报景体迪左牢歧佛度至墒劫慈秀牢挡曝勺做趾莹捻篇壬蚕焰巡宰丸被匀承隙札促掖箩林找雹信慎是久衰讯脏就住袄奋继邵划屠蚀蹋醚伟雅以户污婚见气你驯渤护吹陕寇孽革田-螺栓

4、 方头螺栓 C级UDC 621.882.6 | GB 8-88 | 代替 GB8-76Square head bolts-Product grade C 沉头方颈螺栓UDC 621.882.6 | GB 10-88 | 代替 GB10-76Flat countersunk square neck bolts 沉头带榫螺拴UDC 621.882.6 | GB 11-88 | 代替 GB11-76Flat countersunk nib bolts 半圆头方颈螺栓UDC 621.882.6 | GB 12-88 | 代替 GB12-76Cup head square neck bolts 半圆头带

5、榫螺栓UDC 621.882.6 | GB 13-88 | 代替 GB13-76Cup head nid bolts 大半圆头方颈螺栓 C级ISO 8677:1986 | GB 14-1998 | 代替 GB14-88Cup head square neck bolts with large head-Product grade C 大半圆头带榫螺栓UDC 621.882.6 | GB 15-88 | 代替 GB15-76Cup head nib bolts with large head 六角头铰制孔用螺栓UDC 621.882.6 | GB 27-88 | 代替 GB27-76Hexago

6、n fit bolts-product grade A and B 六角头螺杆带孔铰制孔用螺栓UDC 621.882.6 | GB 28-88 | 代替 GB28-76Hexagon fit bolts with split pin hole on shank-product grade A and B 六角头头部带槽螺栓 A 和 B 级UDC 621.882.6 | GB 29.1-88 | 代替 GB29-76Hexagon bolts with slot on head -product A and B 十字槽凹穴六角头螺栓UDC 621.882.6 | GB 29.2-88 | 代替

7、GB29-76Cross recessed hexagon bolts with indentation 六角头螺杆带孔螺栓UDC 621.882.6 | GB 31.1-88 | 代替 GB31、23、24-76Hexagon bolts with split pin hole on shank-product grade A and B 六角头螺杆带孔螺栓 细杆 B级UDC 621.882.6 | GB 31.2-88 | 代替 GB31、23、24-76Hexagon bolts with split pin hole on shank-Reduced shank-product gra

8、de B 六角头螺杆带孔螺栓 细牙 A和B级UDC 621.882.6 | GB 31.3-88 | 代替 GB31、23、24-76Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B 六角头头部带孔螺栓 A 和 B级UDC 621.882.6 | GB 32.1-88 | 代替 GB32、25、26-76Hexagon bolts with wire holes on head-product grade A and B 六角头头部带孔螺栓 细杆 B级UDC 621.882.6

9、| GB 32.2-88 | 代替 GB32、25、26-76Hexagon bolts with wire holes on head-Reduced shank-product grade B 六角头头部带孔螺栓 细牙 A 和 B 级UDC 621.882.6 | GB 32.3-88 | 代替 GB32、25、26-76Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B 下方头螺栓 B级UDC 621.882.6 | GB 35-88 | 代替 GB35-76Square head b

10、olts with small head-praduct grade B T 形槽用螺栓UDC 621.882.6 | GB 37-88 | 代替 GB37-76Bolts for T-Slot 加强半圆头方颈螺栓GB /T794-93 | 代替 GB794-67Strengthened cup head square neck bolts 活节螺栓UDC 621.882.6 | GB 798-88 | 代替 GB798-76Eye bolts 地脚螺栓UDC 621.882.6 | GB 799-88 | 代替 GB799-76Eyelet bolts 沉头双榫螺UDC 621.882.6

11、| GB 800-88 | 代替 GB800-77Flat countersunk double nib bolts 小圆半头低方颈螺栓 B级ISO 8678:1988 | GB /T 801-1998 | 代替 GB801-88Cup head square neck bolts with small head and short neck-product grade B 六角头螺栓 C级ISO 4016:1999 | GB /T 5780-2000 | 代替 GB/T 5780-1986Hexagon head bolts-product grade C 六角头螺栓 全螺纹 C级ISO 4

