《组网实验报告》word版
![《组网实验报告》word版_第1页](https://file5.zhuangpeitu.com/fileroot5/2022-7/26/58e9a3e4-b964-4355-840a-82888df8ef64/58e9a3e4-b964-4355-840a-82888df8ef641.gif)
![《组网实验报告》word版_第2页](/images/s.gif)
![《组网实验报告》word版_第3页](/images/s.gif)
《《组网实验报告》word版》由会员分享,可在线阅读,更多相关《《组网实验报告》word版(21页珍藏版)》请在装配图网上搜索。
1、组网技术实验报告学 号:姓 名:提交日期:东北大学秦皇岛分校【实验编号】1【实验名称】研究应用层和传输层协议【实验内容】从PC使用URL捕获Web请求运行模拟并捕获通信研究捕获的通信【实验结论】【实验编号】2【实验名称】检查路由【实验内容】使用route命令查看PT-PC路由表使用命令提示符telnet连接到Cisco路由器使用基本的Cisco IOS命令检查路由器的路由【实验结论】【实验编号】3【实验名称】研究ICMP数据包【实验内容】了解ICMP数据包的格式使用Packet Tracer捕获并研究ICMP报文【实验结论】【实验编号】4【实验名称】子网和路由器配置【实验内容】根据要求划分子网
2、的地址空间分配适当的地址给接口并进行记录配置并激活Serial和FastEthernet接口测试和验证配置思考网络实施并整理成文档【实验结论】R1(config)#interface FastEthernet0/0R1(config-if)#R1(config-if)#exitR1(config)#interface Serial0/0/0R1(config-if)#R2(config)#interface FastEthernet0/0R2(config-if)#R2(config-if)#exitR2(config)#interface Serial0/0/0R2(config-if)#
3、PC1运行ping Pinging 192.168.1.33 with 32 bytes of data:Reply from 192.168.1.33: bytes=32 time=28ms TTL=255Reply from 192.168.1.33: bytes=32 time=8ms TTL=255Reply from 192.168.1.33: bytes=32 time=12ms TTL=255Reply from 192.168.1.33: bytes=32 time=15ms TTL=255Ping statistics for 192.168.1.33: Packets: S
4、ent = 4, Received = 4, Lost = 0 (0% loss),Approximate round trip times in milli-seconds: Minimum = 8ms, Maximum = 28ms, Average = 15msCheck Result结果【实验编号】5【实验名称】研究第2层帧头【实验内容】研究网络运行模拟【实验结论】【实验编号】6【实验名称】地址解析协议(ARP)【实验内容】使用Packet Tracer的arp命令使用Packet Tracer检查ARP交换【实验结论】Packet Tracer PC Command Line 1.0
5、PCarpPacket Tracer PC ARPDisplay ARP entries: arp -aClear ARP table: arp -dPinging 255.255.255.255 with 32 bytes of data:Request timed out.Reply from 172.16.254.1: bytes=32 time=5ms TTL=255Reply from 172.16.254.1: bytes=32 time=5ms TTL=255Reply from 172.16.254.1: bytes=32 time=5ms TTL=255PCarp -a In
6、ternet Address Physical Address Type 172.16.254.1 0001.43a6.3585 dynamicPCarp -dPinging 255.255.255.255 with 32 bytes of data:Reply from 172.16.254.1: bytes=32 time=3ms TTL=255Reply from 172.16.254.1: bytes=32 time=2ms TTL=255Reply from 172.16.254.1: bytes=32 time=2ms TTL=255Reply from 172.16.254.1:
7、 bytes=32 time=2ms TTL=255【实验编号】7【实验名称】中间设备用作终端设备【实验内容】捕获Telnet会话的建立过程研究PC上Telnet数据包的交换【实验结论】Packet Tracer PC Command Line 1.0Pinging 172.16.254.1 with 32 bytes of data:Request timed out.Reply from 172.16.254.1: bytes=32 time=3ms TTL=255Reply from 172.16.254.1: bytes=32 time=5ms TTL=255Reply from 17
8、2.16.254.1: bytes=32 time=5ms TTL=255Ping statistics for 172.16.254.1: Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),Approximate round trip times in milli-seconds: Minimum = 3ms, Maximum = 5ms, Average = 4msTrying 172.16.254.1 .Open * This is Lab switch S1-Central. Authorized access only. *Us
9、er Access VerificationPassword: S1-Central【实验编号】8【实验名称】管理设备配置【实验内容】执行基本的路由器配置备份路由器配置文件从TFTP服务器将备份配置文件重新加载到路由器的RAM中保存新的运行配置到NVRAM【实验结论】Router#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#interface FastEthernet0/0Router(config-if)#no shutdownRouter(config)#line vty
10、0 4Router(config-line)#loginRouter(config-line)#password ciscoRouter(config-line)#exitRouter(config)#line console 0Router(config-line)#password ciscoRouter(config-line)#loginRouter(config-line)#exitRouter(config)#enable password ciscoRouter(config)#enable secret classRouter(config)#interface FastEthernet0/0Router(config-if)#banner motd # this is a secure System.Authorized Access only #
- 温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 装配图网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。