SAEJ2208自动变速器驻车标准

《SAEJ2208自动变速器驻车标准》由会员分享，可在线阅读，更多相关《SAEJ2208自动变速器驻车标准（6页珍藏版）》请在装配图网上搜索。

1、应用范围：乘用车JAC |安徽江淮汽车股份有限公司编号Q/JQ制定部门：乘用车研 究院、标准法规部企业技术标准采标号一SAE J2208标题:第1页共6页PARK STANDARD FOR AUTOMATIC TRANSMISSIONS自动变速器驻车标准目录前言FOREWORD前 言3333SCOPE 范围 REFERENCES- 参考书目 DEFINITIONS 定义 TESTS 试验 REFERENCE SECTION -参考标准 修订标记_标准化制定更改内容 会签 审核修订页修订日期发布日期修订者实施日期应用范围：所有类型AC安徽江淮汽车股份有限公司Q/JQ标题:PARK STANDAR

2、D FOR AUTOMATIC TRANSMISSIONS自动变速器驻车标准刖百本标准Q/JQ XXXX-2007自动变速器驻车标准是公司技术基础性标准之本标准为公司统一执行的企业标准。本标准适用于安徽江淮汽车股份（集团）有限公司生产的乘用车。本标准是参照欧洲SAE J2208 自动变速器驻车标准标准进行全文翻译。未对其中的内容作任何变更或修改， 仅对其中的计量单位进行了标准化。 并采用 中英文对照形式表达。本标准由安徽江淮汽车股份有限公司技术中心乘用车研究院提出。本标准由安徽江淮汽车股份有限公司技术中心标准法规部归口管理。本标准主要起草单位：江淮汽车股份有限公司技术中心乘用车研究院、标准法规

3、部。本标准主要起草人：韩震、华从波、贾美霞本标准批准人：本标准版本为首次发布。应用范围：所宿类型JAC安徽江淮汽车股份有限公司编号Q/JQ标题：PARK STANDARD FOR AUTOMATIC TRANSMISSIONS自动变速器驻布标准第3页共6页Foreword刖 百This Documenthas not changed other than to put it into the newSAETechnical Standards Board Format.本文没有改变新的SAEg术标准版本格式。1 Scope1范围To provide a Recommendedractice f

4、or validating the function and integrity of an automatic transmission park mechanismwith its associated control system and environment.本文提供了一个推荐性标准用于确定自动变速器驻车装置控制系统和外界功能和 完整性。1.1 Purpose To define the requirements for parking mechanisms of automatic transmissions through evaluation in designed usage

5、s.1.2 目的一定义了自动变速器驻车装置需求，通过评价有计划的使用方法。1.3 Vehicle Application Encompasses all vehicle usages, up to maximum GVW, with all available production released axle ratios.1.4 车辆应用-包括所有的车辆使用方法，在最大总重量GVWF,和所有的可用装备时的轴荷比。2 References2参考书目2.1 Applicable PublicationsThe following publications form a part of thiss

6、pecification to the extent specified herein. The latest issue of SAE publications shall apply.2.2 规范性引用文件一下列文件中的条款通过本标准的引用而成为本标准的条款。其 最新版本适用于本标准。2.2.1 SAEPUBLICATIONISAvailable from SAE, 400 CommonwealthDrive, Warren dale, PA 15096-0001.SAEft准SAE HS J447 Prevention of Corrosion of Motor Vehicle Body

7、 and Chassis ComponentsSAE HS J44J机动车辆车身及底盘部件的防腐SAE J1083 Unauthorized Starting or Movement of Machines应用范围：所宿类型JAC安徽江淮汽车股份有限公司编号Q/JQ标题：PARK STANDARD FOR AUTOMATIC TRANSMISSIONS自动变速器驻布标准第4页共6页SAE J1083-机械未经许可的启动或移动SAE J1145 Emissions Terminology and NomenclatureSAE J1145-排放物定义和术语2.2.2 FMVSSAND CMVSS

8、PUBLICATIONSAvailable from the Superintendent of Documents. U.S. Government Printing Office, Washington, DC 20402.FMVSS口 CMVS标准一有用的文件负责人，U.S.政府办公室，华盛顿，DC 20402.FMVSS 105/75CMVSS 1053 Definitions3定义3.1 Control System Defined in SAE J1083 JUL85 (those systems which, when activated, impart motion to th