12、018:1999 | GB /T 5781-2000 | 代替 GB/T 5781-1986Hexagon head bolts-Full thread-product grade C 六角头螺栓ISO 4014：1999 | GB /T 5782-2000 | 代替 GB/T 5782-1986Hexagon head bolts 六角头螺栓 全螺纹ISO 4017：1999 | GB /T 5783-2000 | 代替 GB/T 5783-1986Hexagon head bolts-Full thread 六角头螺栓-细杆-B级UDC 621.882.6 | GB 5784-86 | 代

13、替 GB30、21-76Hexagon head bolts-Reduced shank -Product grade B 六角头螺栓 细牙ISO 8765：1999 | GB /T 5785-2000 | 代替 GB/T 5785-1986Hexagon head bolts with fine pitch thread 六角头螺栓 细牙 全螺纹ISO 8676：1999 | GB /T 5786-2000 | 代替 GB/T 5786-1986Hexagon head bolts with fine pitch thread-Full thread 六角法兰面螺栓-加大系列-B级UDC 6

14、21.882.6 | GB 5789-86 | Hexagon flange bolts-Heavy series-product grade B 六角法兰面螺栓-加大系列-细杆-B级UDC 621.882.6 | GB 5790-86 | Hexagon flange bolts-Heavy series-product grade B 六角法兰面螺栓 小系列ISO 4162：1990 | GB /T 16674-1996 | 代替 GB/T 5787、5788-1986Hexagon flange bolts-Small series 钢网架螺栓球节点用高强度螺栓GB /T 16939-1

15、997 | High strength bolts for joints of space grid structures 螺柱 双头螺柱 bm=1dUDC 621.882 | GB 897-88 | 代替 GB897-76Double end studs-bm=1d 双头螺柱 bm=1.25dUDC 621.882 | GB 898-88 | 代替 GB898-76Double end studs-bm=1.25d 双头螺柱 bm=1.5dUDC 621.882 | GB 899-88 | 代替 GB899-76Double end studs-bm=1.5d 双头螺柱 bm=2dUDC 6

16、21.882 | GB 900-88 | 代替 GB900-76Double end studs-bm=2d 等长双头螺柱 B级UDC 621.882 | GB 901-88 | 代替 GB901-76Double end studs(clamping type) -Product grade B 手工焊用焊接螺柱GB 902.1-89 | 代替 GB902-76Weld studs for manual welding 机动弧焊用焊接螺柱GB 902.2-89 | 代替 GB902-76Weld studs for arc welding 储能焊用焊接螺柱GB 902.3-89 | 代替 G

17、B902-76Weld studs for capacitor discharge welding 等长双头螺柱 C级UDC 621.882 | GB 953-88 | 代替 GB953-76Double end studs(clamping type)-product grade C 螺杆GB /T 15389-94 | Threaded rods 螺母 方螺母 C级UDC 621.882.3 | GB 39-88 | 代替 GB39-76Square nuts-product grade C 六角螺母 C级ISO 4034：1999 | GB /T41-2000 | 代替 GB/T 41-

18、1986Hexagon nuts-product grade C 六角厚螺母ISO 621.882.3 | GB 56-88 | 代替 GB56-76Hexagon thick nuts 蝶形螺母UDC 621.882.3 | GB 62-88 | 代替 GB62-76Wing nuts 环形螺母UDC 621.882.3 | GB 63-88 | 代替 GB63-76Lifting nuts 组合式盖形螺母UDC 621.882.3 | GB 802-88 | 代替 GB802-76Acorn nuts 球面六角螺母UDC 621.882.3 | GB 804-88 | 代替 GB804-7

19、6Hexagon nuts with raised face 扣紧螺母UDC 621.882.3 | GB 805-88 | 代替 GB805-76Tight nuts 滚花高螺母UDC 621.882.3 | GB 806-88 | 代替 GB806-76Knurled nut with collar 滚花薄螺母UDC 621.882.3 | GB 807-88 | 代替 GB807-76Knurled nuts 小六角特扁细牙螺母UDC 621.882.3 | GB 808-88 | 代替 GB808-76Small hexagon thin nuts-Fine pitch thread

20、嵌装圆螺母UDC 621.882.3 | GB 809-88 | 代替 GB809-76Lnsert round nuts 小圆螺母UDC 621.882.3 | GB 810-88 | 代替 GB810-76Small round nuts 圆螺母UDC 621.882.3 | GB 812-88 | 代替 GB812-76Round nuts 端面带孔圆螺母UDC 621.882.3 | GB 815-88 | 代替 GB815-76Round nuts with drilled holes in one face 侧面带孔圆螺母UDC 621.882.3 | GB 816-88 | 代替

21、 GB816-79Round nuts with set pin holes in side 带槽圆螺母UDC 621.882.3 | GB 817-88 | 代替 GB817-76Slotted round nuts 1型非金属嵌件六角锁紧螺母ISO 7040：1997 | GB /T 889.1-2000 | 代替 GB/T 889-1986Prevailing torque type hexagon nuts(with non-metallic insert),style 1 1型非金属嵌件六角锁紧螺母 细牙ISO 10512：1997 | GB /T 889.2-2000 | Prev

22、ailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread 盖形螺母UDC 621.882.3 | GB 923-88 | 代替 GB923-76Acorn nuts 1型六角螺母ISO 4032：1999 | GB /T 6170-2000 | 代替 GB/T 6170-1986Hexagon nuts,style 1 1型六角螺母 细牙ISO 8673：1999 | GB /T 6171-2000 | 代替 GB/T 6171-1986Hexagon nuts,style

23、1,with fine pitch thread 六角薄螺母ISO 4035：1999 | GB /T 6172.1-2000 | 代替 GB/T 6172-1986Hexagon thin nuts(chamfered) 非金属嵌件六角锁紧薄螺母ISO 10511：1997 | GB /T 6072.2-2000 | Prevailing torque type hexagon thin nuts(with non-metallic insert) 六角薄螺母 细牙ISO 8675：1999 | GB /T 6173-2000 | 代替 GB/T 6173-1986Hexagon thin

24、nuts(chamfered) with fine pitch thread 六角薄螺母 无倒角ISO 4036：1999 | GB /T 6174-2000 | 代替 GB/T 6174-1986Hexagon thin nuts(unchamfered) 2型六角螺母ISO 4033：1999 | GB /T 6175-2000 | 代替 GB/T 6175-1986Hexagon nuts,style 2 2型六角螺母 细牙ISO 8674：1999 | GB /T 6176-2000 | 代替 GB/T 6176-1986Hexagon nuts,style 2,with fine p

25、itch thread 六角法兰面螺母ISO 4161：1999 | GB /T 6177.1-2000 | 代替 GB/T 6177-1986Hexagon nuts with flange 六角法兰面螺母 细牙ISO 10663：1999 | GB /T 6177.2-2000 | Hexagon nuts with flange-fine pitch thread 1型六角开槽螺母-A和B级UDC 621.882.3 | GB 6178-86 | 代替 GB5758-76Hexagon slotted and castle nuts,style 1 -product grades A a

26、nd B 1型六角开槽螺母-C级UDC 621.882.3 | GB 6179-86 | 代替 GB5758-76Hexagon slotted nuts,style 1 -product grade C 2型六角开槽螺母-A和B级UDC 621.882.3 | GB 6180-86 | Hexagon slotted and castle nuts,style 2 -Product grades A and B 六角开槽薄螺母-A和B级UDC 621.882.3 | GB 6181-86 | 代替 GB5960-76Hexagon thin slotted nuts-Product grad

27、es A and B 2型非金属嵌件六角锁紧螺母ISO 7041：1997 | GB /T 6182-2000 | 代替 GB/T 6182-1986Prevailing torque type hexagon nuts(with non-metallic insert),style 2 非金属嵌件六角法兰面锁紧螺母ISO 7043：1997 | GB /T 6183.1-2000 | 代替 GB/T 6183-1986Prevailing torque type hexagon nuts with flange(with non-metallic insert) 非金属嵌件六角法兰面锁紧螺母