9、e machine or any of its working tools) is further defined here to include the hardware/logic (if applicable), shift lever/mechanism (operator actuator device), and as being external to the transmission.3.2 控制系统一在SAEJ1083 JUL85(那些系统，活性的，给予机械动作或它的运转的 工具)的详细说明比本文有更加深层次的定义，包括硬件/逻辑(如果适用的话)，变速控制杆/机械装置(操作员

10、激励装置)，并且同样存在外部的传输。3.3 Ratchet The activity of the park pawl and gear which occurs with the transmission in Park detent and the pawl unable to engage the park gear due to the gears rotating above a given velocity.3.4 棘齿一对驻车棘爪和齿轮传动装置的作用行为产生驻车效果。3.5 Pull Out The operator-initiated action of disengaging

11、 the parking pawl from the parking gear.3.6 汽车驶离路边一驾驶员开始作用驻车齿轮传动装置分离驻车棘爪。3.7 Gross Vehicle Weight (GVW)-The manufacturers gross weight rating, consisting of the curb weight plus payload (SAE J1145a).3.8 车辆总重量(GVWV一制造商规定的额定总质量，由整备质量加有效载荷组成(SAE J1145a).4 Tests4试验4.1 FMVSS 105/75, CMVSS 105- Mandatory

12、requirement for all portions relating to automatic transmission park mechanism (including impact barrier test).应用范围：所宿类型JAC安徽江淮汽车股份有限公司编号Q/JQ标题：PARK STANDARD FOR AUTOMATIC TRANSMISSIONS自动变速器驻布标准第5页共6页4.1 FMVSS05/75, CMVSS05强制性要求对于所有自动变速器驻车装置关联部分（包 括冲击屏障试验）.4.2 Ratchet test is conducted:4.3 棘齿试验规范：a.

13、 To assure ratchet above a target speed.a.确保棘齿超过一个目标速度.b. To assure engagement.b.确保接合.c. As an abuse test.d. 一次非正常使用条件下的试验.e. As indicated in Table 1.d.简要的说明见表1.TABLE 1 RATCHET TEST, CURRENT INDUSTRY PRACTICE 表1一棘齿试验，当前行业惯例Test Track试验途径Level级别Ratchet to Engagement棘齿接合Cycles循环50 to 100 cycles50100循环

14、Vehicle Speed车辆速度5 to 40 mph5 40 mphEngagement Speed (Target)接合速度(目标)2 to 4 mph24 mph4.3 Pull out effort test is conducted:4.4 汽车驶离路边试验规范：a. To assure pull out capable.a.确保汽车驶离路边是有可能的.b. To assure engagement at or below targeted engagement speed.b.确保接合时在目标速度之上或之下.c. As indicated in Table 2.c.简要的说明见表

15、2.TABLE 2- PULL OUT EFFORT TEST, CURRENT INDUSTRY PRACTICE 表2一汽车驶离路边试验，当前行业惯例Test试验Practice 惯例Test Track试验途径30 to 32% Grade3032 %评分应用范围：JAC安徽江淮汽车股份有限公司编号所有类型Q/JQ标题：PARK STANDARD FOR AUTOMATIC TRANSMISSIONS 第 6 页自动变速器驻车标准Vehicle Application 车辆应用Max GVW最大总质量Number of Cycles 循环次数40 to 20040 2004.5 Othe

16、r tests are conducted as determined by the manufacturer to satisfy unique or specific conditions.4.6 其它的试验是由制造商定义的，满意的唯一的或特殊的条件。PREPARED BY THE SAE PARK SYSTEM COMMITTEE 由SAE驻车制动委员会制定 SAE J2208 Issued JUN93 SAE J2208发行于93年六月 Rationale Not applicable.基本原理一不适用的.Relationship of SAE Standard to ISO Stan

17、dard -Not applicable.SAE标准和ISO标准的关联一不适用的.Application To provide a RecommendePractice for validating the function and integrity of an automatic transmission park mechanism with its associated control system and environment.应用一规定一个推荐的惯例确认一个自动变速器驻车装置功能和完整以及关联控 制系统和环境性。Reference Section参考标准SAE HS J447 P

18、revention of Corrosion of Motor Vehicle Body and Chassis ComponentsSAE HS J44J机动车辆车身及底盘部件的防腐SAE J1083 Unauthorized Starting or Movement of MachinesSAE J1083-机械未经许可的启动或移动SAE J1145 Emissions Terminology and NomenclatureSAE J1145-排放物定义和术语FMVSS 105/75CMVSS 105Developed by the SAE Park System Committee由SAE驻车系统委统委员会修订