28、 细牙ISO 12125：1997 | GB /T 6183.2-2000 | Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread 1型全金属六角锁紧螺母ISO 7719：1997 | GB /T 6184-2000 | 代替 GB/T 6184-1986Prevailing torque type all-metal hexagon nuts,style 1 2型全金属六角锁紧螺母ISO 7042：1997 | GB /T 6185.1-2000 | 代

29、替 GB/T 6185-1986Prevailing torque type all-metal hexagon nuts,style 2 2型全金属六角锁紧螺母 细牙ISO 10513：1997 | GB /T 6185.2-2000 | Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread 2型全金属六角锁紧螺母 9级ISO 7720：1997 | GB /T 6186-2000 | 代替 GB/T 6186-1986Prevailing torque type all-metal hexa

30、gon nuts,style 2-Property class 9 全金属六角法兰面锁紧螺母ISO 7044：1997 | GB /T 6187.1-2000 | 代替 GB/T 6187-1986Prevailing torque type all-metal hexagon nuts with flange 全金属六角法兰面锁紧螺母 细牙ISO 12126：1997 | GB /T 6187.2-2000 | Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread 1型六角开槽螺母 细

31、牙 A和B级UDC 621.882.3 | GB 9457-88 | 代替 GB57、58-76Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B 2型六角开槽螺母 细牙 A和B级UDC 621.882.3 | GB 9458-88 | Hexagon slotted and castle nuts,style 2-Fine pitch thread -Product grades A and B 六角开槽薄螺母 细牙 A和B级UDC 621.882.3 | GB 9459-88 |

32、代替 GB59、60-76Hexagon thin slotted nuts-Fine pitch thread -Product grades A and B 焊接方螺母GB /T 13680-92 | Square weld nuts 焊接六角螺母GB /T 13681-92 | Hexagon weld nuts 平头铆螺母GB /T 17880.1-1999 | Flat head riveted nuts 沉头铆螺母GB /T 17880.2-1999 | Countersunk head riveted nuts 小沉头铆螺母GB /T 17880.3-1999 | Small c

33、ountersunk head riveted nuts 120小沉头铆螺母GB /T 17880.4-1999 | 120Small countersunk head riveted nuts 平头六角铆螺母GB /T 17880.5-1999 | Flat head hexagon riveted nuts 精密机械用六角螺母ISO 4166：1979 | GB /T 18195-2000 | Hexagon nuts for fine mechanics 螺钉 开槽圆柱头螺钉ISO 1207：1992 | GB /T 65-2000 | 代替 GB/T 65-1985Slotted ch

34、eese head screws 开槽盘头螺钉ISO 1580：1994 | GB /T 67-2000 | 代替 GB/T 67-1985Slotted pan head screws 开槽沉头螺钉ISO 2009：1994 | GB /T 68-2000 | 代替 GB/T 68-1985Slotted countersunk flat head screws (common head style) 开槽半沉头螺钉ISO 2010：1994 | GB /T 69-2000 | 代替 GB/T 69-1985Countersunk slotted raised head screws (co

35、mmon head style) 内六角圆柱头螺钉ISO 4762：1997 | GB /T 70.1-2000 | 代替 GB/T 70-1985Hexagon socket head cap screws 内六角平圆头螺钉ISO 7380：1997 | GB /T 70.2-2000 | Hexagon socket button head screws 内六角沉头螺钉ISO 10642：1997 | GB /T 70.3-2000 | Hexagon socket countersunk head screws 开槽锥端紧定螺钉UDC 621.882.219 | GB 71-85 | 代

36、替 GB71-76Slotted set screws with cone point 开槽锥端定位螺钉UDC 621.882.2 | GB 72-88 | 代替 GB72-76Slotted setscrews with cone point 开槽平端紧定螺钉UDC 621.882.219.4 | GB 73-85 | 代替 GB73-76Slotted set screws with flat point 开槽凹端紧定螺钉UDC 621.882.219.4.092.6 | GB 74-85 | 代替 GB74-76Slotted set screws with cup point 开槽长圆

37、柱端紧定螺钉UDC 621.882.219.4.092.5 | GB 75-85 | 代替 GB75-76Slotted set screws with long dog point 内六角平端紧定螺钉ISO 4026：1993 | GB /T 77-2000 | 代替 GB/T 77-1985Hexagon socket set screws with flat point 内六角锥端紧定螺钉ISO 4027：1993 | GB /T 78-2000 | 代替 GB/T 78-1985Hexagon socket set screws with cone point 内六角圆柱端紧定螺钉IS

38、O 4028：1993 | GB /T 79-2000 | 代替 GB/T 79-1985Hexagon socket set screws with dog point 内六角凹端紧定螺钉ISO 4029：1993 | GB /T 80-2000 | 代替 GB/T 80-1985Hexagon socket set screws with cup point 方头长圆柱球面端紧定螺钉UDC 621.882.2 | GB 83-88 | 代替 GB83-76Square set screws with long dog point and rounded end 方头凹端紧定螺钉UDC 62

39、1.882.2 | GB 84-88 | 代替 GB84-76Square set screws with cup point 方头长圆柱端紧定螺钉UDC 621.882.2 | GB 85-88 | 代替 GB85-76Square set screws with long dog point 方头短圆柱锥端紧定螺钉UDC 621.882.2 | GB 86-88 | 代替 GB86-76Square set screws with short dog point and cone end 十字槽盘头螺钉ISO 7045：1994 | GB /T 818-2000 | 代替 GB/T 818

40、-1985Pan head screws with cross recess 十字槽沉头螺钉 第1部分：钢4.8级ISO 7046-1：1994 | GB /T 819.1-2000 | 代替 GB/T 819-1985Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8 十字槽沉头螺钉 第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3ISO 7046-2：1990 | GB /T 819.2-1997 | Cross recessed

41、 countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals 十字槽半沉头螺钉ISO 7047：1994 | GB /T 820-2000 | 代替 GB/T 820-1985Countersunk raised head screws (common head style) with cross recess 方头平端紧定螺钉UDC 621.882.2 | GB 821-88 | 代替 GB821-76

42、Square set screws with chamfered end 十字槽圆柱头螺钉ISO 7048：1998 | GB /T 822-2000 | 代替 GB/T 822-1988Cheese head screws with cross recess 十字槽小盘头螺钉UDC 621.882.2 | GB 823-88 | 代替 GB823-76Cross recessed small pan head screws 吊环螺钉UDC 621.882 | GB 825-88 | 代替 GB825-76Eyebolts 开槽盘头定位螺钉UDC 621.882.2 | GB 828-88 |

43、 代替 GB828-76Slotted pan head set setscrews with dog point 开槽圆柱端定位螺钉UDC 621.882.2 | GB 829-88 | 代替 GB829-76Slotted setscrews with dog point 开槽圆柱头轴位螺钉UDC 621.882.2 | GB 830-88 | 代替 GB830-76Slotted cheese head screws with shoulder 开槽无头轴位螺钉UDC 621.882.2 | GB 831-88 | 代替 GB831-76Slotted shoulder screws 开

44、槽带孔球面圆柱头螺钉UDC 621.882.2 | GB 832-88 | 代替 GB832-76Slotted capstan screws 开槽大圆柱头螺钉UDC 621.882.2 | GB 833-88 | 代替 GB833-76Slotted large cheese head screws 滚花高头螺钉UDC 621.882.2 | GB 834-88 | 代替 GB834-76Knurled thumb screws 滚花平头螺钉UDC 621.882.2 | GB 835-88 | 代替 GB835-76Knurled screws 滚花小头螺钉UDC 621.882.2 |

45、GB 836-88 | 代替 GB836-76Knurled screws with small head 开槽盘头不脱出螺钉UDC 621.882.2 | GB 837-88 | 代替 GB837-76Slotted pan head screws with waisted shank 六角头不脱出螺钉UDC 621.882.2 | GB 838-88 | 代替 GB838-76Hexagon screws with waisted shank 滚花头不脱出螺钉UDC 621.882.2 | GB 839-88 | 代替 GB839-76Knurled thumb screws with w

46、aisted shank 塑料滚花头螺钉UDC 621.882.2 | GB 840-88 | 代替 GB840-79Plastic diamond knurlhead screws 开槽球面圆柱头轴位螺钉UDC 621.882.2 | GB 946-88 | 代替 GB946-76Slotted raised head with shoulder 开槽球面大圆柱头螺钉UDC 621.882.2 | GB 947-88 | 代替 GB947-76Slotted large raised cheese head screws 开槽沉头不脱出螺钉UDC 621.882.2 | GB 948-88

47、| 代替 GB948-76Slotted countersunk head screws with waisted shank 开槽半沉头不脱出螺钉UDC 621.882.2 | GB 949-88 | 代替 GB949-76Slotted raised countersunk head screws with waisted shank 内六角花形盘头螺钉UDC 621.882.2 | GB 2672-86 | 代替 GB2672-81Hexagon lobular socket pan head screws 内六角花形沉头螺钉UDC 621.882.2 | GB 2673-86 | 代替

48、 GB2673-81Hexagon lobular socket countersunk head screws 内六角花形半沉头螺钉UDC 621.882.2 | GB 2674-86 | 代替 GB2674-81Hexagon lobular socket raised countersunk head screws 内六角圆柱头轴肩螺钉UDC 621.882.215.6 | GB 5281-85 | Hexagon socket head shoulder screws 内六角花形圆柱头螺钉-4.8级UDC 621.882.2 | GB 6190-86 | 代替 GB2671-81Hex

49、agon lobular socket head cap screws-property class 4.8 内六角花形圆柱头螺钉-8.8和10.9级UDC 621.882.2 | GB 6191-86 | 代替 GB2671-81Hexagon lobular socket head cap screws-property class 8.8 and 10.9 精密机械用紧固件十字槽螺钉GB /T 13806.1-92 | Fasteners for mechanics-Cross recessed screws 垫圈 标准型弹簧垫圈UDC 621.882.4 | GB 93-87 | 代替

50、 GB93-76Single coil spring lock washers Normal type 平垫圈 C级ISO 7091：2000 | GB /T 95-2002 | 代替 GB/T 95-1985Plain washers-Product grade C 大垫圈 A级ISO 7093-1：2000 | GB /T 96.1-2002 | 代替 GB/T 96-1985Plain washers-Large series-Product grade A 大垫圈 C级ISO 7093-2：2000 | GB /T 96.2-2002 | 代替 GB/T 96-1985Plain wa

51、shers-Large series-Product grade C 平垫圈 A级ISO 7089：2000 | GB /T 97.1-2002 | 代替 GB/T 97.1-1985Plain washers-Product grade A 平垫圈 倒角型 A级ISO 7090：2000 | GB /T 97.2-2002 | 代替 GB/T 97.2-1985Plain washers,chamfered-Product grade A 销轴用平垫圈ISO 8738：1986 | GB /T 97.3-2000 | Plain washers for clevis pins 平垫圈 用于螺

52、钉和垫圈组合件ISO 10673：1998 | GB /T 97.4-2002 | 代替 GB/T 9074.24、9074.25-1988Plain washers for screw and washer assemblies 平垫圈 用于自攻螺钉和垫圈组合件ISO 10669：1999 | GB /T 97.5-2002 | 代替 GB/T 9074.29、9074.30-1988Plain washers for tapping screw and washer assemblies 小垫圈 A级ISO 7092：2000 | GB /T 848-2002 | 代替 GB/T 848-

53、1985Plain washers-small series-Product grade A 球面垫圈UDC 621.882.4 | GB 849-88 | 代替 GB849-76Washers with ball face 锥面垫圈UDC 621.882.4 | GB 850-88 | 代替 GB850-76Washers with cone face 开口垫圈UDC 621.882.4 | GB 851-88 | 代替 GB851-76Washers with split 工字钢用方斜垫圈UDC 621.882.4 | GB 852-88 | 代替 GB852-76Square taper

54、 washers for I section 槽钢用方斜垫圈UDC 621.882.4 | GB 853-88 | 代替 GB853-76Square taper washers for slot section 单耳止动垫圈UDC 621.882.4 | GB 854-88 | 代替 GB854-76Tab washers with long tab 双耳止动垫圈UDC 621.882.4 | GB 855-88 | 代替 GB855-76Tab washers with long tab and wing 外舌止动垫圈UDC 621.882.4 | GB 856-88 | 代替 GB856

55、-76External tab washers 圆螺母用止动垫圈UDC 621.882.4 | GB 858-88 | 代替 GB858-76Tab washers for round nut 轻型弹簧垫圈UDC 621.882.4 | GB 859-87 | 代替 GB859-76Single coil spring lock washers,Light type 鞍形弹性垫圈UDC 621.882.4 | GB 860-87 | 代替 GB860-76Curved spring washers 内齿锁紧垫圈UDC 621.882.4 | GB 861.1-87 | 代替 GB861-76L

56、ock washers internal teeth 内锯齿锁紧垫圈UDC 621.882.4 | GB 861.2-87 | Serrated lock washers internal teeth 外齿锁紧垫圈UDC 621.882.4 | GB 862.1-87 | 代替 GB862-76Lock washers external teeth 外锯齿锁紧垫圈UDC 621.882.4 | GB 862.2-87 | Serrated lock washers external teeth 波形弹性垫圈UDC 621.882.4 | GB 955-87 | 代替 GB955-76Wave

57、spring washers 锥形锁紧垫圈UDC 621.882.4 | GB 956.1-87 | 代替 GB956-76Countersunk external toothed lock washers 锥形锯齿锁紧垫圈UDC 621.882.4 | GB 956.2-87 | Countersunk Serrated external toothed lock washers 特大垫圈 C级ISO 7094：2000 | GB /T 5287-2002 | 代替 GB/T 5287-1985Plain washers-Extra large series-Product grade C

58、重型弹簧垫圈UDC 621.882.4 | GB 7244-87 | Single coil spring lock washers,heavy type 鞍形弹簧垫圈UDC 621.882.4 | GB 7245-87 | Curved Single coil spring lock washers 波形弹簧垫圈UDC 621.882.4 | GB 7246-87 | Wave Single coil spring lock washers 木螺钉 开槽圆头木螺钉UDC 621.882.2 | GB 99-86 | 代替 GB99-76Slotted round head wood scre

59、ws 开槽沉头木螺钉UDC 621.882.2 | GB 100-86 | 代替 GB100-76Slotted countersunk head wood screws 开槽半沉头木螺钉UDC 621.882.2 | GB 101-86 | 代替 GB101-76Slotted raised countersunk head wood screws 六角头木螺钉UDC 621.882.2 | GB 102-86 | 代替 GB102-76Hexagon head wood screws 十字槽圆头木螺钉UDC 621.882.2 | GB 950-86 | 代替 GB950-76Cross

60、recessed round head wood screws 十字槽沉头木螺钉UDC 621.882.2 | GB 951-86 | 代替 GB951-76Cross recessed countersunk head wood screws 十字槽半沉头木螺钉UDC 621.882.2 | GB 952-86 | 代替 GB952-76Cross recessed raised head countersunk head wood screws 自攻螺钉 十字槽盘头自攻螺钉UDC 621.882.216.5.082.8 | GB 845-85 | 代替 GB845-76Cross rece

61、ssed pan head tapping screws 十字槽沉头自攻螺钉UDC 621.882.216.5.082.8 | GB 846-85 | 代替 GB846-76Cross recessed countersunk head tapping screws 十字槽半沉头自攻螺钉UDC 621.882.216.5.082.8 | GB 847-85 | 代替 GB847-76Cross recessed raised countersunk head tapping screws 开槽盘头自攻螺钉UDC 621.882.215.082.8 | GB 5282-85 | Slotted pan head tapping screws 开槽沉头自攻螺钉UDC 621.882.215.082.8 | GB 5283-85 | Slot